Hydraulic Presses Dealers in Vatva, Ahmedabad

Standard Features Ram structure with platen. Grounded Bolster Platen. Hydraulic Holding plates Cushion structure with hydraulic cushion arrangement is provided on deep drawing presses. Ram platen & Bolster with T-slots or hole tapping. Mechanical Hydraulic Ejector can be provided as an optional feature. Stress relived frames available with Ultrasonic vibration technique as an option. Shock absorber cylinders are provided optionally for blanking sheet. Remote controlled Tonnage adjustment. Remote controlled Cushion Force adjustment. Multiple speeds for Approach, pressing & return strokes saves cycle time. Hydraulic Cylinders made of seamless hone tubes & hard chrome plated rod.

• Voltage: 220-380V
• Power Source: Electric
• Frequency: 50-60Hz
• Material: Mild Steel
• Phase: 3 Phase
• Oil Required: 170 Liter
• Pressure: 180 Kg/cm2
• Minimum Bale Height: 200mm
• Brand: AIM
• Electric Motor: 10.5 HP

• Voltage: 220V, 380V, 440V
• Phase: Single and Three Phase
• Pressure: 160 kg/cm2
• Automatic Grade: Automatic
• Power Source: Mechanical, Electricity
• Surface Finish: Painted

Our Compression Molding Press is built-to-last long and requires the least maintenance. We are backed by a team of quality controllers who make sure that the offered lot is in complete conformity with the quality standards. Our reliable and superfast shipping facilities will not let you wait much and will efficiently deliver the range to your doorstep.

Theses Presses are designed for deep drawing application. These presses are available in various designs like Single Action Deep Drawing, Double Action Deep Drawing or Triple Action Deep Drawing Press. The robust Frame is fabricated from UT tested IS 2062 grade steel plates. Deep drawing presses are available in various designs like Single Action Deep Drawing, Double Action Deep drawing or triple action deep drawing press. The structure design is done with latest 3-D modeling & analysis software to check for proper strength & rigidity. The adjustable guiding arrangements are specially designed to suit the operation requirement for longer life. Standard Features Ram structure with platen. Grounded Bolster Platen. Hydraulic Holding plates / Cushion structure with hydraulic cushion arrangement is provided on deep drawing presses. Ram platen & Bolster with T-slots or hole tapping. Mechanical / Hydraulic Ejector can be provided as an optional feature. Stress relived frames available with Ultrasonic vibration technique as an option. Shock absorber cylinders are provided optionally for blanking sheet. Remote controlled Tonnage adjustment. Remote controlled Cushion Force adjustment. Multiple speeds for Approach, pressing & return strokes saves cycle time. Hydraulic Cylinders made of seamless hone tubes & hard chrome plated rod. Latest technology PTFE seals with bronze guide tapes in hydraulic cylinders ensure long life. Power saving hydraulic system equipped with logic cartridge valves. Smooth & noiseless operation handing higher flow volumes. Compact Manifold blocks eliminating piping joints & ensures leak free hydraulic system. International quality hydraulic & electrical components to ensure long service life. Overload protection safety by hydraulic & electrical interlocks. Two-hand operator safety to ensure accident free operation. Optional infra-red safety curtain interface on front & rear side of machine to ensure safe working on machine. Optional Servo-power pack.

• Certification: CE Certified
• Weight: 100-1000kg
• Voltage: 110V
• Automatic Grade: Automatic
• Power Source: Hydraulic
• Warranty: 1 Year
• Power: 1-3kw

• Circulating Pump Power: 0.75 Kw
• Hydraulic Power: 225 Kw
• Heating Medium: Thermic Oil
• Thermic Oil: 400 mm
• Diameter of Ram: 85mm
• Platen Size: 2500 x 1300 x 42 mm+/-0 2 mm
• Capacity: 120 Ton
• Model: NR-113

