Hydraulic Machine Dealers in Parimal Garden, Ahmedabad

The Genesis Series Hydraulic Compression Press, Model G50H-19 ASTM is specially designed to vulcanize rubber sheets to provide samples for quality control, research and development and material comparison to prepare sheets for material property testing in accordance with ASTM D3182. Bump, breathe, degas Temperatures up to 500°F Features of the Rubber ASTM Presses: Specially designed platens for improved temperature uniformity (only on 2.5) 19″ x 19″ platens accept all standard sample mold sizes Adjustable clamp force: 8 to 50 tons Self contained hydraulic unit Allen Bradley PLC with operator interface 1/16 DIN digital temperature controllers Fully guarded clamp area with interlocked operator gate Optional contact gauge for quiet operation Optional low pressure system for operation from 2 to 50 tons Automatic bump

The HYDRAULLIC TUBES are mainly used in High Pressure Hydraulic Lines, Fuel Injection Lines, Brake Lines etc. They are mainly used in Automotive Industry, Hydraulic Power Pack Manufacturing, Machinery Manufacturers, and Textile Machinery Manufacturers Etc.Theses tubes can be manufactured in Straight Lengths in Random Length of 3 Meters to 6 Meters or fixed Length up to 12 Meters.Our Seamless Tubes are manufactured by the Cold Drawn Process (Drawn on Mandrel) to provide the closest dimensional tolerance and smooth Outside and Inside Finish. Further to achieve the desired Mechanical properties the tubes are Heat Treated ( Normalized , Stress Relieved , Annealed , Tempered Etc ) as per the Customer / Grade requirement in Bright Annealing ( lnert Atmosphere ) Furnace . Bright Annealed tubes provide very desirable Ra Finish Values for The Inside Diameter Surface of the tubes. Straightening is done on Multiple Roll Straightening Machines to achieve accuracy up 1mm: 1000mm Straightness. Our stringent Quality checks and Best Packing practices (For Exports Special 4 Layer Packing) ensure that the material delivered to the customer is of the highest quality and reaches the destination in best condition. We manufacture these hydraulic tubes as per various international standards such as : EN 10305 – 1 E 215 EN 10305 – 1 E 235 EN 10305 – 1 E 355 DIN 2391 ST 35 DIN 2391 ST 45 DIN 2391 ST 30 AL

The Kulmec Hydraulic Motor powered Screw Air compressor, designed to be used with Hydraulic powered Equipments or vehicles. Kulmec Hydraulic Screw Air Compressor delivers 46cfm (1.3 m3/min) of air at 100 psi (7 bar). Kuimec Hydraulic Screw Air Compressoer are designed and built with robust frames and easily accessible components. This allows for ease of maintenance and reduced downtime.

Applications To prepare test specimen by moulding in a specially designed sample die Technical Specifications   Operation: Motorized operation of hydraulic press Max. Hydraulic Pressure: Available in various capacities Piston size: As per the selected capacity of the machine Piston Travel: 50 mm Pressure Cut-off: On/Off with Auto Stop Switch Dimensions: 520 x 307 x 405 mm Weight: As per the selected capacity of the machine Power: 230 Volts, 50 Hz, Single Phase, AC Supply Salient features   Leek proof design, Easy to operate Yields better pellet quality, Low maintenance Aesthetic exterior appearance, Powder coated body Motorized mechanism with dedicated gear and drive system Side plate construction integral with hydraulic cylinder Pump is kept on one side for easy operation Press mounted on a broad base for stability Calibrated pressure gauge & high pressure seals Safety mechanisms to prevent excessive ram stroke & excessive pressure Equipped with Emergency Manual stop button to override the auto stop function.

Carbon Steel / Alloy Steel Seamless Hydraulic cylinder tubes Carbon Steel / Alloy Steel Seamless Hydraulic cylinder tubes We manufacture ready-to-hone hydraulic cylinder tubes/pipes with close tolerance on ID, thickness, ovality and straightness. Following parameters are taken care of in hydraulic cylinders : Straightness : 0.75mm in 1000mm Minimum ID variation Ovality is minimum 0.4mm Stock is maintained on ID. Minimum stock can be maintained

More than 50% less power consumption than similar sized hydraulic injection molding machines. With 75% fewer machine components than our standard hydraulic machine your company will experience less downtime due to preventative maintenance or repair. There are no valves to stick or leak, no filters or magnets to clean, and our time tested five point toggle system requires lubing only every one million cycles. High efficiency factor h > 0,9 for servo-motors + mechanical gears. Energy efficient - Cost Savings of 60% to 85% over similar sized hydraulic machines. No idle-time consumption. No cooling water for machine cooling.

• Capacity :: 115
• Hole Diameter: 165 mm.

