Horizontal Pumps Dealers in Vinzol, Ahmedabad

• Type of Installation: Stationary
• Maximum Flow Rate: 600 m³/h
• Minimum Flow Rate: 5 m³/h
• Maximum Head: 70 m
• Minimum Head: 15 m
• Speed of Rotation: 1450 Revolutions/min
• Maximum Discharge-side Pressure: 7 Bar
• Type of Bearing: Ball Bearings
• Drive Frequency: 50 Hz / 60 Hz
• Type of Drive: Electric Motor
• Type of Installation: Long- Coupled
• Type of Coupling: Direct
• Type of Lubrication: Grease Lubrication
• Pump Set Location: Installed
• Impeller Material: Ci / Ss / Bronze
• Shaft Material: SS 410

Features: Vertically split suction. intermediate and discharge casings clamped together by external tie bolt and sealed with gaskets or 'O' ring as required by the design, pumping temperature of the liquid pumped and the construction of the pump Grease lubricated Antifriction Bearings designed to meet the requirements mounted on either side Pump uses soft graphite lubricated asbestos. The shaft is fitted with renewable shaft sleeve in the region of the stuffing box, which protects the shaft from wear due to packing. Special water-jacketed stuffing boxes, and special design of stuffing boxes with mechanical seals are available The discharge nozzle is top vertical. Suction nozzle horizontal located on the right hand side, left hand side or central position when viewed from the driving end Is available. The flanges are round corresponding to international standards The direction of rotation is clockwise as viewed from the driving end Applications and Industries: Irrigation - Sprinkler Installations Pressure Boosting - Multistage story Building - Hydro - Pneumatic Water Works Fire Fighting - Mining wash down Applications Hydraulic press / Circuits transfer & circulation hot & cold water Boiler feed pumps - Condensate pumps  

We are offering v9 horizontal monoset openwell pumps with ss body in three phase-415 volts in 50 hz. We have emerged as the foremost manufacturer, exporter and supplier of v9 horizontal openwell pumpset which is used in irrigation, overhead storage water-tank filling and water-curing construction sites. With the support of our adroit professionals, our provided pumpset is manufactured using the best quality components and cutting edge technology in strict compliance with industry standards. Moreover, our offered pumpset is highly acknowledged for its high performance and superior quality. Features: • corrosion resistance • rugged design • excellent performance specifications: range phase three head in meter 10 to 44 discharge in lpm 120 to 2560 h.p. 3 to 10 stage 1 outlet size 2.5" x 2.5", 2.5" x 2, 3" x 3", 4" x 4"

Varuna Horizontal Openwell Submersible Pumps are manufactured as per IS: 14220. The high-grade cast iron material with unique hydraulic design gives better performance and efficiency. Since these pumps are designed for underwater applications, there is no need of priming and foot valve.   Horizontal Openwell Submersible Pump Salient Features   Compactly designed pump set for easy handling and installation. High-grade cast iron for a better life even in heavy and contaminated water. Front side carbon bearing with Stainless Steel Thrust Plate and Backside SG Iron Plate with Gunmetal Bush for longer life under various conditions. Stamping is done with Electrical Grade Silicon Steel for lower power consumption and higher product life. Advanced Hydraulic Design for highest energy efficiency in the pump set. Pinhole on drain plug allows the motor to be filled with water on its own to maintain the water level inside the motor. Dynamically Balancing Rotating part to ensure minimum noise and vibration-free operation.   Application   Irrigation from open wells, specially where there is a wide fluctuation in water levels Civil and industries Community water supply from open wells Canals and rivers Agriculture

• Application: Chemical Supply
• Weight: 100-150kg
• Warranty: 1year
• Pump RPM: 1400
• Pack Type: Carton Box
• Surface: Polished

