Hoist Motors Dealers in Vatva, Ahmedabad

Hoist Brake Motor, which we offer, complies with various industrial standards for quality. We offer these Hoist Brake Motors at economical rates to the customers. Also, these Hoist Brake Motors are manufactured using premium materials. Moreover, these Hoist Brake Motors are easy to install and simpler to maintain. Note : Motors with other voltage & frequency and higher ambient temperatures (> 400 C) and suited for wider power supply variations can also be given. Construction : A Brake Motor is an integral combination of an A.C. induction motor and a disc type, fail safe, electromagnetic brake unit. These motors are foot, flange or face mounted or combination of any two. Dimensions are of squirrel cage types are as per IS: 1231 (for foot mounting), IS: 2223 (for flange mounting), IS: 2253 (For Face Mounting) and enclosure is either totally enclosed fan cooled (TEFC) or Totally enclosed surface cool (TESC) with degree of protection IP54, IP55 as per IS: 4691. It consists of the following A.C. High Starting Torque Sq. Cage Induction MotorA.C. or D.C. fail safe brake mounted on the non-driving end shield Operation : Under no power condition Brake springs keep the Brake liner which is made out of cork material, pressed against stationery disc of the Brake. This brake liners are mounted on a disc engaged with a square block or a geared pinion, mounted on the shaft, thereby prevents rotor shaft rotation. When power is switched on, the brake coil gets energized. It instantly attracts armature disc by overcoming the spring force. This action results in releasing of the brake allowing the rotor to rotate freely. Special Features Being simple and rugged-in construction, these motors need very little maintenance. In the rare event of failure, repair is simple and easy.No separate supply is necessary for brake coil energisation; because the brake coil/s is/are working on A.C. or on D.C. and their supply leads are directly connected to the motor terminals. In case of D.C. Fail safe brake armature coil is energized through rectifier unit which converts A.C. supply in to require D.C. supply.Special brake liner is used, which ensures that, the braking torque Value remains quite stable throughout the use. Compensation for liner wear is easily done by increasing the spring tension and adjusting the air gap. The design of brake motor facilitates a very easy replacement of armature disc and brake liner assembly.For crane and hoist duty applications Brake Motors are offered with special rotors. These rotors are especially suited for S3 and S4 duty normally encountered in hoist and crane applications. Inquiry Details When placing an enquiry kindly furnish the following information: Application detailsMotor Output and speedDuty Cycle (CDF) with number of starts/stops per hour.Ambient temperature and special environmental factors likely to affect the motor, if anyMethod of MountingLoad GD2 referred to motor shaft.Braking torque required.Maximum permissible stopping timeAny other special features required Applications Textile MachineryMachine ToolsPrinting MachinesCranes and hoistsMaterial Handling EquipmentLeather Processing MachinesCable Reeling DrumsLifts & Rolling MillsPaper IndustrySluices & Valve Operation

• High strength: Compactness
• Rugged construction: Excellent workability
• Compact & Light Weight: noise and vibration free

We offer crane & hoist duty motor. concept ideal for frequent starts / stops & reversing operation those motor are high torque. range - 0.10 h.p. To 75 h.p. (0.075 k.w. To 55 k.w.) frame 63 to 250m in 2, 4, 6, 8, 10 & 12 pole on customer request we are also able supply motor in 220, 380, 460, 525 volts on hz. 50 or 60 also mounting - foot - flange - face duty motor is suitable for: - short time duty (s2) intermittent periodic duty (s3) intermittent duty with starting (s4) intermittent duty with starting & ele. Braking (s5) voltage and frequency supply volts 415 +- 5% 3 phase 50 hz. +- 3% (on customer request we are also able supply motor in 220, 380, 460, 525 volts on hz. 50 or 60 also) enclosures motor ip-44 protection as defined in is: 4691. Motors can be supplied with ip-54 and ip-55 on request. winding & insulation motor supply with class “f” insulation as standard feature. Also supply h on request of customer. Motor torque is higher than stander motor. Motor winding design making a high torque of pick up lord smoothly. all motor are operation with d.o.l. Starter. rotor shaft rotor is positive locking with shaft key joint so that cannot move on high full lord torque. Shafts are made by en-8 or en-9 material in sp. Case we can made shaft with en-24 material. application crane & hoist duty motor for operation in material handling lifts cranes, hoists winch & rolling mills.

We are offering crane duty motor, hoist duty motor. Crane & hoist duty motor are used in material handling s1 to s7 duty with option of brake, dual speed, multi speed

hoist duty motors, AC Electric Motors, Brake Motors, Fhp Geared Motors

Ambient - 45° CNon Standard Voltage : 250 - 550VMounting - B3/B5/B35/V1 (B14 up to 132) Duty - S2/S3/S4/S5Offered in two Series DOL & Converter Fed

We are well known for supplying of wide variety of Hoist Duty Motors.

Crane Hoist Duty Motors, face mounted motors

Crane & Hoist Duty Motors, Brake Motors, crane components

hoist duty motor, Shoe Brake Coil, Crane Hoist