Harshdeep Industries Kathwada, Ahmedabad, Gujarat

Woven Roving is made from continuous glass fiber roving which are interlaced into heavy weight fabrics. Compatible with most resin systems. Used in most cases to increase the flexural and impact strength of laminates. Ideal for multi-layer hand lay-up applications where great material strength is required. Good drapeability, wet out and cost effective. With Woven Roving as a general rule estimate the resinreinforcement ratio at 1:1 by weight. Woven Roving is available in a variety of weaves, weights, widths and finishes to suit a wide range of applications. Woven roving is weaved specially according to the customers requirment ranging from 200 GSM to 1200 GSM. The weaves can be unidirectional or plain weaves. Available in sizes ranging from 10" to 100" according to the requirment.

With thorough knowledge of variegated industry aspects, we have been able to offer a range of Welding Blanket. These are made by a team of deft experts using fiberglass fabric with varied coatings such as vermiculite, neoprene, graphite, acrylic, polyurethane & polyvinyl chloride. All our products are widely acclaimed in the market for their properties of perfect structure, electrical insulation, anti-oxidation and high temperature resistance. For meeting then diverse needs of the clients, we offer these blankets in various thickness from 0.25mm to 3.0mm. Our offered products are extensively demanded by the clients due to not only providing protection from sparks, spatter and slag, but for also insulating rays and offering safety, clean and normative environment during welding and cutting applications. Further, all our products are widely praised in the market due to being judged non-carcinogen from international cancer institution.

With our expertise in this domain, we are able to offer a superior quality range of Vermiculite Coated Glass Cloth. These are made from a fiberglass base cloth that are coated one side or both sides with specially compounded vermiculite. The vermiculite enhances the strength, high temperature insulation ozone, fireproof, flame, increase resistance to abrasion and high heat. Clients can avail these products from us in thicknesses varying from 0.50mm to 2.5mm.

Owing to the sound experience of the market, we have been able to offer PTFE Coated Fibreglass Open Mesh Fabric Conveyor Belt. These are offered by us in upto maximum width of 4200mm, having both edges reinforced and with varied types of joints to suit the diverse needs of customers. The products we offer are widely used for rotary printing and relaxo dryers for textile & silk printing, non-woven textile and dyeing. Our offered belts are also utilized in shrink packers, paper glazing & waxing, food baking, high frequency UV dryers and quick frozen machines. All our products considered suitable splices for dryer belts as the bull nose joint of these belts are made of specially woven open weave mesh from Kevlar thread. These strong seams are then stitched to the belts ends for having an open weave mesh seam that does not block airflow. Our offered products have alligator joint strong splice, constructed with S.S. metal alligator lacing via which a pin is placed to accomplish the entire splice. Clients can avail from us a range of edge reinforcements for belts in so as to prevent the belt edges from wear, abrasion and snagging. Further, the reinforcements of our products strengthen the sides and support guide strips, dots & other guiding & tracking devices.

Owing to the sound experience of the market, we have been able to offer PTFE Coated Fibreglass Open Mesh Fabric Conveyor Belt. These are offered by us in upto maximum width of 4200mm, having both edges reinforced and with varied types of joints to suit the diverse needs of customers. The products we offer are widely used for rotary printing and relaxo dryers for textile & silk printing, non-woven textile and dyeing. Our offered belts are also utilized in shrink packers, paper glazing & waxing, food baking, high frequency UV dryers and quick frozen machines. All our products considered suitable splices for dryer belts as the bull nose joint of these belts are made of specially woven open weave mesh from Kevlar thread. These strong seams are then stitched to the belts ends for having an open weave mesh seam that does not block airflow. Our offered products have alligator joint strong splice, constructed with S.S. metal alligator lacing via which a pin is placed to accomplish the entire splice.

Glass fabrics coated with silicone rubber are made by the experts using fiberglass base cloth and impregnated one side or both sides with a compounded silicone rubber that enhances strength, temperature insulation ozone, fireproof, oxygen, weather, sun and oil workability. Customers can avail these products from us in thicknesses varying from 0.25mm to 3mm. Moreover, these products are widely used in used in aerospace and chemical industries.

Being a customer-focused firm, we strive to come up with a range of PVC Coated Fiber Glass Fabric. These fiberglass fabric with polyvinyl chloride (PVC) coated are made from fiberglass base cloth as per international norms. Impregnated or coated one or both sides with compounded PVC, the products we offer have excellent tear resistance strength, fireproof nature, high temperature insulation ozone and good resistance against abrasion, water, oil & cuts. In addition, clients can avail these fabric from us in various thickness starting from 0.13mm to 1.5mm, as per their needs.

Being a customer-focused firm, we strive to come up with a range of PVC Coated Fiber Glass Fabric. These fiberglass fabric with polyvinyl chloride (PVC) coated are made from fiberglass base cloth as per international norms. Impregnated or coated one or both sides with compounded PVC, the products we offer have excellent tear resistance strength, fireproof nature, high temperature insulation ozone and good resistance against abrasion, water, oil & cuts. In addition, clients can avail these fabric from us in various thickness starting from 0.13mm to 1.5mm, as per their needs.

