Industrial Heaters Dealers in Gidc Vatwa, Ahmedabad

Situated in Gujarat(India), ours is the name reckoned for providing quality products at competitive price. Feel free to approach us, if seeking for top-of-the-line quality Hot Water Generators!

• Voltage: 230V
• Phase: Single
• Country of Origin: Made in India
• Packaging Type: Box
• Frequency: 50/60 HZ
• Brand: Panchal Engineering
• Cartridge Material: Stainless Steel
• Diameter: 10mm

• Length: 6-10 Inch
• Frequency: 50 Hz
• Max Temperature: 150 To 250 Degree C
• Material: Steel
• Certification: CE Certified
• Application: Industrial Use
• Voltage: 220V

HOLY SCIENTIFIC is one of the leading science equipment manufacturer & exporter of science equipments, science instruments, lab equipments, lab instruments, testing equipments, testing instruments, like Digital bio-safety cabinet, vertical & horizontal laminar air flow cooling & heating instruments like ultra low temperature deep freezers, BOD incubators, hot air oven, muffle furnace, microscope, fume hood environmental test chamber, water distillation plant, SDI kit, ocean grapy meter, water testing kit, PH meter, soil samplers & all types of laboratory & science instruments. This laboratory & scientific instruments used for laboratory sterilization, clean room, microbiology, pathology, bio technology, pharmaceuticals, seed & soil testing, metallurgical, food processing, customized instruments.CONSTRUCTION :-RASAYAN offer a wide range of Lab Heating Mental that is manufactured using high grade raw materials such as glass sieves which are reinforced and further insulated with the help of glass wool fitted with energy regulator lamp. For a better convenience this equipment is supported by an on/off switch with a plug and cord. The RASAYAN mantle is the most compact mantle with an M.S or S.S shell that can heat flasks up to 10 liters. This mantle has a durable M.S or S.S housing outside and resilient glass fabric inside to support flasks and protect flask walls from thermal strain. Only the bottom of the flask is covered so the contents being heated are fully visible. The mantle is grounded through the aluminum housing and requires a support as shown below. We bring forth a wide variety of Heating Mantles which are extensively used in laboratories to apply heat to containers. Our Laboratory Heating Mantle is available with a sturdy aluminum body. Its epoxy powder finish makes it a distinguished product. The Heating mantle which we offer is best suited for round bottom flask. Proper electric wiring makes certain that no short circuit takes place. The high temperature range of 2500C degrees Celsius makes our Heating Mantles ideal for industrial use. We are a leading company engaged in Flexible Fabric Heating Mantles Manufacturing in Ahmadabad.MODE OF HEATING :-These mantels are used for non hazardous safe areas. Mantels are designed to cover flasks at the equator and to heat the flask uniformly. These can be used to heat liquids up to 300oC. Heating elements are perfectly insulated by glass sleeving & ceramic beads.Features : Aluminum body with epoxy powder coat finish. Fiber glass net with long lasting nichrome heating element. High grade glass wool insulation. Suitable for round bottom flask. Energy regulator with corresponding lamp indicator to control the temperature. Temperature Range: Up to 2500C degrees Celsius. Digital temperature display. (Optional) Element temperature range of ambient to + 250 °C. Indication lamp for heater ON/OFF. Electrical: 230 V, 50 Hz, single phase.  

Our organization is highly conscious about the product quality and for this; it considers industry-defined parameters for complete quality satisfaction. Due to our streamlined packaging system, we are able to meet standard as well as tailored packaging requirements of the patrons. Also, we guarantee complete safety of the products.

• Approx Price: Rs 1.05 Lakh / Unit

The Wood Fired Thermic Fluid Heater, which we supply, is known for its robust and precise construction and high durability. Substances that are used for the production of different types of goods are named as raw materials. We source these materials only from the trustworthy vendors after complete checking. Over the years, we have become a primary choice of the buyers sine our product is qualitative and deliveries are time bound.

