Industrial Oil Dealers in Vatva, Ahmedabad

This system is forced circulation fully automatic thermic fluid heater where thermic fluid is circulated in a closed loop through heater and user equipment circuit where the heat is dissipated to process. The same thermic fluid is re-circulated through heater for heating. The thermic fluid heater gives high temperature upto 300 oC using thermic fluid oil at near atmospheric pressure as compared to steam heating which requires 85 KgCm2 pressure.

• Packaging Type: Tin, Barrel, Bucket, Can
• Packaging Size: 0-40 L, 40-100 L
• Brand Name: Dux, Rustx, SANLUB, Lubri Chem, Mechtol, Ciifrol
• Application: Industrial Lubricant
• Flash Point: 0-100 Degree C, 100-200 Degree C
• pH Value: 0-7, 7-20

The Kalonji oil or black seed oil is a magical bullet which can best treat health ailments like hypertension, diabetes, cataract, asthma, severe cough, polio, paralysis, arthritis, rheumatic pain, headache, earache, tooth pain, epilepsy, jaundice, cancer, psoriasis and other health problems like uterus problems, skin diseases, diseases related to women and brain problems.

• Outlet Temperature(max): 300oC
• Electric supply: 415 Volts + 5% 50 H2 3ph – 6Wire.

heat output (kcalhr) : 50.000, 1.00.000, 2.00.000, 4.00.000, 6.00.000, 10.00.000, thermal efficiency : 87%, thermic fluid pump motor : 2.0h.p. 3.0 h.p.7.5h.p. 10.0h.p. 12.5h.p. 25.0h.p. Thermic fluid pump rating : 6.000ltrhr, 12.000ltrhr, 18.000ltrhr, 30.000ltrhr, 36.000ltrhr, 45.000ltrhr

• Speed - n -: 960 / 1450 / 2900 rpm
• Temperature: 350 ºC
• Working Pressure: 15 Bars
• Pump sizes – DN -: 32 mm to 100 mm

"Flowchem" Series PPC pumps are Centrifugal Pumps in Back Pull-out Construction , Horizontal, Center line Mounted, Single stage, End suction and Top Centerline Discharge Suitable for Thermic Fluid & Hot Oil also.

Hot Thermic oil is used as heating media. Air is heated by hot Thermic oil. Due to high temperature of oil, heat transfer area required is less than steam heater. Hence cost of Thermic oil air heater is less than that of steam heater for same, heat load. Higher air temp. Can be obtained in these heaters where as to obtaiv higher air temp. In steam heaters it requires high steam pressure.

We hold expertise in offering recycling of waste oil. Ignite oil concept petrochem is a nice grade industrial fuel developed with an objective to deliver value for money, easy to use to customers. Recycled waste oil by ideal fuel to be used in boilers, thermic fluid heaters and others. The recycled waste oil falls under class “c” fuels have flash point above 1000 c. The recycled oils are generally the blend of distillate component and a small amount of residual component.

Circulating pump motor interlock.Low level in expansion tank.Low fuel oil temperature (F.O. fired only).2 Nos. of reassure switch for no flowlow flow.High thermic fluid temperature.

The "Multitech Engineers" The fully automatic Three pass heating systems essentially comprises of a fully automatic packaged Oil/Gas fired heater. As a result thermic fluid can be heated up to 300°C at near atmospheric pressure, with efficiency as high as 87% on NCV of Oil/Gas fuel.The capacity ranges from 50000 kcal/hr to 15 lacs kcal/hr in Oil/Gas firing

• Country of Origin: India
• Type: Hydraulic Oil
• Color: Yellow
• Feature: Long Life
• Condition: New
• Brand Name: Lubricants
• Packaging Type: Bucket
• Packaging Size: 26 LIT
• Application: industrial
• Quality: 26 liter
• Density: 0.8650-0.8939kg/L
• Model/Grade: 68
• Flash Point: 210 deg C
• Pour Point: -27
• Kinematic Viscosity: 40-100
• Packing Size(Litres): 0-5
• Viscosity Grades: 68
• Cincinnati Milacron: P68,P69,P70
• FZG Gear Test: 11
• Minimum Order Quantity: As per Client Requirement