Professional approach of meetings various chemical processes. We commit “Technology that saves you money” Triplex Pumps are the result of quality product & services using its full-fledged designing & modern facilities in Ahmedabad. Superior & strict quality control & testing with outstanding pump performance guarantees the products passing through severe processing applications & harshest of chemical substances.   APPLICATION Offers a wide variety of pumping range in industries such as Process Industries for Hydro Cleaning, Hydro Testing, Reverse Osmosis Plants, Spray Dryers, Boiler Feed, Jet Cleaning, Food Processing, Drain & Sewer Cleaning, Chemical Injection & many more applications.     CAPABILITIES Capacity : upto 1000 L/min Pressure : upto 700 kg/cm2 Temperature : upto 300 degree Celsius   ADVANTAGES & FEATURES Extra strong, heavy duty power frames ensures long life A wide variety of valves available to suit different pumping fluids & applications Smooth operations with efficient performance Simple to repair & nominal maintenance cost Spring loaded plunger packing ensures leak free pumping Three piece liquid end block designs avoids any possibility of block cracking

Horizontal monoset pumps, Horizontal Open Well Submersible Pumps

• Material: Cast Iron
• Country of Origin: Made in India
• Power: 50 and 60 Hz
• Voltage: 415 V
• Brand: LUBI
• Head: 160 M
• Model Name/Number: LHC Series
• Max Flow Rate: 20 to 2700 m³/h
• Temperature Range: 0 to +90 Degree C
• Speed: 2900, 1450, 960 rpm
• Features : The pump casing shall be of Cast Iron grade FG 260 as per IS 210 / ISO 1 86 with radial suction and discharge port, bronze casing wear ring, closed type dynamically balanced impeller, steel shaft, The pump shaft sealing shall either be by gland packing or

• Type: Mechanical Seal / Gland Type
• Head: 70 Mtr.
• Flow: 110 m3 / hr.
• Temp: 110 °C
• M.O.C: CI, CI / SS, SS 304, SS 316, SS 316L, Bronze, Alloy 20 etc.
• RPM: 1440 & 2880 RPM

Application Filter Press Feeding, Dyes & Intermediates, Slurry transfer Cake transfer, ETP Plant, Sugar & Food Industries

We manufacturer of the polypropylene horizontal centrifugal pump, are introducing our range under “Vijay” Brand name This polypropylene horizontal centrifugal pump is a technically horizontal single end suction standardized back pull out process pump, specially designed to fulfill the miscellany requirements of the chemical industries. This pump is manufactured using top grade polypropylene copolymer material to convey considerable inertness against chemicals and thereby is also illustrious as a PP pump (polypropylene pump). The entire manufacturing of this PP pump is carried out by means of the moulding process to create a shield of the PP material against water and corrosive chemicals and hence protect all the wet end parts of the pump and impart longer service life to thereof. This polypropylene pump has accredited in assorted industries for delivering no leakage and no failure experience throughout the lifespan, and is apparent confirmation of its ability to outperform even under the harshest conditions. The use of the polypropylene material and moulding construction protects the pump from corrosive chemicals and hence ensure longevity. All the wet end parts are covered through the moulded construction to withstand corrosion and erosion. The impeller is semi-open type hydraulically balanced by back vanes, used in our all pp pumps to suit both clear & polluted fluids. Distance piece of pumps is made from Polypropylene material and hence no corrosion problem and pump leakage problem. The bearing bracket of this Polypropylene pump is made from heavy-duty graded casting coated with anti corrosive paint. Reliable fixing of impeller on the shaft by direct thread The centrifugal design of the pump ensures noise free and vibration free operations. The pump rotating element can be reversed toward the motor without interrupting the suction or deliver pipeline operation, thanks to the back pull out the configuration of the PP pump. The motor stays fixed to base throughout the operation, whereas the pump rotating element can be taken apart into its component without efforts. There is no need of the re-alignment after the reassemble You will find maximum dimensional interchangeability in the design of "VIJAY" Polypropylene Horizontal Centrifugal Pump. "VIJAY" Pumps require minimum spare parts and saves you significant maintenance costs in the long run.  

We are offering horizontal openwell submersible pump. Varuna horizontal monoblock submersible pumps are manufactured as per is: 14220. The high-grade cast iron material with unique hydraulic design gives better performance and efficiency.

We offer horizontal rotary gear pumps. He-preduce multi purpose horizontal rotary gear pumps they have positive displacement with built in relief valve, extra strong casing & cover. Size:12” to 4” bsp screwed capacity: 18 lpm to 900 lpm. At 1440960 rpm.

Monoset Horizontal Openwell Submersible Pump, Fabricated Impeller & Diffuser

Triplex Horizontal Plunger Pump, Rotary Oil Seal