Impact Testers Dealers in Ahmedabad

The Ball Point Impact Tester, provided by us, is built-to-last long and requires the least maintenance. We are working with a team of deft professionals who manage the entire task proficiently and lay special emphasis on product packaging so as to ensure safe and secure deliveries. With the aid of our smart logistics network, we can easily furnish quick and massive requirements of the buyers

Charpy Test : The charpy test piece rests on alloy steel support anvils, fitted on the base of the machine rigidly held in position by Allen screws. End stopper is provided for quickly and accurately locating the test piece centrally between the supports.Izod Test : The Izod test is clamped vertically in Izod support fitted on the base of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece and the Allen screw enable clamping of the test piece in correct height with the help of Izod setting gauge supplied.Model IT-30 ( ASTM ) : This impact tester offered with 300J energy exclusively for Charpy test confirming to ASTM E-23. This machine is geometrically checked in the works to the more stringent requirements of the American standard. The accuracy of the machine is then verified by PROOF TEST by testing standard test specimens supplied the NIST, USA. Two sets ( Low & high energy-1 Set (4 Nos.) each.) must agree with the normal values within certain tolerance specified.

We are a reputed Manufacturer and Supplier of Aggregate Impact Testing Machine. This machine provides a relative measure of the resistance of an aggregate to sudden shock or impact. The Aggregate Impact Testing Machine offered by us, is well-acclaimed for its accurate results and longer working life. Description & Specifications It consists of base weighing between 20-30 kg with a lower surface of not less than 30cm and support columns to form a rigid frame work around the quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380 + 5.0mm. The hammer is provided with a locking arrangement. A metal tup (hammer) weighing 13.5 to 14.0 kg, the lower end of in cylinderical shape, 100mm in diameter and 5cm long with a 2mm chamfer at the lower edge and case hardened. Complete with a cylindrical cup, 102mm dia x 50mm depth, one measure 75mm dia x 50mm deep and a tamping rod of circular cross section 10mm in diameter and 230mm long, rounded at one end. Optional Accessories The following accessories are not part of the standard supply and are supplied at an extra cost. Test Sieve 10mm, 12.5mm and 2.36mm opening Laboratory OvenAutomatic Blow Counter Electronic Balance 500gm x 100 mg / Two Pan Balance.

• Usage: Impact Loading
• Voltage: 220V
• Frequency: 45Hz
• Automation Grade: Automatic
• Driven Type: Electric
• Color: Grey

With characteristics like unmatched standard and superior grade, our range of product is the finest one obtainable in Ahmedabad(India). We have substantial warehouse that is well-equipped with the cutting-edge technologies and upgraded machines; thus, we are capable of entertaining the voluminous requirements with super ease.

• Brand Name: Techplast
• Voltage: 220V
• Driven Type: Electric
• Material: Mild Steel
• Weight: 100-500kg
• Country of Origin: India
• Type: Charpy Impact Testing Machine
• Color: White
• Condition: New
• Operating Mode: Semi Automatic
• Warrenty: 1 Year
• Corrosion Resistance: Yes
• Machine Structure: Vertical
• Reverse Rotation: No
• Is It Variable Speed: No
• Packaging Type: Wooden Box, As per customer requirement
• Finishing: Polished, Chrome Finish, Powder Coated
• Width: 600 mm
• Phase: Single Phase
• Overall Length: 1000 mm
• Specialities: Rust Proof, Long Life, High Performance, Easy To Operate
• Dimension (LxWxH): 1000x600x800mm
• Usage: Impact Loading, Industrial

Our organization takes pleasure to introduce its business as one of the leading entity Impact Testing Machines Calibration Services . The machines are made available in manual and digital options. The pressure, gauge, mechanism, operation and timely deliveries are tested and calibrated by our experienced engineers. They offer the complete pressure calibration solutions with high capabilities. With outstanding accuracy and hefty digit resolution, these machines can be used in critical industrial applications where precision is most important. Features:Measure temperatureSimulate RTD outputOperable with seven typesApplications:SurgicalTextile RubberR D Labs  

• Release angle of pendulum: 150 degree.
• Range of scales: 0-2.71 Joules, 0-5.42 Joules, 0-10.84 Joules, 0-21.68 Joules and 0-25.00 Joules.
• Minimum resolution on scale: 0.02 Joule, 0.05 Joule, 0.1 Joule, 0.2 Joule and 0.2 Joule respectivel

Both Charpy and Izod impact testing are popular methods ofdetermining toughness or impact strength of a Composite Material. Tosum up, these tests measure the total amount of energy that a materialis capable to absorb. This energy absorption is directly related to thebrittleness of the material.

