Industrial Dryers Dealers in Narol, Ahmedabad

We offer Tray Dryer. Cabinet : cabinet of the dryer will be of 6/12/24/48/196 trays capacity, made from ms angle frame of double wall construction lined internally with 18 swg and externally 18 swg ms sheet. The cavity formed in between double wall will be properly insulated with 60 mm thick glass wool to prevent heat losses from dryer. Doors :heavy duty airtight hinged doors made from 16 swg ms sheet backed by 50 mm glass wool on the inner side and ball catch locking arrangement together with 40 mm asbestoses gasket rope ensure very sturdy construction of the dryer.air circulation :the uniform air circulation within the dryer will be carried by two nos. Of multi blade type ms fabricated fan mounted on externally on ball bearing pedestal and driven by 1 hp tefc electric motor. Air inlet and outlet dampers are provided on the top roof of the dryer cabinet.steam / thermic radiator :fins tube type steam radiator will be provided inside the oven. The radiator will be made of 14 swg erw tube with 26 swgcrca ms fins at 6 fpi. The tube will be expanded after fining.the radiator will be tested at a pressure of 7 kg/cm2 ( 100 psi ) pneumatically.heaters :strip-type heaters will be provided along the sides. The heaters are suitable to be operated on 415 volts, 3 phase, 4 wire system. Trolleys :the structure for the heavy-duty trolleys will be made from 40 mm ms angle and horizontal support will be of 25 mm angle. The design of trolley will be good enough for the proper hot air circulation. The trolley will be fitted with 2 nos. Castor wheel and 2 nos. Fixed wheel for the easy movement.control panel :pre-wired control panel will be consisting of digital temp. Indicator, contactor for motor, over current relay, fuses, indicating lamp, push buttons, main isolator switch etc.painting : the dryer will be spray painted with two coats of high temperature resistance aluminum paint and the outside cabinet have one coat of red oxide backed by hammer tone finished paint.

Available in different sizes start from 150 mm dia to 600 dia in different length and different construction of material like, M.S / S.S etc. These could be used either horizontally or up to an inclination of 45 degree or so.  

Tray Dryer is available from 6 Trays to 96 Trays in dirrerent model with SS 316 Trays for the drying of material with 70 to 80 degree temperature (Available with Steam & Heater Operated Models).

We are offering tray dryer. This is a batch type tray dryer suitable for small quantities wet material. It is either in ms or ss. Trays of ss or aluminum ranging from 12– 392 can be supplied according to customer’s requirement. The same is either provided with steam or electrical heating arrangement. Proper insulation is given to minimize heat losses. It has also auto start and cut off facility to maintain optimum temperature in the chamber. It has two to four fans according to trays capacity.

• Brand Name: Laxmi Group
• Condition: Good
• Product Type: Coal Dryer
• Place Of Origin: Ahmedabad,Gujrat
• Min. Order Quantity: As per client requirement

Coal Dryer that we manufacture, export and supply is widely in demand amongst buyers owing to its excellent performance. We offer our in-house developed patented design of coal dryer at very affordable rates. Limited availability of coal and increasing prices has made coal drying an excellent value proposition. Thus, our Coal Dryer is high in demand. We offer it at the most competitive rates.

We offer industrial gas dryers. This is the simplest of all desiccant based air dryers. In this dryer two desiccant towers are used. While one tower is in drying, second tower undergoes regeneration simultaneously. Part of dry air coming out from tower in-line goes for regeneration of the second tower. Tower changeover takes place at every 5 minutes by a sequence controller mounted in control panel. Salient features:- simple operation. Easy to maintain. Microprocessor based controller with purge saver. No need of heater or cooler. Atmospheric dew point of (-) 40 to (-) 60 deg c can be easily achieved. Simple operation.

• Type: Tray Dryer
• Brand Name: CEMTECH PHARMA MACHINERY
• Condition: New

Strong industrial base along with a wide area network, we deliver the range in the stipulated time span. We offer a variety of packaging options to our patrons and even provide customized packaging solutions. The labels on products are superior grade and do not smudge during shipping.

This is a batch type Tray dryer suitable for small quantities wet material. It is either in MS or SS. Trays of SS or aluminum ranging from 12– 392 can be supplied according to customer’s requirement. The same is either provided with steam or electrical heating arrangement. Proper insulation is given to minimize heat losses. It has also auto start and cut off facility to maintain optimum temperature in the chamber. It has two to four fans according to trays capacity.  

