Industrial Gearboxes Dealers in Bapu Nagar, Ahmedabad

WORM GEAR REDUCTION UNITS : Reduction gear unit are manufactured in different sizes in adopter types as well as solid foot mounting type to transmit minimum 0.05 HP. With selection of correct sizes. Normally available in reduction ratio of 5 :1 to 70 : 1.   WORM : The worm is Solid with shaft made of high grade alloy steel so as to give hard wear resisting surface duly case hardened & super finished. The Bearing & Oil Seal generals are accurately, cylindrically Ground to give smooth running.   WORM WHEEL : It is made of centrifugally cast phosphor Bronze rim shrunk and keyed on cast iron center block on bigger unit and solid casting for smaller units. The teeth are hobbed on gear hobbing machine.   GEAR HOUSING : It is made of close grain graded cast iron. Large cooling fins on both sides and adequate cooling area improves efficiency.   BEARING : The ball or roller bearings are used in worm wheel with ample capacity so that is can take journal and thrust loads.   OIL SEAL : Best quality of oil seal are used (fenner)   SPECIFICATIONS : Wherever they can be applied in material and construction, they are made almost to I.S.S. 3734 – 1966 for worm gearing or DIN or Latest ISI standard.   GUARANTEE : Every “CROWN” worm reduction gear units is guaranteed for “ONE YEAR” against manufacturing defects. If any gear is becoming defective within guarantee period the same will be replaced free of charge provided it is sent to our works on site carriage paid. Any defect caused by accident on transit or miscue is not covered by guarantee.

We are instrumental in manufacturing and trading industrial bevel gearbox. The offered gears are used for transmission of power in a gamut of industries including oil refineries, windmills, civil engineering and food processing. They are remarkable in terms of performance and do not generate noise while operating. They are resistant to thermal expansion, corrosion and pressure fluctuations. These gears are extremely safe to use. Specifications: available range 7 diffrent size power transmitted up to 750 h. P ratio 1:1 to 5:1

Extruder Gearboxes in double reduction parallel shaft horizontal and vertical models are intended to satisfy characteristic requirements and conditions encountered in single screw extrusion process. The gear units are quite capable to transmit the high torque required for pressurising and plasticising moulding materials. They can also absorb the high axial thrust through built-in spherical roller thrust bearing. A separate critically designed axial bearing housing accommodate thrust bearings of different sizes according to application loads. The hollow output shafts mounted with the different thrust bearings have different bores to accommodate the thrust screw. The units can be offered in Left hand or Right hand configurations with horizontal and vertical mounting to meet specific mounting needs.     The modular design of GHE Series gearboxes offer a great range of flexibility in the interchangeability of parts.  

• Gear Type: Vertical
• Packaging Type: as per party requirement
• Power: 0.25hp to 1 hp
• Material: metal gear/al body
• Orientation: Horizontal
• Mounting: Foot
• Input Speed: 1400 rpm
• Warranty: 1 year
• Usage/Application: Industrial
• Gearing Arrangement Type: Worm
• Number Of Ratio: as per party requirement

• Voltage: 48v
• Speed: 88±10%rpm/55±10%
• Torque: 7N.m/11N.m
• Output Power: 65w
• Current: 4A

• Color: Blue
• Mounting: Foot Mounted, Flange Mounted ,Shaft Mounted Models 

We are main supplier of this product.

• Country of Origin: India
• Material: Alloy Steel
• Certification: ISI Certified
• Specialities: Rust Proof, Long Life, High Performance, Easy To Operate

