Industrial Pump Dealers in APMC Market, Ahmedabad

We are offering cat pumps, plunger pumps / piston pumps / centrifugal pumps / stainless steel pumps / flush pumps / liquid co2 pumps / teg pumps / high temperature pumps / nickel aluminum bronze pumps / direct drive pumps / belt drive pumps / gearbox pumps.

We introduces Heat Pump Water heaters for the first time in india. Using renewable energy heat sources from the ambient air to heat water, these heaters can provide hot water round the clock and throughout the year in an energy efficient and affordable way. Venus heatpump Water heaters are the right solution for Domestic hot water applications.   HOW DOES A HEAT PUMP WORK : Uses heat from the air to heat water and saves energy as much as 60-80%, when compared to oil fired boilers or electric water heaters. It is ideal for commercial applications like in hotels, hospitals, spas, hostels etc. where hot water is needed in large volumes. This range saves on operating costs by tapping into the heat in the air in a safe and affordable way. You can satisfy your customers while saving on your energy bills. Major components of a heat pump water heater include a compressor, a refrigerant, two heat exchangers ( a condenser and an evaporator) and an expansion valve. The operation begins with air being forced through an evaporator which contains a liquid refrigerant, with the help of a fan. This refrigerant evaporates to a gas and extracts heat from the ambient air. The warm gaseous refrigerant then passes through the compressor, which increases its pressure and it becomes a hot gas. This hot gas enters a heat exchanger (condenser) and transfers its heat to the water flowing from a storage tank. The refrigerant cools down in the condenser and becomes a warm liquid. It then passes through an expansion valve and becomes a cool liquid and enters the evaporator again. The cycle is then repeated in this manner. Thus heat absorbed from the air is transferred to the water and the heating continues till the desired temperature is reached.   ADVANTAGES OF A HEAT PUMP WATER HEATER Very low operating cost – 80% of an Electric Water Heater. Lower running cost than boilers (75% lower) or solar water heaters (25% lower). High energy efficiency – Coefficient of performance (ratio of output power to input power) can be as high as 4. Compact size and ease of installation. Can be installed in any convenient location. Continous hot water supply – Uninterrupted operation during night time, on rainy days and even on cold days.Works in any kind of weather and all seasons. Can be scaled to meet requirements from individual villas to large commercial installations. Reliable and durable – Can Last for Years with little or no maintenance. Simple Operation – Temperature and time options can be preset on the intelligent digital controller.

We are offering kitchen oil pumps. stylish pumps for oil extraction easy to handle and durable

We are instrumental in offering durable range of Pressure Booster System consisting of pumps, control panel and accumulator with packaged valves providing water throughout the system. This Pressure Booster System is either controlled by Pressure, Flow or Float Switch sensing. The pumps of Pressure Booster System can automatically run until the demand is fulfilled. It comprises of precise controls ensuring that operation of the pump is rotated to provide efficient usage. Our Pressure Booster System has the standby pump that is immediately activated to provide unremitting supply. Pressure Booster System offered by us consists of alarm providing timely alerts to the user with information regarding the status of both the booster sets and system. Features of Pressure Booster System Constant pressure is setPLC Controller to ensure maximum comfortEnergy saving pumpsMinimum Water WastageTimer function for different operationsIn set timings of individual pump, auto changes providedDigital indication for number of pumps, power consumed by pump, voltage taken pump, number of working hours of each pumpEfficientLow operation and maintenance cost Benefits of Pressure Booster System Power savingReduces pump̢۪s running timeRemoves Bulky Over Head TankDry-running protection facilityIn-built time relays ensuring constant & steady operation

• Power: 12 kw
• Power Source: Electric
• Motor Phase: Single Phase
• Brand Name: Keerthi
• Motor Horsepower: 0.1 - 1 HP

•   Power Range:   : 120W(LPD 90) & 300w (LPD 120)
•   Class of Insulation:   : “H”
•   Pumped Liquid Temperature:   : 2ºC+110ºC
•   Suitable  Fluids:   : cold & hot water
•   Cable Length:   : 1.5m.

HOME BOOSTER PUMP FEATURES Completely automatic No Leakage Silent Operation Plug & Pump long Lasting Quick to operate Excellent performance and  Economy Increased Comfort     APPLICATIONS   Suitable for boosting the water pressure   to hot & cold water for family use.   Boosting pressure of solar water   heater’s water supply.   IMPORTANT INSTRUCTIONS Read our Installation manual properly before using the pump. Pump should never be operated dry. The stress of weight of pipes should not be allowed to be taken by the pump.