• Brand Name: Mett-Bio
• Material: Mild Steel
• Usage: R & D , Corrosion Evalution , Corrosion Study
• Certification: ISO 17025:2017 - NABL
• Finishing: Finished
• Type: Charpy Impact coupon - Mechanical,Corrosion Coupon
• Country of Origin: India
• Warrenty: 1 Year
• Standard: ASTM / NACE/ ISO
• Machinery test Report: Yes ( ISO 17025:2017 NABL Accredited Lab )

We are well reckoned as one of the distinguished impact tester suppliers in India. The API pendulum impact testing machine determines the impact strength of standard tension-impact specimens. This high-precision pendulum impact tester measures the performance of plastics and composites according to ASTM and ISO test methods for Izod, Charpy and Tensile Impact. The automatic break prevents secondary strike impacts and allows variable starting angles to ensure optimal impact velocity. Siemens-based PLC and operator interface used for all calibration and test functions. ISO / ASTM conformance for all sample types. Izod, Charpy and Tensile Impact Testing available for high energy Impact. Testing up to 50 joules. Automatic brake system. Computerized operator interface. Cold box low temperature impact testing (optional). Digital clamping force adjustment for Izod testing (optional). Test reports available through serial printer port. Instrumented Impact hammers available for R & O applications. ISO 179,180,8256. ASTM 0256, 06110, 01822 and others.

Extremely Useful for Packing Industry,Programmable Hold Time,Vacuum can stabilize for a set value less than 400 mm Hg,6”, 10”, 12” (Please specify while ordering),4-Digit Seven Segment Bright Red LED

• Weight: 100-200kg
• Voltage: 220V
• Automation Grade: Automatic
• Driven Type: Electric
• Warranty: 1year

Reference Standard: Machine is Designed According to ASTM D-1709 OR IS 2508. Specimen Clamping: Pneumatically Operated Clamps have been used to hold film. Release Mechanism: Electromagnetic Supporting of 2 Kg Weight with a Centering device to Ensure reproducible drop. Drop Mechanism: Dart drop mechanism is provide to dart drop at different drop height. Counter: Six digit electronic counters would be provided for counting number of trials. Dart Shaft: OD 6.5 mm and 127.5 mm At list long. Dart & Weight: As per Standard Test Method A & B (As per IS 2508) As per Standard Test Method A & B darts with Hemispherical Heads Acrylic Safety cover is additionally fitted on Clamping device to protect and avoid Damages of dart while drop. Covered Boxes are also provided in the machine to protect Weight Again Looses

Digital Izod / Charpy Impact Tester, Analog Izod / Charpy Impact Tester, Impact Tester for Plastic Pipes  

• Diameter: 230 Mm Long X 10 Mm Dia, 75 Mm Dia X 50 Mm High
• Weight: 13.75 +0.25 Kg
• Automation Grade: Manual
• Brand Name: Shreeji
• Usage: Laboratory
• Height: 380+5 mm

• Body structure: Fabricated from mild steel material
• Paint: Powder coating
• Steel ball diameters: Chrome steel ball Ø 19 ± 0,05 mm
• Free fall height of the balls: 1 meter
• Electrical Timing Device: To measure the interval between 1st and 2nd impact
• Controller reading: Direct reading in co-efficient of restitution
• Power Supply: 230 Volts, Single phase, AC Supply
• Applications: Instrument for the determination of the resistance to the impact of the ceramic tiles. Determination of the coefficient of restitution by dropping a steel ball from a fixed height onto the test specimen and measuring the height of rebound.

• Model No.: FDI- A
• Aluminium Dart: 5 gm to 500 gms
• S.S. Dart: 5 gm to 500 gm
• Vaccum Pump: 760 Hz Vaccum Pump.
• Counter: Digital counter of 9999 counts.
• Power Supply: 230V AC, 50Hz.
• Dimension: 22" x 20" x 85"
• Net Weights: 70 kgs.

The Impact properties of the of the polymeric materials are directly related to the Overall toughness of the material.   Toughness is defined as the ability of the polymer to absorb applied energy. Generally plastic films are being used for Packing purpose, which happen to undergo wear & tear. Hence strength of Impact Resistance is established to evaluate the quality and to get the impect load film can withstand. This method covers the determinates of the energy that cause, plastics film to fail under specific conditions of the impect of the free falling Dart.   This energy is expressed in terms of weight of mass feeling from specified height, which would result in 50% specimen's failure tested.     USP:   "Saumya" provides impesct tester for different plastic films, sheets, Decorative laminates, corrugated roofing sheets etc. with range of Darts & selectable facility of height of fall with low efforts.   "Saumya" provides two different Electromagnetic system for light & heavy Dart respectively which would help in selection of dart with smallest possible dart to heaviest one.   "Saumya" gives high tech vaccum pump with gauge and clamping system to clamp the film tightly. "Saumya" provides digital counter for counting no. of test.      

