Industrial Dryers Dealers in Nikol, Ahmedabad

• Capacity: Up to 300 cfm
• Material: Stainless Steel
• Automation Grade: Automatic
• Voltage: 240 V
• Surface Finish: Polished
• Application: Industrial

• Brand Name: Adinath
• Supply Ability: 5 Unit/Units per Month
• Packaging Details: Product & transport worthy wooden packing
• After-sales Service Provided: Engineers available to service machinery overseas
• Model Number: ATD
• Port: Ahmedabad

We are the main supplier of this product.

Our Tray Dryer Is Designed For Uniform Circulation Of Hot Air In The Drying Chamber. Electrical / Steam / Oil Heating Mode SALIENT FEATURES:- Inside Surface Is Painted With Heat Resistant Aluminum Paint And Out Side With Synthetic Enamel.  cGMP Models With SS 316 Construction, Single Page Design, Coving Coroners, Fully Washable Type Models Available.  Inside Of The Dryer. If Consists Of Starters, Contactors, Safety Relays, Ckt Breakers, Indicating Lamps, Push Buttons, Timers, Controllers Etc. Construction External Tray Dryer: 2mm Thick Internal: 2mm Thick Moc: CGMPSurface Finish External Tray Dryer: Buffed To 150 Grit Matt Finish Internal Tray Dryer: Buffed To 220 Grit Mirror Finish. Inlet & Outlet:- All Tray Dryers Have A 5 Micron Pre Filter At The Inlet And A Manually Infinite Adjustable Damper At The Outlet. Door:- Doors At Provided At The Front And / Or Rear Side Of The Dryer. Door Lips Are Lined With Silicon Rubber Gasket To Prevent Any Leakages. Suitable Locking Is Provided For The Doors Of Tray Dryer. Air Circulation:- Air Circulation Is Done By Specially Designed Recirculation Blowers Inside The Tray Dryer. The Blower Capacity, Static & Design Depends On The Size And Model Of Dryer. Heating: Dryers Are Normally Supplied With Either Steam/ Electric/ Thermic Fluid / Hot Water Heating System. Suitable Heating Coils / Caloriefiers Are Provided In The Tray Dryers. Temperature Control Temp Control System Is Done By Electronic Digital Temp Controller Fitted In The Control Panel. The Temp Control In The Dryer Is Fully Automatic. Trays:- Trays Are Available In S.S. 304/ 316 Q. All Trays Are Fully Die Pressed And With Coved Corners. Trays Are Buffed To Mirror Finish. Trays Are Also Available In Aluminum / Polypropylene / Frp/ M.S. Galvanized As Per Clients Requirements. Trolley:- Trolley Is Provided In The Tray Dryers To Accommodate Trays In It. Trolley Trucks Are Used To Load And Unload The Trays Into The Dryer. Control Panel:- Automatic Control Panel Is Fitted On The Side Of The Dryer. If Consists Of Starters, Contactors, Safety Relays, Ckt Breakers, Indicating Lamps, Push Buttons , Timers, Controllers Etc.

• Weight: 100-1000kg
• Color: Silver
• Voltage: 220V
• Power: 1-3kw
• Application: Drying Paddle
• Automatic Grade: Semi Automatic
• Driven Type: Electric

• Power Supply: 110V / 220V, 50 / 60Hz
• Max. Power: 3150W
• Heating Distance: >4000nm
• Max. Heating Area: 1000 x 1200mm
• Ground Ash Heating Time: 8 Min.
• Priming Heating Time: 10 Min.
• Surface Heating Time: 15 Min.
• Timer: Yes
• Size: 800 x 1150 x 2500mm

The dryer consists of the centrifugal baskets which rotates at high speed via motor , the wet components are loaded in to the baskets , due to the centrifugal action and heating effects the components became dry with in short time cycle .

• Warranty: 1
• Voltage: 240v
• Max Temperature: 300 C
• Weight: DEPEND AS PER SIZE
• Display Type: DIGITAL
• Capacity: 3 TO 12 TRAY
• Design: Customized
• Model Number: KJ45
• Control: MICRO POSSESSOR
• Automatic Grade: Semi-Automatic
• Electricity Supply: SINGLE

Dryers are used in a variety of industries, such as the food processing, pharmaceutical, paper, pollution control and agricultural sectors. Diverse materials need to be dried in completely different businesses, such as chemicals for research and medical concerns, paper for printing and packaging operations and edible materials for further processing into popular foods and snacks.