Design: Horizontal, barrel type construction, multi-stage pumps with single suction closed impellers. Axial thrust is compensated by a balancing disc. Application: . For boiler feed water service, for main and auxiliary condensate extraction, for general water and fire-fighting systems Materials: Graded cast iron WCBCF8CF8M (SS-316)

We are the major supplier of raw water pump which are used widely in all the sectors. The raw water pump, which is driven by a belt on the engine, contains an impeller which makes the pump operate. It is usually fairly easy to access the impel r to inspect or replace it.

• Type: Brand New
• Application: in Dialysis machine
• Application: Hospital, Clinic
• Brand Name: Fresenius
• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: Ahmedabad
• Production Capacity: 50
• Delivery Time: 7 Days
• Packaging Details: Export worth Corrugated box Packing
• Minimum Order Quantity: 1 Piece
• Compatible with: Fresenius 4008/5008
• Model: 6751421

• Type: Vacuum Pumps
• Power: 3-5kw, 5-7kw
• Driven Type: Electric
• Pressure: High Pressure
• Warranty: 1yr
• Voltage: 220V, 380V
• Certfication: ISO 9001:2008
• Automation Grade: Automatic

We are the main supplier of this product.

• Country of Origin: Made in India
• Feature: Smoothly running friction free, Long lasting, Prevents splattering, Spilling , Issuing and wastage
• Brand Name: Bahuchar
• Material Grade: SS316/304

Our Mix 'R' type Pump is unique piece of engineering. High quality, CNC Machined, new generation metrology, ground to perfection. All Pumps are individually tested. One of the most popular parts used by Carpigiani users / distributors. This Complete 'R' type Pump comes with precise Gears, valves, springs & air regulation pipe. With the adjustable air regulating pipe, over-run can be adjusted from 40% to 85%. This helps getting maximum results out of various quality mixes. So competitively priced that everyone would want to change the worn pump who till date had only option to repair Pumps or do with the worn out pumps.Ideal investment as due to improved overrun, saving in mix is tremendous. Takes less then a season to recover this investment.Can be used on:Carpigiani - Coldelite - Promag - Cattabriga

We are a notable name in the domain offering the best in class and quality Jet Ejector & Liquid Ring Vacuum Pumps. We have hired expert warehousing personnel who keep a stringent check on the entire range of stored lot ensuring zero damage to the products till the final dispatch to the clients.

• Application: industrial
• Country of Origin: Made in India
• Head: Uptp 60mtr
• Speed: Upto 3500Rpm
• I Deal In: New Only
• Temperature: 60c

• Discharge Size Millimeter: DN 80 to 350 mm
• Fuel Tank Capacity: upto 2250 m3/hr
• Head: upto 80m
• Pressure: upto 22 bar
• Temperature: upto 140° C

We are offering centrifugal pumps.

We are offering submersible dewatering pumps for mud, sludge, slurry, sewage, waste water, clear water & all other industrial water application.

Specifications spray pump which generates pressure to spray the pesticides. Problem addressed: Spraying of agrochemicals in the field is a tedious and laborious task. The conventional knapsack sprayers available in the market require manual labor to operate, which is difficult to find due to movement of farm laborers toward cities. The small farmers cannot afford to buy the power operated sprayer or tractor-mounted sprayers available in the market, as these are very costly and are of not much use to small farmers due to small land holdings.     Product:  Mansukhbhai Jagani, a farmer cum artisan with a passion for mechanical innovations developed a bicycle operated sprayer, which is very efficient and affordable by the farmers. is an attachment, which essentially uses the circular motions of the cycle sprocket to move the piston of the spray pump which generates pressure to spray the pesticides. The front and rear sprockets of a thrown away bicycle are interchanged and the small sprocket is connected to the piston pump, so as the circular motion is converted to reciprocating motion of the piston and thus the pressure is generated and thus the pesticides are sprayed on the field       Technical specifications :  Span of use - approximately 3.5 feet from user (either side) Capacity of tank:  25 to 30 liter It can cover 4 acres area in 3 hrs  

Lobe Pumps are used in a variety of industries including, pulp, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.Rotary Lobe Pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.   Advantages: • Pass medium solids • No metal-to-metal contact • Superior CIP/SIP capabilities • Long term dry run (with lubrication to seals)• Non-Pulsating discharge

• Color: Blue
• Automation Grade: Manual
• Power Source: Battery
• Size: 4.6 kg
• Material: Plastic
• Pump Type: Double Pump
• Number of Nozzle: 3
• Capacity: 16 Liter

We are authorized distributor of A.O.Smiths Chanitex products, Pentair HRO membrane and pumps in all over India. We are also authorized distributor of DOW Filmtec domestic membrane in west and south region of India. We are in a position to supply water purification and water treatment plants, WTPSTPETP (domesticcommercial and industrial) and all the relevant components.

