Hot Oil Pumps Dealers in Odhav, Ahmedabad

We are one of the leading Manufacturers, Exporters and Suppliers of Hot Oil Pump from Ahmedabad, Gujarat, India. Fabricated in compliance with the set international standards, our Hot Oil Pumps are corrosion resistant, easy to operate and have longer service life. Hence, they are widely used in petro-chemical industries, sugar industries and many others. Buyers across different countries of the world are free to place medium as well as bulk orders, we promise timely delivery.Operating Range : Pressure : up to 15 bar Head : up to 150 m Speed : up to 2900 rpm Pump Size : 25 to 100 mm Capacity : up to 300 m3 / hr Temperature : 70 to 350° C Type : Centrifugal Hot Oil Pump      Features :     Low maintenance Longer service life Easy to operate Applications : Plastic and rubber industries     Sugar Industries Petro-Chemical Industries Food Industries     Timber processing industries Textile, dyeing, printing industries     Paper making industries     Sysnthetic - fibre industries Oil Industries     Construction industries

GTFP Petrol-Chemical Industries Oil Industries Textile,dyeing,printing industrie Synthetic - fiber Industries Plastic and rubber Industries Paper marking Industries Timber preocessing Industries Suger Industries Food Industries. Construction Industries. Technical Data:- Capacity :up to 180 m3 /hr Head :up to 80 Mtr Discharge Size :32 mm to 80 mm Temperature :up to 350° C Speed :up to 3500 rpm Cooling Method :With Air M.O.C. :Grey Cast Iron, Cast Steel,Alloy Cast Steel .  

Application: To support core markets which are Oil and Gas, Textile, Ghemical, Paper and Sugar, Plastic, Pharmaceutical & Food, Plywood, Rubber, Water, and Industrial Applications. The JEC HTP Series Pump is a horizontal volute casing, single stage centrifugal pump. is manufactured in accordance with Din 24256 (ISO 2858) standard. Designed for thermic fluids and hot water process conditions, Sturdy discharge cover designed for high stiffness, Optimised heat barrier & low wear. Design variant with bearing for high resistance, Reinforced deep-groove ball bearing with special grease fill for long service life,optimised shaft contour ensures reliable removal of leakage, Highly effective venting contour ensures optimum venting, Confined gaskets, Design variant with mechanical seal in tandem arrangement, Anti-seize plain bearing lubricated by the fluid handled, Optimised hydraulic system yields high efficiency, Impeller trimmed to match the specified duty point, Suitable for variable-speed operation and equipped with motor standard, Easy to maintenance for it's back-pull-out design which allows the without needing any type of external air conditioning!

• Capacity: up to 180 m3/hr

The variety of Centrifugal Hot Oil Pumps arrangement planned and produced at Rotech Pumps and Systems work productively for high temperature benefit. The Centrifugal Air Cooled Hot Oil Pumps design is a Horizontal‚ single suction volute type‚ single stage available with a shaft seal or magnetically-coupled pump without a shaft seal. In a Centrifugal pump‚ the procedure fluid enters through the suction spout and after that the focal point of direct known as the impeller. As the impeller rotates‚ it turns the fluid sitting in the pits between the vanes outward.

• Pressure: 16 kg/cm2
• Capacity: 10 to 400 m3/hr
• Head: 5 to 100 mtr
• Discharge Size: Dn 32 to 100 mm
• Suction Flange: NB 40 to NB 125
• Temperature: 100 to 350oC
• Speed: 1500 to 3000 rpm

• Power: >10 HP
• Features: Low maintenance , Discharge flange is at top and radial , Heat resistant mechanical seal
• Item Code: 84137095
• Max Flow Capacity: 51-100 m3/hr
• Max Flow Rate: 50 M3/HR
• Head: 15 meter
• Material: Mild Steel

Features Single stage, end suction centrifugal pumps Main pump dimensions are compatible with DIN 24256 (ISO 2858) Single Entry, Closed Type impeller is used Radial vanes are used behind the impellers to lower the pressure and to balance the thrust (axial force.) The pump and the motor are connected by means of a flexible coupling on a common base plate. Maintenance of the pump is very easy. The shaft and other rotating parts can be removed without dismantling the suction and the discharge system. Since the pump uses many standard parts, spare parts are readily available. These pump are designed so that there is no need for external cooling. Due to natural convection the pump temperature decreases towards the roller bearing.

Thermic Fluid Hot Oil Pump Genral       "SHUKAN PUMPS" Range SPP And EY Series Thermic Fluid Hot Oil Pump is a Horizonatal Single Stage Centrifugal Pump.Foot Mounted and top Centerline Delivery Branch. The Complete Pump Rotating Element Can be withdrawn towards the motor end without disturbing the suction or delivery pipelines,due to'BACK PULL OUT DESIGN.' The motor remains fixed to base plate.the pump raotating elements can easily be dismantled into its components after reassembly no time consuming re-alignments is necessary. 'Pump Impiller' closed Or Semi-Open Radial Impiller Specially Designed For Low NPSH Requirments. Hydralically Balanced by Back vanes, or in the case of large impeller diameters by balancing holes and wear ring on both sides.Reliable fixing of impeller on the shaft by impeller nut and positive locking of impeller nut by means of threaded insert.   Thermic Fluid Hot Oil Pump Applications       Hot and cold water circulation, cooling water circulation Drip irrigation, water supply and building services Fertilizer Plants Dyes & Intermediates,Industrial Water supply Bulk Drugs And Pharmaceutical Effluent Treatment Plants Heating And Air Conditioning Plants Cooling Towers Sugar Plant Fire Fighting Water Supply Volatile Liquids Pulp And Paper , Textile Power , Steel Cement, Agriculture Fiber Jet Dyeing Thermic Fluid Hot Water etc... Oil Extraction And Waste Oil Refineries   Thermic Fluid Hot Oil Pump Operating Range         Speed - N - 960/1450/2900rpm at 50 Hz & 1150/1750/3500 rpm at 60Hz Capacity - Disharge- Up To 700 M3/Hr. HEAD - Up To 150 Mtr. Pump Sizes - DN- 25 mm to 300 mm. Temperature Up To 400° C         Thermic Fluid Hot Oil Pump Material of Construction           Graded Grey Cast Iron Carbon Steel ( WCB) Alloy Steel CF8M & CF8(SS-316,304)   SG IRON AND CAST STEEL CF3 CF3M(SS-316L) Alloy 20.etc.,           Thermic Fluid Hot Oil Pump Optional Accessories       M.S. Fabricated Base Frame/Flexible Coupling/Coupling Guard/Foundation Bolt.

hot oil pumps, Rotary Gear Pump, Air Cooled Heat Pump, Pump Shaft

hot oil pump, Oil Burner Pump, bitumen pump

Hot Oil Circulating Pump, solvent pump, Hot Water Circulating Pump