Hydraulic Presses Dealers in Daskroi, Ahmedabad

  Hydraulic H Frame Press Supplier & Manufacturers We offer high quality hydraulic C frame presses that are designed to perform a variety of operations. These are made from high quality of raw material which ensures durability at its user end. Our Hydraulic H-Frame Presses has maximum pressure throughout our complete line of H Frame Presses. Working at a lower pressure means less heat and with higher efficiency and most important of all much less risk of liability issues. Standard features available on most H-Frame Press models: Electric / Hydraulic operation provides smooth, consistent pressing action; Open sides facilitates work on long pieces; Easily changeable flat ram nose allows the user to adapt the press to a specific job; Quality, low speed Baldor motor; Low speed pump offers a quiet, dependable operation; Self-locking table design eliminates lateral movement;   Product Features   Accurate clear pass between Bolster and Table Plate Accurate Stroking movement in Downward and Upward direction. Emergency stop push switch. T-Slot for easy clamping of Die and Punch on both Bolster and Table Plate Four side Hardened Rod for guide Adjustable Pressure Relief/Controlling Valve for HT material. Indication light (Tower Light) with safety alarm sound Safety Decals around the machine, keep operator handy. Technical Features   Machine Capacity: Up to 100 MT/150 MT/200 MT/250 MT/300 MT/500 MT/1200 MT Bending Capacity: Up to 20mm HT Material 600x600mm / 750x750mm / 900x900mm /1200x1200mm /: 1320x1800mm “H” / 1500x2000mm “H” and As per Required Cylinder Stroke: 500mm/600mm/750mm/1000mm/1500MM and As per Required

• Brand Name: AIM
• Power: 5 HP
• Capacity: 15-60 Ton
• Phase: 3 Phase
• Frequency: 50-60Hz
• Voltage: 220-380V
• Speed: 1440 RPM
• Working Fluid: Hydro Enklo 68
• Power Source: Electric

• Range:: 20MT to 600MT |
• Length:: 1250 mm to 7000 mm

NC hydraulic Press brakes are economical and very reliable solution for industry demand. NC hydraulic press brakes are designed to give more accuracy and better productivity. The controller has a facility to program the various jobs with complex bending sequence on screen.The Numeric Control is used for Two Axis Control,1. Ram Axis Y      2. Back Gauge Axis X.The program gives facility to bend different bending degrees; different back gauge positions & different open positions. It has a facility to save different programs and same can be reloaded as & when required. The back gauge consists of Flip-top Fingers, Ball Screw & Linear Bearing along with drive. Product Features It has a facility to program the variegated jobs includes complex bending sequence. This facility helps to perform complicated bending job in a signal setting and repeatable production. Dedicated controller with LCD monochrome screen & numeric keypad. Bend angle & Depth Mode program. 128 Programs x 16 bends per program can be stored. Stroke control and stroke counter on screen. Highly Precise press brake scale for accurate Y- axis positioning. AC Servo drive for back gauge positioning. Hardened ground Balls screwand linear motion bearing for better position accuracy and longer life. Ram tilting to maintain banding accuracy over period.

• Color: Red
• Voltage: 220V, 380V, 440V
• Capacity: 1-10 ton
• Power Source: Electric
• Type of Press: C-Frame Press
• Table Size: Max 400x400

  Energy Mission Hydraulic Press Brakes are highly productive, accurate, and economical. Through advanced design and construction, Energy mission offers quality Hydraulic Press Brakes that provide simplified and easily accessible controls for optimum operator efficiency and output.These press brakes are manufactured to high standards of lifetime durability and precision accuracy.Pair of hydraulic cylinders is synchronized mechanically by a heavy-duty torque tube construction. This facility ensures absolute parallelism between ram and table working surface. Product Features The stable robust welded steel frame made of ultrasonically tested IS 262 plates as per guidelines of IMTMA standards. Fast approach & fast return speeds to save cycle time, slow pressing speed for better stroke control & bending accuracy, ensures high productivity. Repetitive accuracy within ± 0.04 mm. International quality hydraulics components. Specially designed compact. Manifolds gives smooth, silent & jerk less operation. Front operated manual back gauge with micro-adjustment. Accurate & fine ram position control by micro limit switch. Five piece adjustable guides with special wear resistant liners. Hydraulic cylinder with twin type sealing low & high pressure and hard chrome. Plated rod with special type guide for long life without leakage. Centralized lubrication with flow control ensures adequate lubrication at all points. Moving work station with on/off controls, emergency push button &selector for manual, semi-auto &automatic mode for easy operation & safety. Ram tilting to maintain banding accuracy over period.