We are offering helical bevel

KRIZEL SHAFT mounted speed reducers are excellent quality control products and manufactured with excellent precision KRIZEL SMSR are very compact in design, totally enclosed designed for direct mounting on the drive shaft at the driven equipments. The direct mounting principle ensure positive and permanent alignment of the speed reduce and minimizing space requirement and layout problems. It also eliminates the foundations. SALIENT FEATURES OF KRIZEL SHAFT MOUNTS ARE: All Gears are of high grade alloy steel for higher efficiency. Hardened and ground helical gear train. Each unit supplied with corrosion resistant torque arm & double lip oil seals. Torque arm, hub covers and puller ring supplied as standard accessories. Severe duty grease purged seals on high speed shaft prevent leakage and subsequent drive failure. Long gear and bearing lifetime due to heavier design. All mounting positions possible. Easy to mount, Space saving, Low noise level KRIZEL SHAFT mounts are widely used in quarry and crushing plants, conveyor systems, asphalt plants, road construction machinery, special purpose machines, bakery machines, cement and mining industries etc. SPECIFICATIONS Model : Available in different sizes from AK to KK. Ratios : Available in three ratios of 5:1 , 13:1 & 20:1 Power : Higher power rating for maximum torque from 0.25 kw to 100 kw. Mounts : Vertical, horizontal and direct drive mounting configurations. Lubrication : Oil splash type lubrication. Housing : Cast iron case construction. KRIZEL shaft mounted speed reducers are metric in design to meet any position requirements and satisfy a wide range of output speeds and horse power.

• Brand Name: SKYLON
• Model Number: SE110 TO1010
• Rated Power: 1 HP TO150HP
• Gearing Arrangement: PLENETARY

Planetary gear box mfg. Ratio: 5 :1 to 500 related hp 1 to 150 foot mounted, flange mounted,& as per aplication

AGNEE H series helical parallel shaft and bevel helical right angle drive industrial gearboxes have been introduced to meet the requirements of today's demanding applications in the medium and heavy-duty sector of the power transmission market. The modular design and construction of the Series H offers many engineering and performance benefits including a high degree of interchangeability of parts and sub assemblies. This in turn provides considerable economies of production while maintaining the highest standard of component integrity.Apart from standard range, Gear Boxes are also tailor made to suit individual requirement or as per specifications provided. Please feel free to discuss your requirement and we shall be pleased to make suitable suggestions.   Product Specification: Gear tooth geometry design combines maximum efficiency with high load carrying capacity and minimal noise generation. Serviceability of the product was key in the design of the Series H range allowing easy maintenance for long life and reliability, which are synonymous with our field reputation. Unit Sizes: 80, 90, 100, 112, 125, 140, 160, 180, 200, 225, 250, 280, 315, 355, 400, 450, 500, 560, 630 Transmission ratio: 1.2 - 637 Input Power: 0.61 KW to 5,000 kW Torque: Up to 117,000 Nm

• Power: 0.18kw to 10.0kw
• Material: aluminum / cast iron
• Gear Ratio: Upto 1:6
• Gear Type: worm
• Mounting Type: foot
• Orientation: Horizontal, Vertical
• Torque Range: 25-500nm
• Capacity: 0.25hp -10.0 hp

KRIZEL SHAFT mounted speed reducers are excellent quality control products and manufactured with excellent precision KRIZEL SMSR are very compact in design, totally enclosed designed for direct mounting on the drive shaft at the driven equipments. The direct mounting principle ensure positive and permanent alignment of the speed reduce and minimizing space requirement and layout problems. It also eliminates the foundations. SALIENT FEATURES OF KRIZEL SHAFT MOUNTS ARE: All Gears are of high grade alloy steel for higher efficiency. Hardened and ground helical gear train. Each unit supplied with corrosion resistant torque arm & double lip oil seals. Torque arm, hub covers and puller ring supplied as standard accessories. Severe duty grease purged seals on high speed shaft prevent leakage and subsequent drive failure. Long gear and bearing lifetime due to heavier design. All mounting positions possible. Easy to mount, Space saving, Low noise level KRIZEL SHAFT mounts are widely used in quarry and crushing plants, conveyor systems, asphalt plants, road construction machinery, special purpose machines, bakery machines, cement and mining industries etc. Model : Available in different sizes from AK to KK. Ratios : Available in three ratios of 5:1 , 13:1 & 20:1 Power : Higher power rating for maximum torque from 0.25 kw to 100 kw. Mounts : Vertical, horizontal and direct drive mounting configurations. Lubrication : Oil splash type lubrication. Housing : Cast iron case construction

ur organization is engaged in offering a wide range of Helical Gear box to our valuable clients. Features: : Precise design Simple usage Highly durable Product Description: Elecon make gearbox in Well condition Ratio 20 :1

• Material: Cast Iron
• Packaging Type: Box
• Brand: Amrut
• Gearing Arrangement Type: Worm

• Brand Name: Delta
• Features: Easy to operate and rugged in design , Provides optimum printing and ensures longer service life , Automated techniques
• Usage/Application: Elevator