• Voltage: 415V
• Brand Name: Air Blow Systems
• Application: DRYING
• Country of Origin: Made in India
• Condition: New
• Features: Safe to use, Easy to install, Long service life
• Material: MS,SS
• Phase: 3 Phase
• Power: 12 KW to 200 KW
• Frequency: 50 HZ
• Color: SIlver

• Brand Name: Aadeeah
• Material: Steel
• Finishing: Raw
• Color: Silver, Grey And Multiple
• Condition: New
• Power: 50kw -2000kw
• Power Source: Electric
• Application: Industrial Use
• Certification: Nil
• Length: Costomized
• Voltage: 220V, 380V
• Packaging Type: Carton Box, Open body
• Size (mm): Costomized
• Dimensions (mm): Costomized
• Temperature Capacity: 100-250c
• Specialities: Rugged Construction
• Type: Hot Water Generators, Hot air geberators.
• Thickness: 6to 20'mm
• Efficiency: 70to 82
• Warranty: 6months
• Country of Origin: India
• Diameter (mm): As per Design
• Max Temperature: 150 To 250 Degree C
• Fuels: Solid fuel
• Min Heat Output: 50kw
• Max Heat Output: 2500 kw
• Weight in Kg: 1000-10000kg

• Temp: Ambient to 380degree
• Usage: Hospital, Laboratory

You can purchase supreme quality Hot Water Generator from us at reasonable prices. Our range of Hot Water Generators can easily operate on different fuels. We offer our esteemed customers with efficient Hot Water Generators that are fabricated using advanced machinery and skilled labor. We are eminent Suppliers and Exporters of Hot Water Generator from Ahmedabad, Gujarat. Our range of Hot Water Generators is highly durable, robust and functions fluently. 

Electric Oil Heater, Air Bubble Rolls, Teflon Coating Roller

Thermotech” : Thermic Fluid Heater’s are available in Horizontal & Vertical Models where in thermic fluid can be heated up to normal 340 oC at near atmospheric pressure with efficiency as high as 92% on GCV of Oil and Gas fuel. Thermic Fluid Heater Capacity = 0.1 MKcal/hr to 15 MKcal/hr Maximum Temperature = 370 Deg. C Application: Chemical, Textile, Technical Textile, MDF and Particle Board, Plywood and Laminates, Oil & Gas, Packaging, Rubber, Pharmaceuticals, Food Processing, Metal, etc... Fuel to Handle : Furnace Oil, LDO, Diesel, N. Gas, LPG, Hydrogen, etc.. Quality Assurance : ISO 9001 : 2008 since more than 7 years. Thermic Heater - Gas Oil / Fired Burner “THERMOTECH” : THERMIC FLUID HEATER’S are available in HORIZONTAL & VERTICAL MODELS where in thermic fluid can be heated up to normal 340 oC at near atmospheric pressure with efficiency as high as 92% on GCV of Oil and Gas fuel. The Main Heat Exchanger is designed with an integrated combustion chamber made out of High Heat Resistant Steel Tubes : BS 3059 P-1 or Seamless Pipes : SA106 Gr.B S40 of adequate size, explicitly designed with twin concentric multi start helical coil. The Coil is inserted into M.S. Shell with structures supports to place complete assembly leveled. The system is 3 pass on flue gas side, which ensures optimum heat transfer with counter current flow principle. The combustion chamber is designed to maintain safe distance between coil tube surface and burner flame, which ensures optimum heat transfer, long thermic fluid life due to lesser film temperature & safety of helical coil tube, which ultimately safeguards the complete heat exchanger. HORIZONTAL UNIT WITH EXTERNAL AIR PRE HEATER This new “HT” series of Thermic Fluid Heater – Horizontal model is improved version, which have demonstrated their good design & to which new Technologies & Materials are added to improve efficiency up to 93%, energy saving, simplify the maintenance, low smoke emission & able to integrate with PLC & SCADA system with ease. The Stack Heat from Exhaust flue gases of Main Heat Exchanger are recovered by means of Combustion Air Pre Heater (CAPH) & fresh combustion air is preheated before going to burner, which improves combustion efficiency, reduces stack temperature, reduce fuel consumption & save environment. The Combustion Fuels : “THERMOTECH” : Thermic Fluid Heaters are designed for all commercial & special fuels available in market for combustion. Fuels like : Kerosene / Diesel / Light Diesel Oil (LDO-LFO) / Furnace Oil (HFO) / Natural Gas / LPG / Pipeline N. Gas, etc. are combustible with same efficiency, which is thankful to our combustion experts who designs combustion parameters & Air to fuel ratio for best output.