IBH - 10 BLASTHOLE DRILL CONTAINS : (|) Operator friendly Control(|) Heavy Duty Undercarriage(|) Powerful Rotary Head(|) Operator's Cabin

Hydraulic Press (AIM 915-S1)   The Hydraulic Press is a portable bench model and can be used on a sturdy table top. It is fitted with a load measuring gauge calibrated for 0 - 250 kN and also fitted with a pressure release valve for removing pallets.   Industry Civil Infrastructure Cement/RMC Construction Chemicals Dams & Tunnels Fly Ash Railways Sleepers Real Estate Refractories Roads, Highways & Bridges Tiles Education Architecture Building Technology Civil Department Geotechnical Science Colleges Metal & Material Tiles & Ceramics Special Applications Fly Ash Traffic & Transportation Railways Roads, Highways & Bridges

The "Kaiser" Hydrostatic Pressure Testing Machines are used to find out the resistence to internal pressure of R-PVC,C-PVC,U-PVC, MDPE, HDPE, LLDPE, Pipes, Fittings, Valves etc. as per IS, BS, ASTM and other equivalent standards. The "Kaiser" Pressure Testing Machines are designed keeping versatility in mind to perform with different applications as specified in international Standard. Kaiser's computerized model is suitable for many praecox applications of Gas pipes, Hosepipes and for the organisations with quality & quantity manufacturing base of above products.

ultrasonic sealing machine, Heat Sealing Machine, turbo dryer

• Pressure:: 400 Bar
• Temperature: : with NBR O-ring: -35 to +105 with FKM O-ring: -35 to +200
• Speed:: 5m/s
• Media: : Hydraulic oils (mineral oil-based)

Produced with a combination of special compound PTFE ring and 70 shore NBR O-ring, our BSJ design has a wide application area. Being able to be usded safely at high linear velocity,BSJ type seals can also work in higher temperatures or different liquids by means of changing o-ring used as pressure ring. By the help of its profile design they can be used as header pressure ring in hydaulic systems without having the problem of hydro-dynamic pressure.   Material: Material: Almost all media O-ring: NBR/FKM Color: Green/Brown O-ring: Black/Brown  Advantages: High static and dynamic sealing effect Low friction, high efficiencyStick-slip free starting, no sticking Easy installation  

This is electrically operated version of the manual press. The pumping is done by gearmotor drive. Simply press a button & it will start building pressure & will stop autom- atically at set pressure by means of a pressure switch.Higher capacity press with larger plate size are available for specific applications. Ask for specifications giving details of your requirement.

We are offering powder compacting hydraulic press. we have a used powder compacting hydraulic presses with following specifications : capacity : 250 ton make electro pneumatic upper ram stroke : 350 mm upper ram tonnage : 250 ton upper ram movement monitored by mitu toyo linear scale upper ram movement control by servo valveupper ram movement fast approach and dressing is controlled by plc lower ram stroke : 200 mm withdrawal tonnage : 175 ton prefill 0 to 15 mm die float 0 to 50 mm lower ram movement monitored by mitu toyo linear scale lower ram movement controlled by servo valve feeder stroke 200 mm feeder movement controlled by hydraulic cylinder pressing programs are fed in plc and stored hydraulic power pack rexroth make good working condition.

We are deals in hydraulic lift shaft, The system operates on the elevator valves, submersible motors and screw pumps are manufactured by specialized European companies

• Features: High performance, easy operation, Low maintenance cost

• Maximum pressure range: up to 60kg/cm²

Maintenance and leakage free pressure gauge valve fitted inside machine. All stations with auto-locking quick release outlets, Digital programmable time totalize for time counting in short term and long term stations with buzzer indication for completion of the test and busting during the testing.

We are highly delighted to introduce, our self as a Professionally managed manufacturer and supplier of hydraulic equipment at very affordable prices.

UNISON brand hydraulic pressing machine (Dab Press) is more useful for the pressing of Books, Notebook, Diaries, or other binding products . Working Pressure is 7000kgs Easily handling, running in both Auto & Manual mode, Low maintenance, 400mm Stock, can use minimum no. of books.

We are a trusted Hydraulic Tubes Manufacturer, Supplier and Exporter. The Hydraulic Tubes provided by us are fabricated by using high quality material. The Hydraulic Tubes that we offer can be easily Oiled, Varnished, Pickled, Passivated, Phosphated and even Zinc Coated. The Hydraulic Tubes are designed according to the requirement of our customers. Specialties Of Our Hydraulic Tubes Anti- corrosiveDurableExcellent tensile strengthEasy to fit Specifications ASTM SA 822, DIN 1630, DIN2391, EN : 10305, st35, st37.4/45/52/52.4.