Applications To prepare correct "V" or "U" notches in Charpy/Izod impact test specimens by means of an accurate multiple-toothed broach Advantages Most simple and accurate Specifically drafted for ferrous & nonferrous material . Skilled operator not required Expensive machines not required Precision regrinding of tools eliminated Less power requirement Very compact in size Precisely cuts the desired notches as per respective standard in just single pass within few seconds. No efforts, all by motorized operation. Just press a push button to start. Equipped with broach guard for safety. Easy removal & assembly of broach Longer broach Life. Ball Screw for uniform cutting action. Hardness rods with LM bushes for smooth motion. Micrometer for fine feed and adjustment Excellent notch finish & Excellent Repeatability. Front door window access for observing the operation Notches confirm to the following standards ASTM A370, BS 131: Part 1: 1961 / Part 2&3: 1972, DIN: 50115, IS/1598/1977

Aggregate Impact Tester with Blow Counter (AIM 456)   It is for determining the aggregate impact value and has been designed in accordance with IS:2386 (Part 4), IS:9377. The sturdy construction consists of a base and support columns to form a rigid frame work around the quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380 ± 5 mm. The hammer is provided with a locking arrangement.   Industry Civil Infrastructure Construction Chemicals Dams & Tunnels Railways Sleepers Real Estate Refractories Roads, Highways & Bridges Tiles Education Architecture Building Technology Civil Department Geotechnical Science Colleges Metal & Material Tiles & Ceramics Traffic & Transportation Railways Roads, Highways & Bridges

Consists of Case hardened Mild steel cylindrical container of 150mm dia + 0.5mm x 130mm to 140mm high with base plate 200 to 230mm square x 6mm thick. A plunger of 148mm + 0.5mm dia x 100 to 115mm high. All parts directly coming in to contact with the specimen during the test are made of mild steel duly case hardened. Supplied complete with tamping rod, 16mm dia x 600mm long, one end rounded.

Introduction The aggregate crushing value provides a relative measure of the resistance of an aggregate to crushing under a gradually applied compressive load. The oven dried and accurately weighed aggregates are subjected to crushing test on compression testing machine and weight of the resultant fines passing the specified IS sieve to the total weight of the sample expressed a s a percentage is defined as Aggregate Crushing Value. The apparatus is available in three size 75mm dia for 1/8” to ¼” size aggregate, 150mm dia for 3/8” to ¾” aggregate (standard) and 300mm dia for 1” to 2” aggregate.   General Description & Specification: Consists of Case hardened Mild steel cylindrical container of 150mm dia + 0.5mm x 130mm to 140mm high with base plate 200 to 230mm square x 6mm thick. A plunger of 148mm + 0.5mm dia x 100 to 115mm high. All parts directly coming in to contact with the specimen during the test are made of mild steel duly case hardened. Supplied complete with tamping rod, 16mm dia x 600mm long, one end rounded.   Optional Accessories: The following accessories are not part of the standard supply and are supplied at an extra cost.   Cylinderical Metal measure 11.5cm dia x 18cm height with handle. Electronic Balance 3 kg. X 1 gm Compression Testing Machine Capacity : 500 kN Test Sieve 2.36mm, 10mm, 12.5mm and 14m

• Weight: 100-200kg, 200-300kg, 300-400kg, 400-500kg
• Voltage: 110V, 220V, 380V, 440V
• Automation Grade: Automatic, Manual, Semi Automatic
• Driven Type: Electric
• Type: Digital Impact Testing Machine
• Color: Blue, Brown, Creamy, Green
• Condition: New, Used
• Application: Industrial Use
• Power: 1-3kw, 3-6kw
• Warranty: 1year, 2years

The Aggregate impact value of coarse aggregate provides a relative measure of the resistance of an aggregate to sudden shock or impact. The oven dried and accuracy weighed aggregates are subjected to a total of 15 blows of specified weight and fall and percentage of fines formed in terms of the total weight of the sample is expressed as the aggregate impact value. The Apparatus consists of following:- A Testing Machine having a metal base with a painted lower surface of not less than 30cm in diameter. It is supported on level and plane concrete floor of minimum 45cm thickness. The machine have provisions for fixing its base. A Cylinderical cup of internal diameter of 102mm, depth 50mm and minimum thickness 6.3mm. A metal hammer or tup weighing 13.5 to 14 kg the lower end being cylindrical in shape, 50mm long, 100.0mm in diameter with a 2mm chamfer at the lower edge and case hardened. The hammer will slide freely between vertical guides and be concentric with the cup. Free fall of hammer will be within 380 + 5 mm A Cylinderical metal measure having internal diameter 75mm and depth 50mm for measuring aggregates. Tamping Rod 10mm in diameter and 230mm long, rounded at one end.

