Hot Oil Pumps Dealers in Kathwada, Ahmedabad

Features Single stage, end suction centrifugal pumps Main pump dimensions are compatible with DIN 24256 (ISO 2858) Single Entry, Closed Type impeller is used Radial vanes are used behind the impellers to lower the pressure and to balance the thrust (axial force.) The pump and the motor are connected by means of a flexible coupling on a common base plate. Maintenance of the pump is very easy. The shaft and other rotating parts can be removed without dismantling the suction and the discharge system. Since the pump uses many standard parts, spare parts are readily available. These pump are designed so that there is no need for external cooling. Due to natural convection the pump temperature decreases towards the roller bearing.

• up to 180 m3/hr: up to 80 mtr.
• 32 mm to 80 mm: up to 350° c
• up to 3500 rpm: up to 8 kg/cm2
• With Air: Grey cast iron, CS, Alloy cast steel

In a Centrifugal pump‚ the procedure fluid enters through the suction spout and after that the focal point of direct known as the impeller. As the impeller rotates‚ it turns the fluid sitting in the pits between the vanes outward. Application Petrochemical industries Oil industries Synthetic-fiber industries Textile, dying, printing industries Plastic & rubber industries Paper making industries Timber making industries Sugar industries Food industries Construction industries Features Horizontal, single stage, single suction volute type, air-cooled centrifugal pumps with closed impeller pump shaft is supported by two heavy duty ball bearings, heat resistant mechanical seal, suction flange is on the front and axial, discharge flange is at top & radial. the below fields the pump are also proper in machinery manufacturing food processing medicine making and the circulation system for oil supplying of the hot oil boiler, the circulation system for the heating installation.

• Pressure: 16 kg/cm2
• Capacity: 10 to 400 m3/hr
• Head: 5 to 100 mtr
• Discharge Size: Dn 32 to 100 mm
• Suction Flange: NB 40 to NB 125
• Temperature: 100 to 350oC
• Speed: 1500 to 3000 rpm

Sujal Engineering has developed most advanced thermal hot oil pump for the for circulating heat transfer thermal oils or hot water under high-temperature conditions. Due to a high temperature of the oil or water this thermal hot oil water cooled pump is primarily used to feed an oil burner or furnace. Our thermal hot oil pumps are most suitable for food processing plants and industrial process applications where hot oil transfer required. Sujal Engineering serves his thermal hot oil pump to chemical and petrochemical industries also. Also provide 24-hour customer services including pump selection, installation, maintenance, repair and parts development. Salient Features: High strength Temperature resistant Single Stage and end suction centrifugal pumps The pump and the motor are connected by means of a flexible coupling on a common base plate Maintenance free The shaft and other rotating parts can be removed without dismantling the suction and the discharge systems Industries Can Use Thermal Hot Oil Pump: Food And Beverages Marine Industry Metal Industry Gas Plant Pulp and Paper Industry Wood Industries Chemical and Petrochemical Industry Material of Construction Cast Steel

Application: To support core markets which are Oil and Gas, Textile, Ghemical, Paper and Sugar, Plastic, Pharmaceutical & Food, Plywood, Rubber, Water, and Industrial Applications. The JEC HTP Series Pump is a horizontal volute casing, single stage centrifugal pump. is manufactured in accordance with Din 24256 (ISO 2858) standard. Designed for thermic fluids and hot water process conditions, Sturdy discharge cover designed for high stiffness, Optimised heat barrier & low wear. Design variant with bearing for high resistance, Reinforced deep-groove ball bearing with special grease fill for long service life,optimised shaft contour ensures reliable removal of leakage, Highly effective venting contour ensures optimum venting, Confined gaskets, Design variant with mechanical seal in tandem arrangement, Anti-seize plain bearing lubricated by the fluid handled, Optimised hydraulic system yields high efficiency, Impeller trimmed to match the specified duty point, Suitable for variable-speed operation and equipped with motor standard, Easy to maintenance for it's back-pull-out design which allows the without needing any type of external air conditioning!

GTFP Petrol-Chemical Industries Oil Industries Textile,dyeing,printing industrie Synthetic - fiber Industries Plastic and rubber Industries Paper marking Industries Timber preocessing Industries Suger Industries Food Industries. Construction Industries. Technical Data:- Capacity :up to 180 m3 /hr Head :up to 80 Mtr Discharge Size :32 mm to 80 mm Temperature :up to 350° C Speed :up to 3500 rpm Cooling Method :With Air M.O.C. :Grey Cast Iron, Cast Steel,Alloy Cast Steel .  

hot oil pump, Oil Burner Pump, bitumen pump

hot oil pumps, Rotary Gear Pump, Pump Shaft