Industrial Hoses Dealers in Ashram Road, Ahmedabad

• Thickness: 0.5 mm to 25 mm

manufacturing cold drawn of Stainless Steel Seamless & Welded Tubespipes with 15 pilger mills, bright annealing furnace, 5 draw benches, 3 tube mills etc. Cold finished TubesPipes are produced out of quality seamless hollows which are manufactured in house in unit-III. Seamless hollows are either cold pilgered over pilger mills or cold drawn over draw benches using precision tooling (dies & plugs) to achieve perfect dimensions and smooth surfaces.

• Material: Stainless Steel
• Finishing: Polished
• Country of Origin: Made in India
• Brand Name: Aeroflon Engineers Private Limited
• Packaging Type: Box
• Compressor Type: Screw Compressor

• Type: Hydraulic Hose
• Material: Iron, Plastic, PVC, RUBBER, Synthetic Rubber
• Thickness: 0.1-0.5mm, 0.5-1mm, 1-2mm
• Condition: New, Used
• Color: White,Black,Red
• Name: Hydraulic Hose Pipes
• Packaging Type: Coil,Roll,Poly Bags
• Finishing: Polished,Color Coated

• Material: Titanium
• Brand Name: Imported
• Usage/Application: Chemical Handling
• Size: 1 Inch
• Single Piece Length: 6 Meter

• Temperature: 270° C to 700° C
• Pipe Size: N.B. 6 mm to 200 mm

Stainless Steel Corrugated Hose Pipes A large variety of Metallic Flexible Hoses & Hose Assemblies, AISI 321 , 316 , 316 Ti AND 316 L grades conforming to international quality standards. Suitable for wide range of Temperature From: 270° C to 700° C.

Air preheater tubes are made from Cold Drawing process and are generally of Carbon Steel material. The application of these tubes is in an area where the tubes is not subjected to extremely high temperatures and pressures. Hence, the use of Carbon Steel tubes in applications for Air Preheater Tubes is generally preferable. There are various types of Air Preheaters; one of them widely used is Tubular Type Air Preheater. In this type of Air Preheater, straight tube bundles are used, which pass through the outlet ducting of the boiler and open at each end outside of the ducting, The hot furnace gases pass around the air preheater tubes, transferring heat from the exhaust gas to the air inside the preheater. Ambient air is forced by a fan through ducting at one end of the air preheater tubes and at other end the heated air from inside of the tubes emerges into another set of ducting, which carries it to the boiler furnace for combustion. There are other Heat Exchangers like Regenerative Heat Exchangers, Recuperators, economizers which also make use of Air preheater tubes (Heat Exchanger Tubes).

• Color: White
• Material: Nylon
• Hollow Sections: Circular
• Size/ Diameter: 50 mm
• Usage/Application: Construction
• Hardness: 37 HRC
• Hole Diameter: 20 mm

• Shape: Round
• Length: Upto 12 Meter
• Color: Silver
• Feature: Corrosion Proof, Excellent Quality
• Finishing: Polished
• Country of Origin: India
• Thickness (SCH): S 5, S10, S 20, S 40, S60, S XS, S80, 5100, S 120, S 140, S160, S XXS
• Available Grades: TP-304/L/LN/H, TP-316/ULN/H/Ti, TP-317L, TP-321/H, TP-347/H TP-409, TP-410, TP 430Ti, T-439

Material : TP 304, 304H, 304L, 304LN, 316, 316H, 316L, 316LN, 316Ti, 309, 310, 317L, 321, 347, 409 410, 420, 430, 446, 202

• Packaging Type: Carton Box
• Outer Diameter: 30mm
• Usage: Industrial Use, Home Purpose
• Brand Name: Magic Hose
• Shape: Round
• Color: Blue
• Finishing: Coated
• Fluid Type: Water
• Overall Height: 15m
• Specialities: Scratch Proof, Perfect Finish, Optimum Performance, Easy To Use
• Is It Flexible: Yes
• Hose Lining: Yes

• Super soft: 124

We are Manufacturer and supplier of PVC Lay flat Tubing in thickness of 0.06mm to 0.200mm and width of 6" to 36" for packaging & Stationery Application. We cater better quality best services to our client in all over India.

• Condition: Sterilized
• Material: Plastic
• Anticoagulant: EDTA
• Usability: Disposable

Polyurethane Pneumatic Tubes can be availed from us in standard and custom-made forms at market leading prices. PU Pneumatic Tubes made available by us are highly demanded for diverse usage in automotive industry. Offering the range in varied sizes and other specifications, we have emerged a top Polyurethane Pneumatic Tube Manufacturer, Supplier and Exporter from India.