"Shrinathji Engineers & Fabricators" Shaft Mounted Speed Reducer are compact, totally enclosed and are designed for direct mounting on the drive shaft of the equipment to be driven. The direct mounting principle assures positive and permanent alignment of the Speed Reduce and the driven machine and permits convinient location of the motor, minimizing space requirements and layout problems. It also eliminates the foundations."Shrinathji Engineers & Fabricators" Shaft Mounted Speed Reducers offers unlimited installation flexibility, it is to be mounted with a tie-rod. "ORKAY" Shaft Mounted Speed Reducers are designed to meet any position requirements and satisfy a wide range of output speeds and horse power requirements."Shrinathji Engineers & Fabricators" Speed Reducers consists of hardened precision - machined alloy steel Helical Gears mounted on micro finish Shafts supported on long life precision bearings with the capacity to handle maximum loading. The two - peice close Grain C.I. housing provides sturdy support and insures permanent accurate alignment of all components."Shrinathji Engineers & Fabricators" Shaft Mounted Speed Reducers is metric in design and AGMA Standards have been adopted wherever required "Shrinathji Engineers & Fabricators" Speed Reducers is manufactured in 6 different sizes and have Gear Ratios of 5:1, 13:1 and 20:1.

• Power: 7.5 KW
• Voltage: 220 V
• Material: Cast Iron
• Packaging Type: Box
• Country of Origin: Made in India
• Frequency: 50 Hz
• Phase: Three Phase
• Brand: Trisons Drives
• Input Speed: 1400 RPM

The ELMECH reduction gearboxes of this series are built according to modern criteria in a compact form. Both the gearboxes for co-rotating and for counter-rotating twin-shaft extruders consist of a primary reduction gear unit and a distribution gear unit. which are linked by means of a thrust-bearing housing and by a pressure flange that absorb the axial thrust coming from the extruder. Housing :The housing is made of high-quality cast-iron or fabricated from electro-welded steel. Gears : The gears of the primary reducer unit are made of case-steel of the 18NiCrMo5 type and have a helical teeth. The profile is ground with a higher quality to ensure lowest noise level and efficient use. The shaft and the toothed wheels of the distribution gear unit are made of high-quality special steel with excellent tensile strength.Bearings : The gearboxes of this series are provided with cylindrical roller bearings of reputed makers and considerable size. The thrust bearings are of the axial self aligning roller type of the 294... E series. They are coupled with bearing packages. Lubrication : A combined splash and forced spray lubrication system guarantees optimal lubrication, even in unfavourable environmental conditions, best heat elimination and low losses. plash and forced spray lubrication with integrated oil reservoir for emergency running properties. Integrated lubrication system with flanged oil-pump, oil-filter and pressure switch.

We are offering best two stage helical gear reducer supplying company.

We offer a wide range of Gear box which is manufactured as per the various specifications provided by our clients. Our gear boxes are available with cast iron gear case which are specially designed to make it dust proof and air tight.

Worm Gearbox, Planetary Gearbox, Helical Gearbox

With the support of our sophisticated manufacturing unit, we are involved in providing our clients with a wide range of helical shaft mounted speed reducers. The range offered by us is developed under the guidance of our expert professionals who ensure that the reducers delivered by us are at par with industry standards. Along with this, they ensure to offer customization facility in accordance with the clients specifications. salient features: assured speed reducer is developed in eight gear case sizes, designated by the letters b through to j. The eight sizes that are available in our range may have anyone of three nominal gear ratio v-belt drive. Our range is normally oil lubricated, but is equal to 5:1, 13:1 and 20:1.a very wide choice of final driven speed can also be determined using an appropriate in pally suitable for "lubricated for life" greases.

Planetary Gear Reducer, Control Panels, Servo Motor, Stepper Motor

heavy duty reduction gear box, ELEVATOR, Rail Clips, lop doors, cop doors

• Brand Name: VANSOPRAS
• Country of Origin: India

We are manufacturer from ahmadabad-gujarat(india),for f series helical geared motors,k series bevel helical geared motors,parallel shaft helical gear boxes.

Rolling Shutter Gear Box With Lock

Reduction Gearbox, Sprocket Wheels, Sprocket Gear, Pulleys, Coupling