We bring forth highly precise Tray Dryer that is used for drying and dehumidification of moist pharmaceutical samples. Our Vacuum Tray Dryer is effectual for drying different kinds of materials as they temperature ranges from 30° C to 150° C. Rotary Tray Dryers are attached with electrical heaters. Moreover, we are one of the eminent Pharmaceutical Tray Dryer Manufacturers in India.

• Brand Name: Lemison
• Rated Capacity: 60 Kg
• Processing Time: 30 Minutes
• Motor Power: 2 hp 960 RPM / 2 hp 1440
• Weight: 950 kg
• Model Number: TDM - S60
• Dimension: 1390 X 1715 X 2345

microprocessor control:for automatic drying & cool-down time with digital temperature control.  step by step  display shows cycle status.self cleaning lint screen:the lint drops by itself at the bottom as the suction stops at the end of each cycle.steam radiator:steam radiator is of copper coils & aluminium fins. Thermic fluid radiator is of steel coils & aluminium fins. » tumble dryer » laundry tumble dryer » clothes dryer machine » tumble dryer machine manufactures » tumble dryer machine » laundry dryer machine » industrial tumble dryer » heavy duty tumble dryer » commercial tumble dryer » drying tumbler   » electric heated tumble dryer » gas heated tumble dryer » steam heated tumble dryer » industrial electric heating dryer » industrial drying tumbler machine  

We offer cooling dryer cylinders manufacturer of various types of rubber rollers we are engaged in manufacturing of dryer cylinders by a process which is acknowledged to be one of the most effective methods known as the -centrifugal cast process". Endowed with bearing metal qualities it can cause skin healing after abrasion. These dryer cylinders possesses a structure that is continuously wet by oil and sustains an oil film for a smooth functioning. Manufactured by high quality material ensures its durability and makes it more reliable to use. rubber roller manufacturing process: a. Giving appropriate hardness depending on type of printing b. Wide range of coating to counter chemical solvent effort. C. Outstanding rubber surface finish without porosity. D. Uniform hardness all over surface within = 1 shore -a- variation. E. No run out on finished diameter with reference to bearing size. advantages of our printing lamination rollers - long life - best printing result - maximum color registration - minimum or no chemical effect - anti-static

Uni-Mech Tray Dryer is an enclosed insulated chamber in which trays are placed in trolleys. Fresh air and re-circulated air is heated by Heating Elements and is re¬circulated in chamber resulting in heat transfers in materials. Uniform air circulation, controlled temperature, sturdy construction and large working space are the valuable features of the oven. TRAY DRYER is especially designed for Pharmaceutical, Food& Bakery, Chemical and Dyes & Intermediates. Uni-Mech Tray Dyers are manufactured from materials like Mild Steel, Different grades of Stainless Steel. (cGMP Model is available) Tray Dryers are operated by Steam, electrical heater, thermic oil or hot air.

• Capacity: Kcal/Hr.
• Temperature: Deg. C.
• Moisture: Inlet / Outlet.
• Type of Heating: Electrical / Steam / Thermic Fluid / Hot Air Generator.
• Electrical: Flame Proof / Non Flame Proof.
• Bulk Density of Feed: Kg/M3.

Product Description :   Tray Dryer is available in a range of 12 to 200 trays capacity. Tray size of 32" x 16" x 1 1/4". The heating is accomplished by Electrical / Steam or Thermic Fluid Radiator / Oil Fired Hot Air Generator.   Key Attributes:    » Uniform and Quick Drying.  » Maximum Temperature up to 550°C.  » Inside MS/Aluminum/SS316/304 or FRP Lined.  » High efficiency Axial Flow Fan design give better performance.  » Digital Temperature Indicator cum controller gives accurate temperature control.                            

Electrical heating Scope: The Air inside the Tray Dryer is heated by "U" tube MS/S.S. air heaters each of 1 KW. TheHeaters are fitted on the sides of the dryer to facilitate uniform heating. Maximum temperature Attained inside the dryer is 100' C and will be indicated and controlled by a Digital Temperature indicator cum controller over full range of heating load. Trays Description: Trays will be manufactured from 1.6 mm Alluminium /MS/SS sheets as per client’s application. The dimensions of Trays are 16" x 32" x 1.25". Trays have rounded corners with' mirror finish from inside and outside. Quality is available on demand Racks And Trolleys Racks are provided for trays inside the Dryer. They are of fixed type for 12 & 24 Trays Models. For 48,96 and 192 Trays Models racks are provided with wheels to slide them in and out of the Dryer.  An additional S.S, trolley for Racks for outside movement can be provided on request Advantages:   Large production capacity, Continuous operation; Simple structure, Easy to operate; less failure, Low maintenance costs; A wide range of application, Fluid resistance is small, You can use it to dry granule-like material, for those adhesion material It is also very beneficial; Operating flexibility, production flow allows the product to have a greater fluctuation range, will not affect the quality of the product Cleaning easy Simple system Flexibility in fuels used.