 Cabinet   Cabinet of the dryer will be of 12/24/48/96 Trays capacity, made from MS angle frame of double wall construction lined internally with 18 SWG and externally 18 SWG MS sheet. The cavity formed in between double wall will be properly insulated with 60 mm thick Glass wool to prevent heat losses from dryer.  Doors Heavy duty airtight hinged doors made from 16 SWG MS sheet backed by 50 mm Glass wool on the inner side and ball catch locking arrangement together with 40 mm asbestoses gasket rope ensure very sturdy construction of the dryer.  Electrical Heating The Air inside the Tray Dryer is heated by "U" tube S.S.304 air heaters each of 1 KW. The heaters are fitted on the sides of the dryer to facilitate uniform heating. Maximum temperature attained inside the dryer is 100' C and will be indicated and controlled by a Digital Temperature indicator cum controller over full range of heating load.    Total heating load for it will be    12 Trays Dryer - 4 KW    24 Trays Dryer - 6 KW    48 Trays Dryer - 12 KW    96 Trays Dryer - 24 KW The heaters will be inserted inside tubular pipe to prevent it from becoming RED HOT. The terminals of the heaters will be brought outside the dryer to make it safer for operations for solvent based products. (OPTION FOR FLAME PROOF ELECTRICAL HEATERS ARE ALSO AVAILABLE)  Air Circulation Air inside the dryer is circulated by one heavy duty axial flow S.S.304 or alluminum blower fitted on a shaft of and driven by l H.P. through belt. The special design of the Blower ensures uniform air circulation so that there is uniform air current over the entire charge loaded in the Trolley inside the dryer. The working of the motor is indicated by lamps in the control panel.  Trays Trays will be manufactured from 1.6 mm SS 304 sheets. Its dimensions are 32" x 16" x 1 l/4". The Trays have rounded corners with' mirror finish from inside and outside. SS 316 quality is available on demand.

Our product is available in nontoxic and industrial-grade packaging materials that ensure the products are safe from damage and reach buyers in brand new conditions. We offer our clients to make online and offline payment to facilitate the trade and make payment process completely hassle free.

APPLICATION & PROCESS : Tray Drying Ovens are used for drying of pharmaceutical powders, granules, Pigments, Food, Bakery, Electrodes, Chemical, and Plastic etc in an effective and economical way by hot air re-circulation. Tray dryer is an enclosed insulated chamber in which trays are placed on top of each other. Heat transfer is done by circulation of hot air by electric heaters or any other heating media. Blower fans are installed inside to ensure proper circulation and transfer of heat. SALIENT FEATURES : Available in 24, 48, 96 & 192 Trays. Design is cGMP - Current Good Manufacturing Practices compliance. All contact parts AISI 316/304 & non contact parts AISI 304/ M.S. with painted. Highly effective uniform air re-circulating system by low speed fan. Inlet air filter and damper at inlet and exhaust air damper for air flow controls. Controls panel with Digital temperature controller and process timer controller. Mobile trolleys are provided which are used to load and unload the trays into the dryer. OPTIONAL FEATURES : Heating system Electrical / Steam / Gas Heating. Separate Inlet AHU with HEPA Filtration. Perforated tray. Standard Painted Model. SAFETY FEATURES : Automatic Temperature & controls, Process cycle controls. Overload relay Protection and Emergency stop button.

The vacuum tray dryer fosters fast drying of heat and air sensitive materials that need the drying to be done without any kind of agitation. It is actually a tray dryer that works sternly under different vacuum conditions. The heat sensitive materials inside the dryer are dried at low temperature conditions under the vacuum. Some of the main materials that dried using vacuum shelf tray dryer include, hollow fibers, medical equipments, chemical salts, dyes, granulated products, pharmaceuticals and food extracts that include, gluten, glues, pepsin etc. Characteristic Features The powder tray dryer holds the placement of all shelf and manifold collection outside the chamber, which in turn avoids the leaks. Charge temperature measuring provision inside the dryer delivers the exact picture of the process by taking the temperature into account directly at charge. Stainless steel furnished vacuum type tray dryer components with high thermal efficiency and even heat distribution. External heating of the chamber walls for the protection of condensation on the internal walls. Round edged wall shelves and product trays in the pharma vacuum tray dryer for effective cleaning and less accumulation and residue formulation. Widely used in pharmaceutical, herbal, chemical and food stuff industries Technical specifications:

The Vacuum Paddle Mixer Dryer is suitable for mixing and drying the material which can not operate at low Temperature easily oxidized, poisonous in nature. It operates at low Temperature efficiently under vacuum. It is used for raw materials drying and mixing powder or granules of Pharmaceutical Materials, Crystalline, Insecticides, Pesticides, and Food industry and heat sensitive products. Material that cannot undertake high temperature. Material that is easy to oxidize. Material that do not permit to destruct. To recover material with residual volatile. Material with vigorous irritative and toxicity The Vacuum Paddle Mixer Dryer consists of a jacketed cylindrical shell with rotating with specially designed Paddle Agitator type blade by rigid fabricated structure motor, gear box. There is provision for application of vacuumized inside the shell and circulation of heating media in the jacket during the rotation of the stirrer. The large heating surface area presented by the internals surface of the shell ensures uniform drying of the product, as the product gently moving & fluidized while the Paddle stirrer rotates. The diffusive action induced by the mixing stirrer constantly presents a fresh layer to come into contact with the indirectly heated walls of the shell. A well designed sealing system enable maintenance of deep vacuum inside the shell, and also ensures positive circulation of a heating media in the jacket. In operation, material is filled to the top of the shell. The shaft rotates at relatively low speed and the moving paddles push and fluidized the material back and forth mixing it. The outer Paddle rotation displaces the material from the ends to the center while the inner paddle rotations move the material from the center to the ends. This counter-current action results in homogenous blending. Mixing is achieved in 15 to 20 minutes with 90 to 95 % or better homogeneity. The bottom discharge provided for unloading of the material and easy cleaning of the mixing drum. Specially designed self adjusting sealing arrangement of unique design is provided to ensure that no black particle enters into the mixing drum.     Salient Features : Design is cGMP- Current Good Manufacturing Practices compliance. All contact parts AISI 316 & non contact parts AISI 304. Continuous rotation of paddle stirrer, material will make continuous movement and fluidized in the container and reach to uniform mixing and drying at low temperature. Dust free operation. High vacuum operation Fast and uniform homogeneous mixing & draying at low temperature. Solvent recovery Continues vacuum maintain during process. Very low value of final moisture even at low drying temperatures. Option for two type design of shell 1. Cylindrical type and 2. "U" shape. Continues vacuum maintenance during process. Vacuumized closed system with condenser, Receiver for solvent recovery & Cyclone separator to recovery the solid particle. Rapid & Complete discharge / Zero holdup after discharge Heating media can be used steam/ hot water / hot oil. Rigid drive with reduction gear box, motor and stuffing box for shaft sealing. Charging pot, Vacuum connection, sight glasses, Vacuum relief valve & gauge are provided on top of the shell. Connection at jacket will be provided for steam Inlet, safety valve, Pressure gauge and steam trap. The discharge with butterfly valve/Slide valve at bottom side of the shell Optional Features : Option for two type designed of shell 1. Cylindrical type and 2."U" shape. Option for Flame Proof Electrical. Option for Automatic Charging Option for lump breaker. Option for condenser, Receiver & Cyclone for solvent recovery. Option for advance PLC Controls with HMI touch screen. Safety Features : Temperature controls, Vacuum relief Valve, Over load protection and Emergency stop.

• Voltage: 415V
• Material: ms to ms
• Phase: 3 phase
• Heating Media: Electric
• Number Of Tray: 8
• Max Temperature: 250'c
• Brand Name: vijay
• Automation Grade: Semi-Automatic

INTRODUCTION CHITRA drying oven is specially designed for Pharmaceuticals, Food, Chemicals, Paints, Textiles & other industries. It is well accepted for economical drying of granules, powder , food material & chemicals. CONSTRUCTION "CHITRA"Drying oven is fabricated out of rigid angle iron frame with double walled panels insulated with best quality compressed fibre glass and with a rigid door fitted with strong hings and best choosen locking arrangement. A control panel is fixed in front of the oven to facilitate the operation easily. It has a large working space and is available, manufacturing from mild steel & in good finishing outside with synthetic enamel colour & inside painted with heat resistent paint to resist temperature up to 300 degree, in Standard Model. It is also manufacture completely from SS304 or SS316 ( As per customer requirement ) in GMP Model & polished to the mirror finish from inside & matt finish from outside. DESCRIPTION The Drying ovens are normally available with choice of heating mode, as electrically heated / steam heated & thermic fluid heated.. In electrically heated model, digital temperature controller provided with digital timer to facilitate working day and night. In steam & thermic fluid heated model, digital temperature indicator is provided with digital timer , but the temperature controller is not supplied with the machine. AIR CIRCULATION A highly effective recirculating air system is provided. The heated air, is recirculated with fresh air in selected proportions for optimum drying. The system is designed so that the materials at the top & the bottom dry simultaneously. Uniform air circulation, controlled temperature, sturdy construction and large working space are the valuables of the oven which is suitably designed to cover wide temperature range, loading and unloading is faster and simple. In higher capacities trays trolley rolls in and out of the chamber. For continuous operation a spare trolley can be had for loading while the drying cycle is taking place. CONTROLLED TEMPERATURE & TIME Digital temperature controller with digital timer are supplied to facilitate working day and night. OPTIONFlame proof fittings and motor. S.S.304 / S.S. 316 Trays. APPLICATIONPharmaceutical, food, chemicals and other industies.

For drying of knits in relaxed condition to achieve shrinking and feel while drying. Also suitable for drying PolyesterViscose suiting to avoid the damage to the yarn and for getting softer feel. The Equipment, available in singleMulti layer drying system, with thermic oildirect gas fire as heating media, for tubular and open width fabrics upto 3000 MM working width.