hitechcorporation Satellite, Ahmedabad, Gujarat

We are offering machinable products these are 100% solid, high strength, specific metal content machinable system for economical and dependable maintenance and permanent repair works. salient features versatile repair to metal and glass against corrosion. can be machined like metal after curing. no twisting, bending, internal stresses as faced in welding. very economical compared to tig welding of titanium, aluminium etc.

We are offering corrosion resistance. These products are non machinable ceramic filled fibre reinforced, adhere to almost all surface. Specially useful when corrosion and erosion is encountered. salient features versatile to repair any metal in corrosion and acidic area. to get optimum result these can used combined with carbide & microbead compound also.

THESE PRODUCTS ARE NON MACHINABLE CERAMIC FILLED FIBRE REINFORCED, ADHERE TO ALMOST ALL SURFACE. SPECIALLY USEFUL WHEN CORROSION AND EROSION IS ENCOUNTERED.   Salient Features Versatile to repair any metal in corrosion and acidic area. To get optimum result these can used combined with Carbide & Microbead compound also.   Typical Application   Chemical pump casing, impeller, glass lined vessel's, propeller blade of a ship, acid spill over area, where erosion and corrosion is faced encountered due to acid etc. Used in place of rubber lining /Teflon lining to get more life, If erosion is encountered.

Introduction It is a Metallic Filled System which gets cured within 10 minutes after mixing. It is a 100% Solid System which gets cured under high humidity, Even under water and temperature up to 5 Deg. C. It is an excellent, unmatched products for Emergency low cost repair to all under water/Humid condition.   Features & Benefit Fast and Emergency repair that can be reduce the downtime. Fast Mixing & Easy Application. Will Bond to almost all material.   The System can be used Even Underwater/High humidity, Avoids all relevant problems of hot process.   Typical Application Emergency Repair to Elbow, Tank, Cooling Towers, Dam, Pumps, Vessels, Pipes and Many other Emergency application.

Tensile Strength : 550 kg/ cm2

Hi-tech now offers realtech high alumina ceramic lined equipment for highly wear prone application such as coal fired power generation, mining, cement, steel, mineral processing industries. Realtech offers product designed to meet exacting requirement in cost effective manner. The choice of high alumina product ensures excellent wear and corrosion resistant properties. Our engineers are available for customer services for application development including material selection, lining design, fabrication and installation. Alumina shape, size shall be designed to suit the final application of the equipment. The installation of the liner shall be done by high alumina based wear resistant bonding material andor welding.

HI-TECH now offers REALTECH High Alumina Ceramic Lined equipment for highly wear prone application such as Coal Fired Power Generation, Mining, Cement, Steel, Mineral Processing Industries. REALTECH offers product designed to meet exacting requirement in cost effective manner. The choice of High Alumina Product ensures excellent wear and corrosion resistant properties. Our engineers are available for customer services for application development including Material Selection, Lining design, Fabrication and Installation. Alumina shape, size shall be designed to suit the final application of the equipment. The installation of the liner shall be done by high Alumina based wear resistant bonding material and/or welding. The Hardness of REALTECH is next to Diamond which ensures extremely hard and wear resistant material. It can last longer than any other conventional material to take abuse of bulk material handling. In addition it retain its highly wear resistant properties at high temperature. REALTECH is also inert to all most all chemicals and thus providing excellent corrosion resistant properties against chemicals.

We are offering ceramic pulley lagging. It is constructed from hundreds of individual ceramic tiles molded into a durable rubber backing. extends the life of key conveyor components. may allow a reduction in the size of the required drive, take-up, etc. reduces wear from abrasive materials. cost-effectively, prevents belt slippage by increasing the coefficient of friction between the belt and the pulley. creates a self-cleaning action on the pulley surface and prevents the buildup of transported material, water, snow or ice.