Plate dryer is an encased protected chamber in which plate are put on top of each other. Warmth exchange is finished by course of hot air by electric radiators or some other warming media. Blower fans are introduced inside to guarantee appropriate course and exchange of warmth. These dryers are utilized for differing applications, for example, Drying of Pigments, Food, Bakery, Electrodes, Chemical, Plastic, Powders and so forth. Determination :- It is a kind of Industrial Drying Oven however rather than wire-work racks it has aluminum plate for arrangement of items accessible with 12, 24, 48, 96, 192, aluminum plate of size 80D x 40W x 3H cms. Plate and council of dryer can likewise be manufactured in Stainless Steel. Overwhelming obligation trolleys can likewise be provided. Temperature go: upto 3000C. High temperature range can likewise be manufactured. Temperature control: Automatic-Electronic. Warming Media: Electrical , Diesel Fired or Gas terminated.

We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufucturing of Tray Dryer to Chemical Plants the Material. This is a batch type Tray dryer suitable for small quantities wet material. It is either in MS or SS. Trays of SS or aluminum ranging from 12– 392 can be supplied according to customer’s requirement. The same is either provided with steam or electrical heating arrangement. Proper insulation is given to minimize heat losses. It has also auto start and cut off facility to maintain optimum temperature in the chamber. It has two to four fans according to trays capacity.

• Material: Steel
• Automation Grade: Automatic
• Usage/Application: Fryums fingure Makka pauva
• Surface Finish: Powder Coated
• Capacity: 200 KG

We are engaged in manufacturing the reliable and durable range of tray dryer in various models and specifications. Fabricated using premium quality components like iron, steel and aluminum, these are high in performance and low on maintenance. It is provided with control panel for monitoring the temperature and for the uniform circulation of hot air in the drying chamber. The high end range of tray dryer that we offer to our clients are used for drying of bulk drug,pasty, amorphous food and drug,chemical materials. These are fabricated using premium quality components and material such as iron, mild steel, stainless steel and aluminium. outer body duly painted by long lasting paint inside surface is painted with heat resistant aluminum paint electrical, steam and oil heating mode provided with control panel for monitoring temperature designed for uniform circulation of hot air in the drying chamber

We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufucturing of Tray Dryer to Chemical Plants the Material. This is a batch type Tray dryer suitable for small quantities wet material. It is either in MS or SS. Trays of SS or aluminum ranging from 12– 392 can be supplied according to customer’s requirement. The same is either provided with steam or electrical heating arrangement. Proper insulation is given to minimize heat losses. It has also auto start and cut off facility to maintain optimum temperature in the chamber. It has two to four fans according to trays capacity.

We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufacturing of Tray dryer for chemicals plant machinery .This is a batch type Tray dryer suitable for small quantities wet material. It is either in MS or SS. Trays of SS or aluminum ranging from 12– 392 can be supplied according to customer’s requirement. The same is either provided with steam or electrical heating arrangement. Proper insulation is given to minimize heat losses. It has also auto start and cut off facility to maintain optimum temperature in the chamber. It has two to four fans according to trays capacity.

• Capacity: Up to 300 cfm
• Material: Stainless Steel
• Automation Grade: Automatic
• Voltage: 240 V
• Surface Finish: Polished
• Application: Industrial

Spray dryers are the tools to produce dry powders from a slurry or liquid substance via quickly drying it with the means of hot gas. It is one of the most preferred methods of drying the thermally sensitive products, for example pharmaceuticals and food.The spray dryers utilize spray nozzle or atomizer to diffuse slurry or liquid into restricted drop volume spray. The spray dryers are high in demand in the industry because of their properties to turn products into vaporized form. The reliable and trustworthy manufacturer of result-oriented spray dryers is the Nidhi Engineers.The droplet sizes generated by the spray dryers, range from 20 to 80 μm which also depends on the nozzle. The spray dryers are highly durable and resistant to pressure which makes a must-have-it for the industries. The operation system of the spray dryers is easily comprehensible and handy to all looking for ways to minimize products. For nay customized function in the spray dryer, reaching Nidhi Engineers will be the best decision for the customer.

