IBR Valves Dealers in Ahmedabad

• Shell wall Thickness: ANSI B 16.34
• Manufacturing Standard: BS:1873

IBR valves Flanged ends as per ANSI B 16.5 & 26” and above ANSI B 16.47 Series A & B. With Gear Operation if the Torque Exceeds 350N, With limit Switch Arrangements for open & Close Position.

We are offering safety relief valve - non ibr. safety valves are designed and manufactured to meet the requirement of all a variety of applications as per api 526 and api 520. They also conforms to standard viii and the design requirement of indian boiler regulations, they are of full lift type direct spring loaded, with a top guide, the full nozzle has the eliminating distortion of the seating surface, as body strain is not transmitted the nozzle is made from a corrosion resistance stainless steel material, when closed position, the fluid does not come in contact with the valve body an therefore only subject to the outlet pressure which is very much lower pressure. Design : self actuating, full lift, spring loaded. Discharge : angle bonnet : open or closed pressure rating : 150#, 300#, 600# moc : cast iron, cast steel, ss 304 / 316, ss 304l / 316l, gunmetal etc. size available : ½" x ¾ " to 16" x 18" end connection :screwed, flanged end safety relief valves, safety relief valves widely used for : steam boilers, steam services, compressors, receivers, burners, dryers and other piping systems and many more. Cast carbon steel size : 1”(25mm)to 6”(150mm) max. Bop 250 psig (24.1bar) at 800 f (427 c)

• temprature: up to 300°C
• Size: 1/2" to 4"

We Manufacture Quality Valves of almost all types for a wide spectrum of users in the Process & Chemical,Refineries & Petrochemicals,Fertilizers,Drugs & Pharmaceuticals,Thermal Power Stations, Nuclear & Atomic Power Stations,Textiles,Dyes & Intermediates, Paints & Varnishes, Sugar,Breweries & Distilleries,Soaps & Detergents, Steel Plants,Food & Oil Industry, Solvent Extraction Plants, Sewage, Effluent & Water Treatment, Cooling Water,Ship Yards and Marine Management,Water Works,Pulp & Paper,LPG Bottling Plants, Onshore & Offshore platforms, Slurry & Ash handling.

Body ASTM A216 Gr. WCBC, Seat Ring CARBON STEEL WCB WITH 13 % Cr. S.S. FACING, Hand Wheel Nut CARBON STEEL, Bonnet ASTM A216 Gr. WCBC.I, Back Sheet S.S AISI 410, Cross Bolt & Nut CARBON STEEL.

ibr industrial valves, non ibr industrial valves, boiler mountings, Pipes

ibr valves

ibr valves, Butterfly Valves, API 6D Swing Check Valve, API 6D Gate Valve