Honeywell Flow Switches Dealers in Ahmedabad

• Model: Wfs - 6000
• Country of Origin: Made in India
• Flow Rate: 110 Lpm
• Operating Pressure: 10 kgf/cm2

• Power: 15 Amp 250 V
• Usage/Application: Water Flow Switch
• Contact Point Life: 1000 K Cycle
• Operating Pressure: 10kgf/cm2 (1000KPa)
• Pressure: 150 PSI
• Withstand Pressure: 17.5Kgf/cm2 (91750KPa)
• Bellows Life: 500 K Cycle
• Withstand Voltage: AC1500V/1minute
• Brand: Honeywell
• Temperature Of Fluid: Max 100 Degree C (212 Degree F)
• Insulation Resistance: Over 100 ohm , DC500VM
• Color: Red
• Model Name/Number: WFS6000

• Features: Rugged construction, Long life, Optimum quality
• Brand: Honeywell
• Operating Pressure: 10 kgf/cm2 (1000KPa)
• Withstand Pressure: 17.5 Kgf/cm2 (91750KPa)
• Withstand Voltage: AC1500V/1minute
• Contact Point Life: 1000K Cycle
• Model Number: WFS - 6000

• Contact Point Life: 1000K Cycle
• Temperature Of Fluid: Max 100 Degree C (212 Degree F)
• Operating Pressure: 10kgf/cm Square
• Withstand Pressure: 17.5Kgf/cm Square
• Withstand Voltage: AC1500V/1minute
• Bellows Life: 500K Cycle
• Insulation Resistence: Over 100 ohm,DC500VM

The paddle type SPDT WFS series are designed to provide excellent performance where accuracy, reliability, and rugged construction are required used in liquid flow lines carrying water or any fluid neither harmful to brass and prosphor bronze nor classified as a hazardous fluids. They can be wired to close one circuit and open a second circuit when liquid flow either exceeds or drops below the adjusted flow rate.The WFS series are recommended for liquid pressure and temperature as mentioned below and must not be used on lines carrying liquids below 0 ºC. These series may be used on liquids with high salt or chlorine content but is not for use in hazardous atmospheres.They may be also used outdoors but must be protected from weather or splashing water. All series WFS flow switches are designed for use only as operating controls. Where an operating control failure would result in personal injury and/or loss of property, it is the responsibility of user to add safety devices that protect against, or supervisory systems that warn of control failure.

• Flow Rate: 15 to 1125 lpm
• Material: Brass
• Item Code: WFS6000
• Installation Type: In-line Type
• Pipe Diameter: 1 to 6 inch
• Operating Pressure: 10 kg/cm2
• Max Temperature: 100 Deg C
• Connection: 1" NPTM

The paddle flow switch are designed to provide excellent performance where accuracy, reliability, and rugged construction are required used in liquid flow lines carrying water or any fluid neither harmful to brass and phosphor bronze nor classified as a hazardous fluids. They can be wired to close one circuit and open a second circuit when liquid flow either exceeds or drops below the adjusted flow rate. These are recommended for liquid pressure and temperature as mentioned below and must not be used on lines carrying liquids below 0 C degree.

Water Flow Switch, cooling thermostat, HYDRO COLLATOR MOBILE HEATING DEVICE

Water Flow Switch, Solar Power System and Water Flow Switch