• Color: White
• Country of Origin: India
• Density: .775

Mineral turpentine oil is a petroleum-derived solvent used in a variety of industrial and household applications. It is used as a paint thinner, in adhesives, and in the production of soaps and detergents. It is also used as a fuel for camping stoves and lanterns and as a cleaning agent for metal parts. In addition, mineral turpentine oil is used in the production of perfumes and fragrances.

All types of industrial lubricating oils & greases. Hydraulic oils, industrial gear oils, compressor oils, refrigeration compressor oils, thermic fluids, turbine oils, cutting oils, spindle oils, all types of greases, hi-temperature greases, etc.

• Packaging Size: 2 Litre

• Packaging Size: 200 Kg
• Brand Name: Yamuna Chem
• Purity: 98%
• Material: Finishing Chemicals
• Usage/Application: Textile Finishing
• Packaging Type: Plastic Drums
• Shelf Life: 2 Years

The Veritol 80W-90 enjoys the technology Veritol developed in making the “Veritol Heavy Duty Oil Stabiliser”, the number one supplemental oil in the heavy duty industry. This gear oil formula is fortified with special anti-wear agents and lubricity agents to control wear and drag as well as special additives to control heat. These features are not found in ordinary gear oils. This gear oil is both excellent for race cars and any heavy-duty application where plain gear oils just aren’t good enough.

We have the expertise of over 25 years in manufacturing, supplying, and exporting the most advanced range of Oil Cooled Servo Voltage Stabilizer. Made with the latest equipment and technologies, it is recognized as the most productive and efficient machine in the global market. Constructed with the use of finest materials, the Oil Cooled Servo Voltage Stabilizer is exceptionally durable. The lateral features help it in yielding incomparable output with aplomb. With an eye to matching all the possible needs of various industries, the stabilizer comes in several models. Customized solutions are delivered on specific demands as well. It has been developed to enhance the productivity with optimum ease. It is the latest features and design that make it an automatic choice in many industries such as, air conditioning as well as medical plants, telecommunication system, and more.   Features : Exceptionally durable Rigid construction Developed to enhance productivity Maximum output Technical Specification : Input Voltage : 340-480V, 300-500V, 360-460V or 380-480V Line to Line, 3 Phase 4 Wire or as per specified by the customer. Output Voltage : 415±1% line to line nominal or as specified by customer Rate Of correction : 16-100V/sec line to line Response Time : 10 m sec Efficiency : 98% at full Load. Protections: - over Voltage & under voltage Cut-off, overload, Short circuit, and single Phasing Preventer. Output Voltage Adjustment +/- 10 V Servo Motor drive : AC Synchronous Moto Effect of Load Power Factor : Nil Insulation Class-B Offered unit has LCD display showing input/output voltages and load current along with Fault/trip messages

• Working Pressure: 2.5 to 3.5 Kg/cm²
• Size Range: 1/2″ to 12″

We Manufacture Quality Valves of almost all types for a wide spectrum of users in the Process & Chemical,Refineries & Petrochemicals,Fertilizers,Drugs & Pharmaceuticals,Thermal Power Stations,Nuclear & Atomic Power Stations,Textiles,Dyes & Intermediates, Paints & Varnishes,Sugar,Breweries & Distilleries,Soaps & Detergents, Steel Plants,Food & Oil Industry, Solvent Extraction Plants, Sewage, Effluent & Water Treatment, Cooling Water,Ship Yards and Marine Management,Water Works,Pulp & Paper,LPG Bottling Plants, Onshore & Offshore platforms, Slurry & Ash handling.