Being a customer-focused firm, we strive to come up with a range of PVC Coated Fiber Glass Fabric. These fiberglass fabric with polyvinyl chloride (PVC) coated are made from fiberglass base cloth as per international norms. Impregnated or coated one or both sides with compounded PVC, the products we offer have excellent tear resistance strength, fireproof nature, high temperature insulation ozone and good resistance against abrasion, water, oil & cuts. In addition, clients can avail these fabric from us in various thickness starting from 0.13mm to 1.5mm, as per their needs.

We are instrumental in offering a quality range of Polyurethane (PU) Coated Fiber Glass Fabric. These products are constructed from a fiberglass base cloth coated one side or both sides with compounded PU. The compounded PU enhance strength, fireproof, good resistance to abrasion & cuts, waterproof, temperature insulation ozone and allergen resistant. Moreover, to meet the clients needs, we offer these products in thicknesses varying from 0.17mm to 1.8mm.

Weight : 1500g/m2

Owing to the profound experience of the market, we have been able to offer a range of PTFE Belt. Made as per industry laid norms, these are widely applauded by the clients for giving best release, chemical resistance and highest dielectric strength. Due to smooth & non-sticky surface, excellent heat transfer and flexibility, our offered products are widely used with sticky or gummy material.

PTFE coated fiber glass open mesh fabric conveyor belts are used for rotory printing and relaxo dryers for non-woven textile, textile printing, silk printing and dyeing, shrink packers and high frequency uv dryers, paper glazing and waxing; food baking, quick frozen machines. The benefits of ptfeglass belts vs. Stainless andor other plastic belts are better heat transfer and absorb less energy, and have non-stick surface and hence easy to clean, costs less to purchase. Its low relative mass allows it to function in a simpler, less expensive pulley and drive systems. Most ideal splices for dryer belts are (1) bullnose joint made of specially woven open weave mesh from kevlar thread. This extremely strong seam is then stitched to the belts ends, resulting in an open weave mesh seam that does not block airflow (2) alligator joint exceptionally strong splice is constructed with metal alligator lacing through which a pin is placed to complete the splice. Harshdeep offers a wide range of edge reinforcements for belts in order to protect the belt edges from wear, abrasion and snagging. The reinforcements strengthen the sides and support guide strips, dots and other guiding & tracking devices.

Available with us is a quality assured range of PTFE Membrane Laminated Filter Bag. Designed to counter the disadvantages of conventional "depth filtration" media, the products we offer act as a media for the built up of a dust cake and captures more & finer particles of the dust. All our products are easy to clean and remove dust cake & then use begin for filtering application. These bags have PTFE membrane laminated on filtration side of filter media for allowing air to pass via the filter media along with trapping all particles on the surface. Further, membrane laminated filter bags are acknowledged as BACT (Best Available Control Technology) by the patrons. These bags do surface filtration by a micro porous PTFE membrane that is laminated for processing a compatible filter media. Support media of these filter bags provides the physical strength to fabric, but the filtration takes place by the membrane. This phenomenon is known as surface filtration.

Supported by a team of deft experts, we have been able to offer a range of PTFE Belt for Garment Fusing Machines. These are made using various type of seam and guiding systems from tightly woven fiber glass cloth as per international norms. The glass cloth used in our offered products comes in varied thickness from 0.25mm and 0.35mm, coated with conductive grade PTFE- black colored. All our products are widely acclaimed for having highest thermal conductivity (best heat transfer) for collar and cuff fusing machines. For meeting the diverse needs of clients, we offer special belts used in shinko summit machines, made with 2 layers of PTFEGlass cloth of thickness 0.30mm in tan and black color and in uniform thickness for smooth running.

With thorough knowledge of variegated industry aspects, we have been able to offer a range of PTFE Fabrics for Packaging Industry. Developed as per international standards, the products we offer are widely utilized in packaging industry as a belts made for continuous sealers and release media for plastic bagpouch sealing. We make PTFEGlass Tape with One-side pressure sensitive Silicone Adhesive which are capable of withstanding temperature range from -150 C to +250 C. When PTFE Glass tape is covered on the heat sealing elements of the sealing machines, these regulates thermal transfer in sealing plasticpolythelene bags. Owing to excellent release properties, high tear resistance strength and ability to withstand extreme temperature, our offered PTFEGlass fabrics are widely demanded in the market.