• Type: Herbal
• Grade: Superior
• Shelf Life: 24 Months
• Packaging Type: Pouch
• Form: Powder
• Packaging Size: 250 gm
• Storage: Cool & Dry Place

We are the leading supplier of this products.

• Voltage: 220V
• Automatic Grade: Automatic
• Power: 1-3kw
• Power Source: Electric
• Material: Iron, Cast Steel
• Capacity: 1-5 Ton, 5-10 Ton, 10-20 Ton
• Hydraulic Pressure: 2600 Psi

• Material: Metal
• Voltage: 220V
• Warranty: 1 Year
• Operating Mode: Semi Automatic
• Machine Structure: Vertical
• Packaging Type: Carton Box
• Usage: Industrial

Hydraulic Press Machines For Camphor Slab Hydraulic Press Machine Small Gantry Automatic Or Manual Operated. Knife Hydraulic Press Four-Column Hydraulic Press Single Column Hydraulic Press Or C - type Press Machine H Type Press Machine Vertical Hydraulic Press Horizontal Hydraulic Press Knife Hydraulic Press High Viscosity Index - Oil Can Be Used Under Wide Operating Temperature Range Superior Demulsibility - Helps To Settle Entrained Water Quickly Good Antirust Property - Protects Lubricating Parts From Rusting In The Presence Of Moisture Good Antiwear Property - Prevents Wear Between Moving Parts Under Heavy Load

• Circulating Pump Power: 0.75 Kw
• Hydraulic Power: 225 Kw
• Heating Medium: Thermic Oil
• Thermic Oil: 400 mm
• Diameter of Ram: 85mm
• Platen Size: 2500 x 1300 x 42 mm+/-0 2 mm
• Capacity: 120 Ton
• Model: NR-113

Silent Features : Heavy duty high quality fabricated steel structure  Leak proof hydraulic cylinder  Hard chrome plated earns  Equal heating in all daylights  Accurate welded and machined for minimum deflection  Heavy duty german power pack  Maintenance free hydraulic systems  Siemence PLC control  Italian Circulating pump 

• Certification: CE Certified
• Weight: 100-1000kg
• Voltage: 110V
• Automatic Grade: Automatic
• Power Source: Hydraulic
• Warranty: 1 Year
• Power: 1-3kw

• Form: Powder
• Style: Dried
• Purity: 100%
• Packaging Size: 10-20 Kg
• Key Ingredients: Hibiscus Flower
• Quantity: 400 GM, 900 GM, 100 GM, 5 KG
• SELF LIFE: 2 YEAR
• Key Benefits: Used to get relief from indigestion and gas, Helps in maintaining general health and vitality, Supports in regulating the digestive system
• Direction For Use: Take Pragna Hibiscus Flowers Powder as directed by the physician
• Safety Information: Read the label carefully before use, Keep out of reach of the children, Store in a cool and dry place, Do not exceed the recommended dose

Our Compression Molding Press is built-to-last long and requires the least maintenance. We are backed by a team of quality controllers who make sure that the offered lot is in complete conformity with the quality standards. Our reliable and superfast shipping facilities will not let you wait much and will efficiently deliver the range to your doorstep.

• Color: Grey
• Voltage: 440V
• Condition: New

Neoplast make hydraulic presses are designed to meet the diverse need of industry. NEOPLAST hydraulic press are used in many applications including R & D, Q.C. of PVCEngineeringRubber Compound, and Color matching etc. used for low volume production situations and quality testing in biological and mechanical fields wherever compressing is required.

• Application: HDPE / PP Woven Sack Bags, Jumbo Bags, Tarpaulin, Fabric, Embroidery Fabric, Jute Bag, Cement Bag, Green Net, Raffia Bag etc.
• Features: Bale Press From 12 tons - 120 tons, Easy to maintain, Economical & Heavy in Structure, Strict Qualit

• Color: Black
• Voltage: 220V
• Automatic Grade: Automatic
• Driven Type: Electric
• Warranty: 1year
• Power: 5 Hp.
• Capacity: 100ton.
• Hydraulic Cylinder: 04 Nos, Bor-125mm.
• Opening Height: 1000mm
• Closing: 0mm.