Silent Features : Heavy duty high quality fabricated steel structure  Leak proof hydraulic cylinder  Hard chrome plated earns  Equal heating in all daylights  Accurate welded and machined for minimum deflection  Heavy duty german power pack  Maintenance free hydraulic systems  Siemence PLC control  Italian Circulating pump 

• Material: Metal
• Voltage: 220V
• Warranty: 1 Year
• Operating Mode: Semi Automatic
• Machine Structure: Vertical
• Packaging Type: Carton Box
• Usage: Industrial

Hydraulic Press Machines For Camphor Slab Hydraulic Press Machine Small Gantry Automatic Or Manual Operated. Knife Hydraulic Press Four-Column Hydraulic Press Single Column Hydraulic Press Or C - type Press Machine H Type Press Machine Vertical Hydraulic Press Horizontal Hydraulic Press Knife Hydraulic Press High Viscosity Index - Oil Can Be Used Under Wide Operating Temperature Range Superior Demulsibility - Helps To Settle Entrained Water Quickly Good Antirust Property - Protects Lubricating Parts From Rusting In The Presence Of Moisture Good Antiwear Property - Prevents Wear Between Moving Parts Under Heavy Load

• Color: Grey
• Voltage: 440V
• Condition: New

Neoplast make hydraulic presses are designed to meet the diverse need of industry. NEOPLAST hydraulic press are used in many applications including R & D, Q.C. of PVCEngineeringRubber Compound, and Color matching etc. used for low volume production situations and quality testing in biological and mechanical fields wherever compressing is required.

• Usage: Industrial
• Max Force or Load: 20 Ton
• Capacity: 300 Per hour
• Material: Mild Steel
• Automatic Grade: Automatic
• Phase: Single Phase
• Control Type: CNC
• Surface Treatment: Color Coated
• Brand: Pacific

• Color: Black
• Voltage: 220V
• Automatic Grade: Automatic
• Driven Type: Electric
• Warranty: 1year
• Power: 5 Hp.
• Capacity: 100ton.
• Hydraulic Cylinder: 04 Nos, Bor-125mm.
• Opening Height: 1000mm
• Closing: 0mm.

• Application: HDPE / PP Woven Sack Bags, Jumbo Bags, Tarpaulin, Fabric, Embroidery Fabric, Jute Bag, Cement Bag, Green Net, Raffia Bag etc.
• Features: Bale Press From 12 tons - 120 tons, Easy to maintain, Economical & Heavy in Structure, Strict Qualit

• Voltage: 220V
• Automatic Grade: Automatic
• Power: 1-3kw
• Power Source: Electric
• Material: Iron, Cast Steel
• Capacity: 1-5 Ton, 5-10 Ton, 10-20 Ton
• Hydraulic Pressure: 2600 Psi

100 tons to 200 tons hydraulic bale press. For jumbo bag fibc bag in different platform sizes. And different pressure

• Production Capacity: 120 Ton
• Bale size(L X W X B): 1100 mm X 700 mm X 500 mm (44 X 28 X 20)
• Electric Motor: 20 H.P/ 3 phase
• Speed: 1440 RPM
• Hydraulic pressure: 3000 PSI
• Over all dimension: 1600 mm X 1000 mm X 3450 mm

This Vertical Pet Bottle Baler is designed for long stroke pressing. It is a must-have piece of equipment for any plastic or can recycling operation, and is ideal for crushing hollow products such as PET bottles and aluminum cans into tight, compact bales for easy handling, storage, and transporttion. Specifications: Volume reduction ratio : 25:1 Can produce up to 400 Kgs. bales Applications: PET bottles Disposable plastic tableware HDPE/PP jars Pop / soda cans Features: Long Ram : Ensures full compaction of every hollow article in the bale. This is especially important with aluminum cans and similar. Liquid Drainage Tray : For collecting and draining out the residual liquid in the containers. This is a must-have for any baling of containers that contained liquids. Auto Chain Bale Ejector : For automatically ejecting bales out of the chamber through the lifting force of the chain. Fixed Retainer Claws : Prevents the compacted material from rebounding