HI-TECH now offers REALTECH High Alumina Ceramic Lined equipment for highly wear prone application such as Coal Fired Power Generation, Mining, Cement, Steel, Mineral Processing Industries. REALTECH offers product designed to meet exacting requirement in cost effective manner. The choice of High Alumina Product ensures excellent wear and corrosion resistant properties. Our engineers are available for customer services for application development including Material Selection, Lining design, Fabrication and Installation. Alumina shape, size shall be designed to suit the final application of the equipment. The installation of the liner shall be done by high Alumina based wear resistant bonding material andor welding. The Hardness of REALTECH is next to Diamond which ensures extremely hard and wear resistant material. It can last longer than any other conventional material to take abuse of bulk material handling. In addition it retain its highly wear resistant properties at high temperature. REALTECH is also inert to all most all chemicals and thus providing excellent corrosion resistant properties against chemicals.

Color : White

Ceramic is High value item and it is very brittle under impact To bond ceramic with the steel plate normally one use mortar which has very poor bonding strength with the steel plate and concrete. RealBond Ceramic Bonding Material is Two Part System which gets polymerized and bond nearly any metal, concrete with the ceramic, glass, wood etc with very high strength.  Features & Benefits   Ceramic filled and hence have nearly the same property of parent material.   Superior adhesion to almost all clean surfaces.   Protection against corrosion, abrasion etc.   Gets cured in short time and increases the work output.  

HI-TECH now offers REALTECH High Alumina Ceramic Lined equipment for highly wear prone application such as Coal Fired Power Generation, Mining, Cement, Steel, Mineral Processing Industries. REALTECH offers product designed to meet exacting requirement in cost effective manner. The choice of High Alumina Product ensures excellent wear and corrosion resistant properties. Our engineers are available for customer services for application development including Material Selection, Lining design, Fabrication and Installation. Alumina shape, size shall be designed to suit the final application of the equipment. The installation of the liner shall be done by high Alumina based wear resistant bonding material andor welding. The Hardness of REALTECH is next to Diamond which ensures extremely hard and wear resistant material. It can last longer than any other conventional material to take abuse of bulk material handling. In addition it retain its highly wear resistant properties at high temperature. REALTECH is also inert to all most all chemicals and thus providing excellent corrosion resistant properties against chemicals.

ntroduction Ceramic is High value item and it is very brittle under impact To bond ceramic with the steel plate normally one use mortar which has very poor bonding strength with the steel plate and concrete. RealBond Ceramic Bonding Material is Two Part System which gets polymerized and bond nearly any metal, concrete with the ceramic, glass, wood etc with very high strength. Features & Benefits Ceramic filled and hence have nearly the same property of parent material. Superior adhesion to almost all clean surfaces. Protection against corrosion, abrasion etc. Gets cured in short time and increases the work output.

We are offering abrasion resistant products. Carbide compound ceramic balls silicon carbide filled solid system to combat erosion from particle size of 3 to 6 mm to resist heavy abrasion with corrosion in any equipment in the plant. salient features hard to mix but easy to apply. 100 % solution against abrasion. to get optimum result these can be used combined with poly ceramic compound, liquid & fibreglass tape.

CARBIDE COMPOUND CERAMIC BALLS SILICON CARBIDE FILLED SOLID SYSTEM TO COMBAT EROSION FROM PARTICLE SIZE OF 3 TO 6 MM TO RESIST HEAVY ABRASION WITH CORROSION IN ANY EQUIPMENT IN THE PLANT.   Salient Features Hard to mix but easy to apply. 100 % solution against abrasion.   To get optimum result these can be used combined with Poly Ceramic compound, liquid & Fibreglass tape.   Typical Application   Contoured centrifuge parts where ceramic lining cannot be applied for handling coal, hopper slurry, etc.   For repair of Centrifuges (screw type), I.D. fans, Pneumatic Conveying elbows, slurry pump casing, Hopper, Chute, Inlet side of the ball mill, cyclone separator, ceramic lined bends etc.