• Working Pressure: 25 kg
• Material: Rubber Pipe And Stainless Steel
• Nominal Size: 1/4 Inch and also Available in upto 12 Inch
• Color: Black
• Usage/Application: cng auto
• Length: 2 foot
• Application: Gas Industries,Oil Industries,Chemical Industries

We are offering Pvc Reinforced Hose

• Material: PTFE
• Working Pressure: 0.3 - 30 MPa
• Country of Origin: Made in India
• Features: Maximum strength, Industry approved design, Excellent durability.
• Application: Industrial
• Nominal Size: 2 inch
• Nozzle Material: SS
• Temperature: -40 to 212 Degree C
• Unit Length: 20 - 30 m

kisan nylon braided pvc hose, pvc conduits pipes, SUCTION TUBING

The anti-shock rigid spiral imparts superior crush resistance to the hose. Specially formulated PVC compounds develops a top grade medium duty Suction & Delivery hose for meeting the challenging service conditions in Suction & Delivery of water for irrigation purpose agriculture with electric mono block and oil engine. Also for Suction & Delivery of saline water, light acids, alkalies and other chemicals except solvents for conveying of granules or fine particles of raw materials in processing industries in general this flexible hose can work with superior efficiency and offers more service life compared to rubber suction and delivery hoses.

Dutron Kanaflex is considered as the most trusted name in flexible PVC hose pipes in India and around the world. It is most suited for suction and delivery of liquids/gases in varied applications. Dutron Kanaflex PVC Hoses are convenient, light weight and flexible compared to rubber hose. Dutron Kanaflex PVC Hose are manufactured with the technical know-how from Totaku Industries Inc., Japan since 1970’s. Composition: Dutron Kanaflex PVC Hoses are made by adequate reinforcement secured by proper placement of hard spirals of rigid PVC in soft PVC wall that imparts strength and flexibility.

Highly Flexible and light weight The transparent hoses show inner movement Good resistance to chemicals, pressure and abrasion, ideal for transporting powders and granular materials

• Brand Name: Ace Polymer
• Application: Drinking Water, Utilities Water, Chemical Handling, Plumbing, Gas Handling
• Single Piece Length: 3 meter, 6 meter, 18 meter, 36 meter, >36 meter
• Size/Diameter: 1/2 inch, 1 inch, 2 inch, 3 inch, 4 inch, >4 inch

As per IS 636 type A , B & 8423 ISI marked Internally Rubber lining combined with closely woven polyester fibre. Wrap made of multi ply high tenacity fibres Smooth inner lining surface with very low friction loss Heat and abrasion resistance.

• Size: 6mm to 101.6mm OD
• Thickness: 0.5mm to 6.0mm

Stainless Steel Welded Tubes/Pipes are produced out of prime quality stainless steel strips procured from reputed approved vendors. Strips are converted into tubular form over tube mill & edges are welded using tungsten inert gas (TIG) welding technique. Inside weld bead is removed with bead rolling equipment fitted on the mill. Welded tubes/pipes are subjected to solution annealing, straightening and pickling operations. Finished tubes/pipe undergo various testing as per the specification/customer's requirements followed by marking and packing.

Stainless Steel Cold Drawn Seamless Straight & 'U'Bend Tubes & Pipes. Welded Stainless Steel Tubes & Pipes Bright Annealed Tubes & Pipes

• Features: High strength , Anti corrosive , Excellent finish .
• Item Code: CHH02

• Material: SS
• Length: Customized
• Burst Pressure: 540 Bar

• sizes range: 20.00 mm to 88.90 mm

We manufacture a range of high quality Stainless Steel Welded Tubes, that are used in various industrial applications. The cold rolled stainless steel strips are welded into tubes in the state of the art tube mills under fully automated precision process. Complying with the international standards, these can be availed in various sizes and specifications to suit the diverse requirements of the clients. The manufacturing of tubes begins with slitting of strips of required width based on the diameter of the tubes to be formed. Stainless steel slitted strips are passed through a series of rollers and tubes are formed automatically on different stands with rolls and welded on fully automated process of TIG welding without the addition of filler metal.

• Country of Origin: Made in India
• Material: PVC
• Pack Type: Roll
• Head Shape: Round
• Brand: Vrundavan
• Size/Diameter: 1/2inch
• Length of Pipe: 12m
• Features: High performance, Sturdy construction, Long life

• Size: 38mm / 50mm / 63mm / 70mm / 75mm / 100mm - 15 mtrs / 7.5 mtrs.

internally rubber lining combined with closely woen polyester fiber, wrap made of multiply high tenacity fibers, chemicals resistance and protection against ageing, smooth inner lining surface with very low friction loss. controlled percolating hoses, made from synthetic yarn for extra strength.     rs   98 per metre    from varuney mfg.indsutries rajesh shah 

• Country of Origin: Made in India
• Diameter: 65mm
• Product Type: RRL Hose Pipe
• MARKED: ISI MARKED