• Brand Name: MECH HEART
• Usage: In Woven Sack Industries
• Platform Size (WIDTH): Width: 800, 1200, 1500 mm
• Platform Size (DEPTH): Depth: 600, 800, 1000 mm
• Tonnage: From 10 Ton to 80 Ton
• Hydraulic Cylinder: From 10 Ton to 80 Ton
• Structure Made of: Heavy Duty Plates, Channels, Angles, Box Pipes
• Pump Type: Hydraulic Vane Pump (Double)
• Hydraulic Products: Made of Polyhydron
• Direction Control Valve: Yuken / Rexroth
• Guide Rod: Hardchrome Solid Rod, 4 Nos.
• Pump Capacity: From 27 LPM to 250 LPM
• Power Supply: 3 Phase
• Motor Capacity: From 5 Hp to 20 Hp
• Motor Mounting: Vertical, Flange Mount 1440 RPM

Hydraulic Press Brake Machinery Perfect synchronization due to two hydraulic cylinders on rear side attached to two levers which are interconnected by pipe. Self aligning floating table to absorb elastic deformation of table which protect side frames from deformation. This feature enhances life of pin and bushes. Manifold Block design of hydraulic circuit to make the system compact and reduce pressure drops. Manual Auto operation selection in panel Proximity switches in place of limit switches avoiding maintenance.

• Color: Black, Blue, Gray, Brown, Red, Pink
• Voltage: 220V, 380V
• Condition: New, Used
• Operating Mode: Manual, Semi Automatic
• Warranty: 1year, 2years, 5years
• Usage: Industrial
• Driven Type: Hydraulic

The Hydraulic Bale Press that is available with us is fabricated using high grade MS and also has an AC motor for speedy and smooth operations. The Hydraulic Bale Press that we manufacture is also exported throughout the globe. Machine Sizes : 12"x12"16“ x16"20" x 20" 24" x 36"

• Number of Rollers: 3
• Brand Name: MAX WOOD
• Material: MS
• Model Name/Number: MHP 2503
• Capacity: 220 Ton
• Usage/Application: Industrial Use
• Platen Size: 2500 x 1300 x 42 mm
• Thermic Oil Motor: 1 HP
• Hydraulic Motor Power: 7.5 HP
• Power Rating: 23 kW
• Ram Diameter: 90 mm
• No. Of Layers: 1
• Max. Opening Of Press: 390 mm
• Heating Medium: Thermic Oil
• No. Of Cylinder: 6

4 -Tie-Bar Construction. Upward Clamp Stroke. Use of High Tensile Hard Chrome Tie Rods. Accurate Alignment. Reduced wear. Moving Bolsters are machined steel, ground flat and parallel. Presses Platens are from thick solid plates to minimize deflection. Perfect Parallelism and Stability. Hydraulic unit, consisting of a steel constructed reservoir, pump, motor. Features are built-in such as slow decompression, to eliminate hydraulic shock and extend operating longevity. Ram pre-fill system is with two side cylinders for fast closing speeds.

• Usage: Industrial

We are offering hydraulic press break machine. The composition of hydraulic press brake machine comprises of ms fabricate body, ac motor as well as auto control panel.

We have emerged as the leading manufacturer and supplier of highly reliable Hydraulic Filter Press Machine. The offered press machine is manufactured using top notch quality components and latest technology under the supervision of quality controllers on well-defined quality parameters. This press machine is highly demanded by our customers all over the nation due its low maintenance. In addition to this, clients can avail this press machine at very competitive prices.Features:1. Low maintenance2. Optimum performance3. Robust design

Most widely-user friendly filter press Opening & closing is done hydraulic cylinder & power pack assembly Hydraulic cylinder is designed for thefilter press locking instead of ratchet pinion locking Two types of Hydraulic locking system available Hydraulic cylinder with mechanical lock not pull back type hydraulic cylinder operated by control panel Hydraulic cylinder capacity : 30 to 300 mt,stroke : 150 to 2500mm.