• Usage: Industrial
• Max Force or Load: 20 Ton
• Capacity: 300 Per hour
• Material: Mild Steel
• Automatic Grade: Automatic
• Phase: Single Phase
• Control Type: CNC
• Surface Treatment: Color Coated
• Brand: Pacific

Overview Scrap balers are used for reducing the scrap materials in two dimensions by using hydraulic force from two different angles. The bale density is slightly less than triple compression baler. The balers has one cylinder fixed in horizontal position. Vertical reduction usually take place by hydraulic pressure on the lid cylinder. The horizontal cylinder presses the scrap against the ejection door of the baler. This door can be raised or opened hydraulically after the process of baling is complete. The scrap bundle is then removed from the chamber by horizontal cylinder. * Scrap Feeding Hopper can also be provided on customer's request. Salient Features: Option for Hand Lever operated as well as PLC Controlled Scrap Balers High Speed & fully automatic Balers can be manufactured Equipped with all the safety features CE Marking on the balers can also be arranged on extra cost Lower energy consumption with increased rate of production Requires minimum maintenance Reliable hydraulic system & power pack ensured by the use of imported valves of reputed make Valves are easily interchangeable Lower cost per ton than any other baler Ease of operation Each Baler is rigorously tested prior to the dispatch Third party Inspection can also be arranged. Spare parts are easily available across the globe. Heavy duty construction of the balers. Can be customized as per the specifications of the clients. Single compact unit mounted over I –Beam (girders) Hydraulic Accessories are provided to avoid accident. No major civil foundation is required. Replaceable wear resistance plate for long life of the baling chamber. Shearing blades on the edges of the chamber and door to shear excess and oversize scrap.

We are offering hydraulic single action press from us at affordable prices that easily fit in their budgets. The hydraulic single action press manufactured by us is composed of high grade components that raise its demand in the market. Also, we are one of the prominent hydraulic single action press manufacturers in the country. sizes : 20" to 22" availability with : ms bodycontrol valvemotor gear pumppiston pump hydraulic power packstandard direction

Hydraulic Pre-Stressing Machine Hydraulically operated double gun type pre-stressing unit is designed for pre- stressing of steel wires while manufacture of railway pre-stressed concrete slippers. It is operated on 3 phase AC power supply without need for neutral wire. The electric motor driven radial piston pump provides oil flow at high pressure for required stressing force. There are two guns and can be operated simultaneously or individually by simple pressing of push buttons on each gun. When pre-set stressing force is achieved, pilot lamp glows and solenoid valve is stopped automatically. The gun will remain in stressed position until retracted by second push button. The stressing pressure can be set on pressure control valves provided on operator console. The stressing can be read in terms of bar and kN on separated gauges. The values of stressing force are also indicated on digital meter. The whole unit is mounted on wheels and castors for easy movement.

• Material: Mild Steel
• Max Force Or Load: 0-30 ton
• Capacity: 30 ton
• Bail Weight: 150 Kg
• Motor Power: 7.5 HP 1440 RPM
• Platen Size: 36" x 24"
• Automation Grade: Manual

• Brand Name: MECH HEART
• Usage: In Woven Sack Industries
• Platform Size (WIDTH): Width: 800, 1200, 1500 mm
• Platform Size (DEPTH): Depth: 600, 800, 1000 mm
• Tonnage: From 10 Ton to 80 Ton
• Hydraulic Cylinder: From 10 Ton to 80 Ton
• Structure Made of: Heavy Duty Plates, Channels, Angles, Box Pipes
• Pump Type: Hydraulic Vane Pump (Double)
• Hydraulic Products: Made of Polyhydron
• Direction Control Valve: Yuken / Rexroth
• Guide Rod: Hardchrome Solid Rod, 4 Nos.
• Pump Capacity: From 27 LPM to 250 LPM
• Power Supply: 3 Phase
• Motor Capacity: From 5 Hp to 20 Hp
• Motor Mounting: Vertical, Flange Mount 1440 RPM