This product is woven with specific high-twisted yarn and then treated; the heat-resistance temperature of this product can be above 800 C.deg if with special treatment. It is an ideal material to filter aluminum in melting and casting process. Series nettings can be provided, having advanced technology and stable quality. They are widely used for filtration of molten aluminium in foundry of automobile wheel motorcycle wheel cylinder piston as well as aluminium alloy parts. Fiberglass Fabrics have found an interesting application for filtration and uniform distribution of molten aluminium. Oxides are generated when molten aluminium comes in contact with oxygen in air. Chemical reactions occur at high temperatures particularly during melting, be it primary melting, foundry casting or recycling. Oxides must be removed before the metal is cast and this is the stage where fiberglass fabrics and articles made there from are used to give better casting results. The simplest form of application is directly as a cut piece of filter fabric. Evolved shapes stitched from glass fabrics like Combo Bags, Channel Bags, Spout Socks, Funnels, and Launder Socks are also used. These articles help to reduce turbulence, filter oxides as well as improve temperature distribution throughout the ingot. These fabrics are treated with resinous chemicals to stabilize the weave. Molten metal is filtered through this mesh. Number of yarns used will determine the strength of the fabric during filtration. This will also control the amount of flow of liquid aluminium. Smoke free fabrics are also available as a thermal treatment is imparted on the fabric. Customers can order fabrics in any width up to 1500mm. Cut pieces of different sizes and shapes are also available.

Owing to the sound experience of the market, we have been able to offer PTFE Coated Fibreglass Open Mesh Fabric Conveyor Belt. These are offered by us in upto maximum width of 4200mm, having both edges reinforced and with varied types of joints to suit the diverse needs of customers. The products we offer are widely used for rotary printing and relaxo dryers for textile & silk printing, non-woven textile and dyeing. Our offered belts are also utilized in shrink packers, paper glazing & waxing, food baking, high frequency UV dryers and quick frozen machines. All our products considered suitable splices for dryer belts as the bull nose joint of these belts are made of specially woven open weave mesh from Kevlar thread. These strong seams are then stitched to the belts ends for having an open weave mesh seam that does not block airflow. Our offered products have alligator joint strong splice, constructed with S.S. metal alligator lacing via which a pin is placed to accomplish the entire splice. Clients can avail from us a range of edge reinforcements for belts in so as to prevent the belt edges from wear, abrasion and snagging. Further, the reinforcements of our products strengthen the sides and support guide strips, dots & other guiding & tracking devices.

Made available by us is a commendable range of PTFE Fabrics for Food Industry. The products we offer are acclaimed by the patrons for their ability to tolerate high temperature, non-stick surface, non-toxicity, and being odorless & tasteless. These are extensively used as a baking sheet in tray for making confectioneries & chocolates, food drying, processing bakery goods, pre-cooked meats and fish. Having thickness of 0.15mm, and 0.23mm, the products offered by us are widely appreciated by the patrons for being easy to cut and use. The flexible nature of our offered fabric make these easy to take the contour of tray. Further, tray made from our offered fabric is ensured of quality and widely use as a tray for making various biscuits & cakes. All our products are well-known in the market for their non-stick surface, hygienic, corrosion resistant, washability and getting easily passed for contact with food.

We are engaged in offering Adhesive Tapes. These are available in various bases like plastic, paper, fabric and others. Due to its high end features and appealing looks, the entire range finds its application in various packaging purposes and also for domestic packaging and sealing.

This product is woven with specific high-twisted yarn and then treated; the heat-resistance temperature of this product can be above 800 C.deg if with special treatment. It is an ideal material to filter aluminum in melting and casting process. Series nettings can be provided, having advanced technology and stable quality. They are widely used for filtration of molten aluminium in foundry of automobile wheel motorcycle wheel cylinder piston as well as aluminium alloy parts.

We are instrumental in offering a quality range of Polyurethane (PU) Coated Fiber Glass Fabric. These products are constructed from a fiberglass base cloth coated one side or both sides with compounded PU. The compounded PU enhance strength, fireproof, good resistance to abrasion & cuts, waterproof, temperature insulation ozone and allergen resistant. Moreover, to meet the clients needs, we offer these products in thicknesses varying from 0.17mm to 1.8mm.

Pluri Tubular Fabric is widely used in construction of tubular batteries and made from 100% high tensile polyester yarns. These are fabrics having special weave so as to have hollow tubes within the fabric of different diameters. Pluri Tubular Fabric is designed to withstand high pressure of the active material during charge & discharge cycles by using special spun yarns. Such fabrics can also be developed from any other yarn for any special application. The Pluri Tubular Bag is useful for inverter batteries, heavy duty applications such as stationary cells, traction batteries, train lighting etc.

We manufacture an extensive range of PTFE Glass Adhesive Tape raw material for which are sourced from reliable vendors of the industry. Known for high adhesion strength, our range meets the requirements of packaging industry. These tapes are moisture proof. It is dimensionally stable under heat and pressure, and resistance to tears, punctures, abrasion and wear, make PTFEGlass OSA Tapes & Cloth, a very durable & versatile product.

With the aid of our diligent professionals, we have been able to offer a range of Fire Blanket. All our products are made using E-Glass fiberglass fabric as per international quality standards. These life saving blankets quickly smother flames to reduce burn injuries or stop fire from spreading. Can also be treated to gain a better fireproof performance, the products we offer are also used for fire escape due to their ability to withstand high temperature.