Tablet Press-TabXpress-IV High Speed Double Sided with Pre-Compression Tablet Press- GMP Model Application & Process : Prism TabXpress-IV is a High Speed Double Sided Rotary Tablet Compression Press suitable for millennium batch size production. TabXpress-IV designed in an effort to exceed the highest cGMP requirement and to ensure the most economical and efficient tablet production. The TabXpress -IV features a unique ergonomic design for EASY to Operate, EASY to Fast Changeover, EASY to Clean with minimum down time. The TabXpress is completely separated into three zones i.e. Tablet Compression zone, Machine service zone and Electrical controls zone. The Optional feature of TabXpress-IV machine can provide with Touch Screen Operate Interface with PLC Controls, which is mounted in a separate electric controls cabinet. The TabXpress-IV Tablet Press is offered in four different models viz. Tooling 45 Stn "D" Type, 55 Stn "B" Type, 69 Stn "BB" Type, 75 Stn "BB" Type. The Machine Ergonomics Design Concept : The TabXpress-IV has been completely new designed according to the most modern ergonomic aspects. cGMP confirm. Machine's basic construction with separate compression zone and drive zone and electric controls zone. Fast Cleaning and Changeover capability. Stainless Steel and Acrylic Glass Surrounding. Easy to Operate and Maintenance. Salient Features : Design Conforming to cGMP standards. Contact parts SS 316 and non contact parts SS 304. TabXpress-IV is high speed double sided tablet press with internal gear drive, pre compression and suitable for medium size batch production and offered in three model "D" , "B" & "BB" Tooling Simple and Convenient Operation, Changeover, Cleanliness, Operator Protection and Easy to Maintenance. Pre-Compression System to improve tablet quality All Controls like tablet thickness, weight adjustment, Pre-press adjustment are in front of the machine and outside the compression zone Turret Drive from Closed Gearbox through Internal Helical Gearing with Continuous Lubrication. Electro Magnetic Clutch Drive for Safety, Ease and Maintains Free operation. A C Frequency drive for Turret Motor and Feeder Motor. Force Feeder for Powder Feeding with Bottom side drive. Fast changeover and Easy cleaning designed with Easy removal Weight adjustment sector. Upper guard with Hydraulic Cylinder and Lower guard From S.S. 304 fitted Limit switch. Turret made from Special graded casting and option for 3pc.turret with S.S.316 Diepot. Hydraulic Power Pack for Pressure Loading & Overloading release. Auto Lubrication System for Turret gearing and fulcrum pins. Paint free Tablet Compression zone. Dust suction nozzle for Controlling Dusting. Closed Dust free Front Electric Control Panel easy Removal type Optional Features : Gravity feeder System. Powder level sensor in hopper. During Start and Stop Rejection and Sampling device Advance PLC controls with Touch Screen interface.. Safety Features : Interlocked upper guard and Overload relay protection. Overload pressure release mechanism. Emergency stop button.

• Press Capacity: 20 T / 40 T / 60 T / 100 T
• System Status: Digital
• Temperature Controller: Micro processor based double display digital PID controller
• Temperature Range: Ambient to 200°C
• Timer: Micro processor based double display digital timer with Hooter
• Timer Range / Resolution: Up to 999.59 min. / 1 sec.
• Insulation: Heat insulator in form of Teflon sheet inserted between heating & cooling plates
• Ram Movement: Down acting
• Distance Between Tie Bars: Distance between tie bars is 260mm
• Motor: 1.5kW
• Ram Closing Speed: 3.5mm/sec.
• Ram Opening Speed: 5mm/sec.
• Max. Daylight: 250mm or optional
• Min. Daylight: 50mm
• Max. Stroke Size: 200mm or optional
• Power Supply: 440V AC, Three phase, 50Hz

'c' frame and column type hydraulic presses are designed and supplied as per our standards as well as customers specifications. These process are finding applications in general fabrication industry for bendingstraightening plates, sections etc. For cutting , embossing & drawing in sheet metal components in automobile, kitchen ware, electronics etc.