• Color: Black, Blue, Gray, Brown, Red, Pink
• Voltage: 220V, 380V
• Condition: New, Used
• Operating Mode: Manual, Semi Automatic
• Warranty: 1year, 2years, 5years
• Usage: Industrial
• Driven Type: Hydraulic

Most widely-user friendly filter press Opening & closing is done hydraulic cylinder & power pack assembly Hydraulic cylinder is designed for thefilter press locking instead of ratchet pinion locking Two types of Hydraulic locking system available Hydraulic cylinder with mechanical lock not pull back type hydraulic cylinder operated by control panel Hydraulic cylinder capacity : 30 to 300 mt,stroke : 150 to 2500mm.

• Application: Jute Sack Pressing
• Material: Mild Steel
• Phase: Three Phase
• Max Force Or Load: 0-30 ton
• Bail Size: 36x27x26 Inches (LxWxH)
• Automation Grade: Semi Automatic 

100 tons to 200 tons hydraulic bale press. For jumbo bag fibc bag in different platform sizes. And different pressure

These presses are most suitable for very compact baling of HDPE, PP-Woven Sacks Bags. Compact bales of bags made to facilitate save transportation cost, time & storage space.The moving Platens can be stopped by means of height adjustable limit switches on both sides, i.e. upwards & downwards.

Tablet Press-TabXpress-IV High Speed Double Sided with Pre-Compression Tablet Press- GMP Model Application & Process : Prism TabXpress-IV is a High Speed Double Sided Rotary Tablet Compression Press suitable for millennium batch size production. TabXpress-IV designed in an effort to exceed the highest cGMP requirement and to ensure the most economical and efficient tablet production. The TabXpress -IV features a unique ergonomic design for EASY to Operate, EASY to Fast Changeover, EASY to Clean with minimum down time. The TabXpress is completely separated into three zones i.e. Tablet Compression zone, Machine service zone and Electrical controls zone. The Optional feature of TabXpress-IV machine can provide with Touch Screen Operate Interface with PLC Controls, which is mounted in a separate electric controls cabinet. The TabXpress-IV Tablet Press is offered in four different models viz. Tooling 45 Stn "D" Type, 55 Stn "B" Type, 69 Stn "BB" Type, 75 Stn "BB" Type. The Machine Ergonomics Design Concept : The TabXpress-IV has been completely new designed according to the most modern ergonomic aspects. cGMP confirm. Machine's basic construction with separate compression zone and drive zone and electric controls zone. Fast Cleaning and Changeover capability. Stainless Steel and Acrylic Glass Surrounding. Easy to Operate and Maintenance. Salient Features : Design Conforming to cGMP standards. Contact parts SS 316 and non contact parts SS 304. TabXpress-IV is high speed double sided tablet press with internal gear drive, pre compression and suitable for medium size batch production and offered in three model "D" , "B" & "BB" Tooling Simple and Convenient Operation, Changeover, Cleanliness, Operator Protection and Easy to Maintenance. Pre-Compression System to improve tablet quality All Controls like tablet thickness, weight adjustment, Pre-press adjustment are in front of the machine and outside the compression zone Turret Drive from Closed Gearbox through Internal Helical Gearing with Continuous Lubrication. Electro Magnetic Clutch Drive for Safety, Ease and Maintains Free operation. A C Frequency drive for Turret Motor and Feeder Motor. Force Feeder for Powder Feeding with Bottom side drive. Fast changeover and Easy cleaning designed with Easy removal Weight adjustment sector. Upper guard with Hydraulic Cylinder and Lower guard From S.S. 304 fitted Limit switch. Turret made from Special graded casting and option for 3pc.turret with S.S.316 Diepot. Hydraulic Power Pack for Pressure Loading & Overloading release. Auto Lubrication System for Turret gearing and fulcrum pins. Paint free Tablet Compression zone. Dust suction nozzle for Controlling Dusting. Closed Dust free Front Electric Control Panel easy Removal type Optional Features : Gravity feeder System. Powder level sensor in hopper. During Start and Stop Rejection and Sampling device Advance PLC controls with Touch Screen interface.. Safety Features : Interlocked upper guard and Overload relay protection. Overload pressure release mechanism. Emergency stop button.