We are offering pipe impact testing machine. Falling height 2000mm height adjustment manually height adjustment resolution ± 2mm striker(dart) aluminum, s.s. (optional) striker (dart) weight as per standard striker (dart) release device pull release free falling mechanism diameter of test sample ø20mm to ø300mm sample clamping on 120° v block paint powder coated

DART IMPACT TESTING MACHINE is generally used to check impact strength of Plastic sheet and Films which are extensively used for packaging industries. Kant Plastology is serving this machine with robust construction and very operational ease mechanical fixtures. The offered apparatus determine the exact test result because of its perfect sample clamping attachment and friction free falling of Dart with dead weights release through magnet. The ease in operation and less maintenance are the key features of the machine.

This Instrument is in according to ASTM D 1709 BS, DIN, ISO, IS: 2508 (Indian Standard) or according to customer’s required specification A two piece annular specimen clamp having an inside diameter of 127mm The movable part of clamp is maintaining positive contact with the lower part of the contact to hold the film sample firmly Pneumatically operated clamps have been used to hold film successfully in to the clamps Electromagnet withstand 2 Kg. weight. Electromagnet unit is to be equipped with a centering device to ensure reproducible drop. Electric power is used to energize and de-energize the electromagnet Positioning device is provided to positioning the dart at a different drop height Position device is built in two parts. One is for 22cms and 66cms and another is suitable up to 152.4cm Darts and weights : As per standard Test Methods A and B darts with hemispherical heads

Generally Plastics Films are used for 'Packaging Application', and undergo wear & tear. Hence study of 'Impact' Resistance is established to evaluate the quality and mechanical property of the film. This method covers the determination of the energy that causes Plastics Film to rupture under specific conditions of impact of a Free Falling Dart (load). This energy is expressed in terms of weight (mass) of the missile falling from a specified height which would result in %age specimen's failure tested. TECHNICAL DETAILS Dimension (W x D x H): 22 x 20 x 84 (inch) Dart: As per IS – 2508 and ASTM D 1709 standard Supply: 220/230 V AC, 50 Hz Single Phase Approx Weight: 75 kg FEATURES The evaluation of 'Impact Strength' of different types of Plastics Films & Sheet, Decorative Laminates, Corrugated roofing sheets etc. Dart with different weights are available to drop from different height to study the fracture of the product. To clamp film specimen tightly, 'Vacuum Clamping System' is provided with 'Vacuum Ring & Gauge'. Electromagnetic Dart Holder is provided so as to hold the dart and drop at press of button. Evaluation can be carried out as per 'IS-2508, ASTM D-1709 & BIS-2782' standards.

Impact tests are designed to Measure the Resistance to failure of a Material to a suddenly applied force at different Temperature. The test measures the impact energy, or the energy absorbed prior to fracture. We are offering an Izod Impact Test and Chary Impact Test. Machine is calibrated by NABL Calibration agency and certified by NIST. Today it is utilized in many industries for testing materials, for example the construction of pressure vessels and bridges to determine how storms will affect the materials used

The aggregate crushing value provides a relative measure of the resistance of an aggregate to crushing under a gradually applied compressive load. The oven dried and accurately weighed aggregates are subjected to crushing test on compression testing machine and weight of the resultant fines passing the specified IS sieve to the total weight of the sample expressed a s a percentage is defined as Aggregate Crushing Value. The apparatus is available in three size 75mm dia for 1/8” to ¼” size aggregate, 150mm dia for 3/8” to ¾” aggregate (standard) and 300mm dia for 1” to 2” aggregate. General Description & Specification : Consists of Case hardened Mild steel cylindrical container of 150mm dia + 0.5mm x 130mm to 140mm high with base plate 200 to 230mm square x 6mm thick. A plunger of 148mm + 0.5mm dia x 100 to 115mm high. All parts directly coming in to contact with the specimen during the test are made of mild steel duly case hardened. Supplied complete with tamping rod, 16mm dia x 600mm long, one end rounded. Optional Accessories : The following accessories are not part of the standard supply and are supplied at an extra cost. Cylinderical Metal measure 11.5cm dia x 18cm height with handle. Electronic Balance 3 kg. X 1 gm Compression Testing Machine Capacity : 500 kN Test Sieve 2.36mm, 10mm, 12.5mm and 14m

• Usage: Aggregate Testing Equipment
• Packaging Details: Corrugated Box
• Place of Origin: Gujarat, India
• Port: Ahmadabad