Product Description :   The high performance Aero Therm Thermic fluid heater built with following safeties:    » Circulating pump motor interlock.  » Low level in expansion tank.  » Low fuel oil temperature (F.O. fired only).  » 2 Nos. of reassure switch for no flow/low flow.  » High thermic fluid temperature.  » Flame monitor by photocell (LDR). Salient Features:    » Coil from Seamless ASTMA 106 GR-B Pipes.  » Independent Drive for Fuel Pump 1440 RPM.  » No Scale Formation.  » Easy & Economical Operation.  » Outside purview of IBR. Details require for quotation:    » Capacity in KCAL/HR.  » Temperature in Deg. C.  » Type of Fuel in Light Diesel Oil / Furnace Oil / L.P.G. / Natural Gas.

• Capacity: 00, 000 KcaL/hr, 1, 000 Kcal/hr TO 50
• Fuel: Wood /Coal / Agro waste / Bio-Mass
• Firing Mode: Manual And Fluidization Bed Combustion Systems

PRODUCT SPECIFICATION The RHB is a vertical shell type, two pass design hot water generator. The combustion chamber is enclosed by a water jacket. An air jacket encloses the water jacket. The air blower is attached at the bottom. Air is preheated before it enters the combustion chamber, thus increasing efficiency. Capacities available are from 20,000 Kcals/hr to 1,50,000 Kcals/hr. Standard models are available in light oil firing with the rugged Ross burner. Gas fired units are also available. Outlet temperature normally is 95º C. Due to the shell type design, unit is ideally suited for higher water flow rates. Being very easy to run & maintain, it is one of the most popular designs in the market today.  

• Voltage: 220 V
• Material: Aluminium
• Power Source: Electric
• Power(Watts): 100 W
• Shape: Circular
• Diameter: 38 mm

• Capacity :: 1,00,000 Kcal/Hr TO 50,00,000 KcaL/Hr
• Temperature :: Up to 350° C

Wood or Coal Fired Horizontal Hot Water Generator Wood or Coal Fired Horizontal Hot Water Generator is a Solid Fuel Fired Hot Water Generator. It is available in Vertical & Horizontal Smoke Tube Type. At atmospheric pressure. 140 & 180°C pressurized type.

• Voltage: 230 Volt
• Type: Electric
• Usage/Application: Puja,Bhakti
• Power: 80 watt
• Brand Name: Thermal
• Heater Material: Stainless Steel
• Model Name/Number: ITE
• Capacity: 25 gram
• Color: steel
• Heating Element: Nickle chrome

These heater are made of Incoloy, Chrome Steel sheated Tube Consist of mgo Compacted heating element available in ‘U’ shape with mounting bracket. Made as per required size with or without MS-SS fins for rapid and uniform heat transfer for forced air heating. Size : 6.70 mm , 8.20mm, 10.80 mm od Application : Industrial Air heating, Packaging ind., Pharmaceutical Ind., Ovens, Air Conditioning systems & Laboratory Instrument, Textile, Printing, Corrugation Machine, Humidity control units, Plastics industries.

• Application: Textiles,Salt,Chemical,Printing,Colour,Agro,Pharm,Enviro,Etc...
• Material: Stainless Steel
• Fuel: Oil/Gas/Solid/Elect
• Voltage V: 415
• Maximum Temperature: Up to 380 deg C
• Heat output: 10M

In this model water is directly heated in the solar flat plate collector and heated water goes to upper level of the insulated hot water storage tank. BENEFITS Saves 60% to 90% of your water heating Energy consumption Reliable low maintenance operation Hot water regards less of the weather. Can qualify for valuable Government environmental incentives Reduced energy use saves up to 3.2 Tones of CO2 emissions every year FEATURES Compact and light weight Durable and aesthetically designed Look Best performance and economical. Electrical back up facility for additional heating Easy to install Thermosyphon operation minimizes maintenance-no moving parts.

• Application: Industrial Use
• Heater Material: Copper
• Capacity: 3 mtr/ Hr
• Temperature: 960 degree C
• Billet Size: 200 x 750 mm

• Power Source: Electricity
• Voltage: 120 - 240 V
• Heater Material: Sheathed Steel & Incoloy

• Application: Industrial
• Brand: Thermotech
• Material: SS
• Surface: Galvanized

 LDO Gross Calorific Value : 10700Kcal/Kg.   LDO Net Calorific Value : 10200Kcal/Kg.   FO Gross Calorific Value : 10200Kcal/Kg.   FO Net Calorific Value : 9650Kcal/Kg.

• Power Source: Electric
• Power(Watts): 1000(W)
• Maximum Sheath Temperature: 480 Degree Celsius

• Capacity: 50000 kcal/hr to 75 lacs kcal/hr
• Fuels: Oil/Gas Fired