Impact Testing Machine Dealers in Kathwada, Ahmedabad

We are a reputed Manufacturer and Supplier of Aggregate Impact Testing Machine. This machine provides a relative measure of the resistance of an aggregate to sudden shock or impact. The Aggregate Impact Testing Machine offered by us, is well-acclaimed for its accurate results and longer working life. Description & Specifications It consists of base weighing between 20-30 kg with a lower surface of not less than 30cm and support columns to form a rigid frame work around the quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380 + 5.0mm. The hammer is provided with a locking arrangement. A metal tup (hammer) weighing 13.5 to 14.0 kg, the lower end of in cylinderical shape, 100mm in diameter and 5cm long with a 2mm chamfer at the lower edge and case hardened. Complete with a cylindrical cup, 102mm dia x 50mm depth, one measure 75mm dia x 50mm deep and a tamping rod of circular cross section 10mm in diameter and 230mm long, rounded at one end. Optional Accessories The following accessories are not part of the standard supply and are supplied at an extra cost. Test Sieve 10mm, 12.5mm and 2.36mm opening Laboratory OvenAutomatic Blow Counter Electronic Balance 500gm x 100 mg / Two Pan Balance.

• Model No.: FDI- A
• Aluminium Dart: 5 gm to 500 gms
• S.S. Dart: 5 gm to 500 gm
• Vaccum Pump: 760 Hz Vaccum Pump.
• Counter: Digital counter of 9999 counts.
• Power Supply: 230V AC, 50Hz.
• Dimension: 22" x 20" x 85"
• Net Weights: 70 kgs.

The Impact properties of the of the polymeric materials are directly related to the Overall toughness of the material.   Toughness is defined as the ability of the polymer to absorb applied energy. Generally plastic films are being used for Packing purpose, which happen to undergo wear & tear. Hence strength of Impact Resistance is established to evaluate the quality and to get the impect load film can withstand. This method covers the determinates of the energy that cause, plastics film to fail under specific conditions of the impect of the free falling Dart.   This energy is expressed in terms of weight of mass feeling from specified height, which would result in 50% specimen's failure tested.     USP:   "Saumya" provides impesct tester for different plastic films, sheets, Decorative laminates, corrugated roofing sheets etc. with range of Darts & selectable facility of height of fall with low efforts.   "Saumya" provides two different Electromagnetic system for light & heavy Dart respectively which would help in selection of dart with smallest possible dart to heaviest one.   "Saumya" gives high tech vaccum pump with gauge and clamping system to clamp the film tightly. "Saumya" provides digital counter for counting no. of test.      

Charpy Test : The charpy test piece rests on alloy steel support anvils, fitted on the base of the machine rigidly held in position by Allen screws. End stopper is provided for quickly and accurately locating the test piece centrally between the supports.Izod Test : The Izod test is clamped vertically in Izod support fitted on the base of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece and the Allen screw enable clamping of the test piece in correct height with the help of Izod setting gauge supplied.Model IT-30 ( ASTM ) : This impact tester offered with 300J energy exclusively for Charpy test confirming to ASTM E-23. This machine is geometrically checked in the works to the more stringent requirements of the American standard. The accuracy of the machine is then verified by PROOF TEST by testing standard test specimens supplied the NIST, USA. Two sets ( Low & high energy-1 Set (4 Nos.) each.) must agree with the normal values within certain tolerance specified.

Our organization takes pleasure to introduce its business as one of the leading entity Impact Testing Machines Calibration Services . The machines are made available in manual and digital options. The pressure, gauge, mechanism, operation and timely deliveries are tested and calibrated by our experienced engineers. They offer the complete pressure calibration solutions with high capabilities. With outstanding accuracy and hefty digit resolution, these machines can be used in critical industrial applications where precision is most important. Features:Measure temperatureSimulate RTD outputOperable with seven typesApplications:SurgicalTextile RubberR D Labs  

Introduction The aggregate impact value of coarse aggregate provides a relative measure of the resistance of an aggregate to sudden shock or impact. The oven dried and accurately weighed aggregates are subjected to a total of 15 blows of specified weight and fall and percentage of fines formed in terms of the total weight of the sample is expressed as the aggregate impact value.   General Description & Specification: Consists of base weighing between 20-30 kg with a lower surface of not less than 30cm and support columns to form a rigid frame work around the quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380 + 5.0mm. The hammer is provided with a locking arrangement. A metal tup (hammer) weighing 13.5 to 14.0 kg, the lower end of in cylinderical shape, 100mm in diameter and 5cm long with a 2mm chamfer at the lower edge and case hardened. Complete with a cylindrical cup, 102mm dia x 50mm depth, one measure 75mm dia x 50mm deep and a tamping rod of circular cross section 10mm in diameter and 230mm long, rounded at one end.   Optional Accessories: The following accessories are not part of the standard supply and are supplied at an extra cost.   Test Sieve 10mm, 12.5mm and 2.36mm opening. Laboratory Oven. Automatic Blow Counter. Electronic Balance 500gm x 100 mg / Two Pan Balance.

• Body structure: Fabricated from mild steel material
• Paint: Powder coating
• Steel ball diameters: Chrome steel ball Ø 19 ± 0,05 mm
• Free fall height of the balls: 1 meter
• Electrical Timing Device: To measure the interval between 1st and 2nd impact
• Controller reading: Direct reading in co-efficient of restitution
• Power Supply: 230 Volts, Single phase, AC Supply
• Applications: Instrument for the determination of the resistance to the impact of the ceramic tiles. Determination of the coefficient of restitution by dropping a steel ball from a fixed height onto the test specimen and measuring the height of rebound.

Impact tests are designed to Measure the Resistance to failure of a Material to a suddenly applied force at different Temperature. The test measures the impact energy, or the energy absorbed prior to fracture. We are offering an Izod Impact Test and Chary Impact Test. Machine is calibrated by NABL Calibration agency and certified by NIST. Today it is utilized in many industries for testing materials, for example the construction of pressure vessels and bridges to determine how storms will affect the materials used

Digital Izod / Charpy Impact Tester, Analog Izod / Charpy Impact Tester, Impact Tester for Plastic Pipes  

Portable Metal Hardness Tester, Equotip Hardness Tester

Mechanical Impact Testing Machine, Topographic Mapping Services