• Packaging Type: Barrel
• Color: Light Yellow
• Usage/Application: Industrial
• Max Use Temp Range: 300 degree

Features: > Low surface tension: It readily wets clean surfaces to impart water repellency and release characteristics. > Low toxicity: Tests have shown that Silicone oil is essentially non-toxic and non-irritating (although temporary discomfort may result if rubbed into the eye). > It also exhibits oxidation resistance, heat stability, very low vapor pressure and high flash points. > It is insoluble in organic liquid > It is non-greasy, non-rancidifying and virtually odorless. Uses: > Silicone oil is suitable for a variety of application and for a wide range of products and processes. > As a release material: It is used along or as part of a compounded formula and provides an odorless, non-carbonizing and non-toxic mould release for rubber, plastics & metal die castings. > As foam preventive: Extremely small amount of the fluid effectively control foam in many procession operations, especially in non-aqueous systems. > As a mechanical fluid: High viscosity, temperature characteristics, therms and chemical stability, shear breakdown resistance, compressibility make Silicone Oil perfect for mechanical/hydraulic uses. It is mainly used in hydraulic stabilizers, damping mediums. > As surface-active material: Added vinyl plastisols and liquid springs, it improves the flow characteristics, de-aerates and lubricates the surface of the completed part. > As a lubricant: The fluid provides excellent lubrication for plastic and elastomeric surfaces. The cosmetics and skin preparations: It is an important ingredient in hard creams, skin protecting suntan lotions and hair grooming aids as it forms a non-greasy, protective film which resists water and waterborne irritants, yet allows the skin to breath. > In polishes and chemical specialties: It is used in most automobile and furniture polishes for its high gloss with minimum rubbing and a durable water repellent film. It is also used in many other specialty formulations such as aerosol starches and fabrics conditioners. > In electrical/electronic equipments: It is widely used for both insulating and damping applications. > In food processing: Non-contaminating and non-adulterating, it is suited to many food processing applications.

• Type: Cutting Oil
• Usage/Application: Cutting Oil

• Brand Name: Brax
• Vehicle Type: Heavy Vehicle
• Packaging Type: Plastic Packet
• Grade: 68 AW
• ENGINE TYPE: Industrial lubricants
• Engine Oil Type: Hydraulic

• Color: White, Transparent
• Density: 0.80
• Viscosity : 2 Max

Mineral turpentine, also known as turpentine substitute, turps substitute, or just turps is an inexpensive petroleum-based replacement for the vegetable-based turpentine. It is commonly used as a paint thinner for thinning oil-based paint and cleaning brushes, and as an organic solvent in other applications. Mineral turpentine is a hydro treated light distillate of petroleum, and consists of a complex mixture of highly refined hydrocarbon distillates mainly in the C9-C16 range. The material is a colorless transparent liquid at room temperature. The liquid is highly volatile and the vapours are flammable. It can be a very dangerous inhalant.

• Brand Name: EROMOL-A

We offer eromol-a. Product similar to mto- mineral terpantine oil. application: paint & coating industries, thinner manufacturing industries, resin manufacturing industries, textile & paper processing industries. advantages: good drying rate, good solvent power, is silent on copper corrosion, copper corrosion 1 max, free from all foreign odor (contains only hydrocarbon odor). colour : water white sp. Gr. 30 deg c : 0.775 to 0.785 flash point : > 35 deg c aroamtic content : 20 % vv (typical) boiling range : 145 to 205 deg c

• Packaging Type: Drum
• Compressor Type: Rotary screw
• Usage/Application: SCREW COMPRESSOR

• Packaging Type: HDPE and Iron Drums
• Packaging Size: 200 kg
• Grade Standard: Pharma and Industrial Grade

Oil Cooled Voltage Stabilizer, Static Voltage Stabilizer, ONLINE UPS

Used Engine Oils

Mineral Hydrocarbon Oil, Virgin Base Oil, Reliance C9 Solvent