Our Tray Dryer Is Designed For Uniform Circulation Of Hot Air In The Drying Chamber. Electrical / Steam / Oil Heating Mode SALIENT FEATURES:- Inside Surface Is Painted With Heat Resistant Aluminum Paint And Out Side With Synthetic Enamel.  cGMP Models With SS 316 Construction, Single Page Design, Coving Coroners, Fully Washable Type Models Available.  Inside Of The Dryer. If Consists Of Starters, Contactors, Safety Relays, Ckt Breakers, Indicating Lamps, Push Buttons, Timers, Controllers Etc. Construction External Tray Dryer: 2mm Thick Internal: 2mm Thick Moc: CGMPSurface Finish External Tray Dryer: Buffed To 150 Grit Matt Finish Internal Tray Dryer: Buffed To 220 Grit Mirror Finish. Inlet & Outlet:- All Tray Dryers Have A 5 Micron Pre Filter At The Inlet And A Manually Infinite Adjustable Damper At The Outlet. Door:- Doors At Provided At The Front And / Or Rear Side Of The Dryer. Door Lips Are Lined With Silicon Rubber Gasket To Prevent Any Leakages. Suitable Locking Is Provided For The Doors Of Tray Dryer. Air Circulation:- Air Circulation Is Done By Specially Designed Recirculation Blowers Inside The Tray Dryer. The Blower Capacity, Static & Design Depends On The Size And Model Of Dryer. Heating: Dryers Are Normally Supplied With Either Steam/ Electric/ Thermic Fluid / Hot Water Heating System. Suitable Heating Coils / Caloriefiers Are Provided In The Tray Dryers. Temperature Control Temp Control System Is Done By Electronic Digital Temp Controller Fitted In The Control Panel. The Temp Control In The Dryer Is Fully Automatic. Trays:- Trays Are Available In S.S. 304/ 316 Q. All Trays Are Fully Die Pressed And With Coved Corners. Trays Are Buffed To Mirror Finish. Trays Are Also Available In Aluminum / Polypropylene / Frp/ M.S. Galvanized As Per Clients Requirements. Trolley:- Trolley Is Provided In The Tray Dryers To Accommodate Trays In It. Trolley Trucks Are Used To Load And Unload The Trays Into The Dryer. Control Panel:- Automatic Control Panel Is Fitted On The Side Of The Dryer. If Consists Of Starters, Contactors, Safety Relays, Ckt Breakers, Indicating Lamps, Push Buttons , Timers, Controllers Etc.

We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufacturing of Tray Dryer to Chemicals Plants machinery .This is a batch type Tray dryer suitable for small quantities wet material. It is either in MS or SS. Trays of SS or aluminum ranging from 12– 392 can be supplied according to customer’s requirement. The same is either provided with steam or electrical heating arrangement. Proper insulation is given to minimize heat losses. It has also auto start and cut off facility to maintain optimum temperature in the chamber. It has two to four fans according to trays capacity.

Industrial Spray Dryers are among the distinguished names in the industry for manufacturing and exporting Industrial Spray Dryersto a wide clientele. The offered spray dryers are extensively used in a wide range of industries including chemical, food processing, dyes, paints, dairy and pharmaceutical. These dryers are effective in drying of liquid and are meant to increase the productivity of work.

High Effective Hot Air Re-circulation - Tray Drying Technic Application & Process : Tray Drying Ovens are used for drying of pharmaceutical powders, granules, Pigments, Food, Bakery, Electrodes, Chemical, and Plastic etc in an effective and economical way by hot air re-circulation. Tray dryer is an enclosed insulated chamber in which trays are placed on top of each other. Heat transfer is done by circulation of hot air by electric heaters or any other heating media. Blower fans are installed inside to ensure proper circulation and transfer of heat.   Salient Features : Available in 24, 48, 96 & 192 Trays. Design is cGMP - Current Good Manufacturing Practices compliance. All contact parts AISI 316/304 & non contact parts AISI 304/ M.S. with painted. Highly effective uniform air re-circulating system by low speed fan. Inlet air filter and damper at inlet and exhaust air damper for air flow controls. Controls panel with Digital temperature controller and process timer controller. Mobile trolleys are provided which are used to load and unload the trays into the dryer. Optional Features : Heating system Electrical / Steam / Gas Heating. Separate Inlet AHU with HEPA Filtration. Perforated tray Standard Painted Model. Safety Features : Automatic Temperature & controls, Process cycle controls. Overload relay Protection and Emergency stop button