Constant Pressure Systems (AIM 081-1, AIM 082)   Constant Pressure Systems are meant for maintaining the pressure in the triaxial cell constant by automatically compensating for the fluctuation of cell pressure taking place as a result of volume change occurring in the cell due to expansion of the specimen under high pressure, entry of the loading plunger into the cell, consolidation of specimen, etc. Constant Pressure Systems are usually employed to ensure accurate performance of such types of Triaxial Shear tests (consolidated undrained test on clayey soils and drained test on most of the soils) where maintenance of the set pressure constant over a long period is essential.We supply a range of Constant Pressure Systems-Mercury water type, Oil water type and Air water type.   Application Constant Pressure Industry Chemical/Process Agricultural Civil Infrastructure Dams & Tunnels Geophysical/ Seismology Testing Geotechnical (soil/ rock) Testing Irrigation Mining Real Estate Roads, Highways & Bridges Education Architecture Building Technology Civil Department Geotechnical Mining Engineering Science Colleges Traffic & Transportation Railways Roads, Highways & Bridges

Manufacturer & Exporter of Dry Vaccum Pump & Dry Vacuum Pump. Our product range also comprises of Industrial Air Compressors, Vacuum Pumps and Pressure Air Compressors.We offer to our esteemed clients a wide variety of single and two stage dry vacuum pumps that cater to the needs of various industries.

• Color: Black
• Voltage: 15 - 24 VDC
• Model Name/Number: DP-125-73-2
• Power Source: Electric
• Usage/Application: Commercial
• Packaging Type: Box
• Brand: BNQS
• Current: 1.5 A

• Type: Impellers
• Material: Brass, Metal, Plastic, Stainless Steel
• Shape: Round
• Thickness: 10-20mm, 20-30mm, 30-40mm
• Weight: 1kg, 250gm, 2kg, 500gm
• Color: Golden, Grey, Light Brown, Silver
• Usage: Industrial Use
• Finishing: Non Polished, Polished
• Specialities: Anti Corrosive, Fine Finishing, Good Quality

APES line of engine driven trash pumps are designed for applications which requires high flow, efficiency and solid handling capability. These pumps are constructed of heavy-duty sand cast aluminium components featuring replaceable ductile iron impellers and steel wear plates. Simple front clean out design permits easy removable of trash and debris without disconnecting hoses. These pumps are built using broad selection of gasoline/diesel engines from the leading engine manufacturers with dependable worldwide service back up. All pumps are furnished with heavy duty steel roll cages, suction strainers, and 90-degree discharge elbows. Salient Features : Cast aluminum construction Pump includes heavy duty steel roll cage. 3", 4" & 6" NPT/BSP port sizes. Delivers up to 3800 LPM of water. Self-priming up to 7 meters depth. Engine options : Briggs & Stratton, Honda, Kirloskar, Lombardini. Available with 7 to 27 hp diesel / gasoline engine options. Solid handling capacity up to 3" diameter. Vitron / Silicon carbide mechanical seals. Two wheel trolley assembly standard on some models. Optional Equipment :Two wheel trolley assembly with tyres, Self start, Flood lamp. Applications:Industrial : Liquid transfer wash down, emergency standby, general sump pumping & cleanup operations are all easily handled with Aryan portable pumps. Construction : Open pits & quarries, cofferdams, sewers or general construction site dewatering, Aryan pumps handle tough jobs. Marine : Emptying bilges & holding tanks at docks & marinas, shipyard cleanup & wash down or general marine applications, the Aryan portables are dependable, economical performers. Municipal & Utilities : Residential & commercial cleanup operations, sewer & catch basin dewatering, emergency standby & general maintenance application, the Aryan portables have the versatility and performance you need to get the job done. High Capacity & Heavy duty de-watering pump. APES's another gem in the Pumps sector is the latest high power DeWatering pump Model AT6000. A monster that can discharge the water including sludge and other debris at 6000 LPM and from 3 mtrs deep. This Single stage, centrifugal solid handling pump is a life safer especially during heavy floods and other natural disasters and can dewater the area very quickly. Trolley mounted Diesel or Electric driven Auto Prime pump that can start operation even if suction hose is not submerged in the water. Specifications: Max. Discharge:               6000 LPM Max. Total Head:              15 Meter Max. Solid handling size:  75 mm Suction depth:                   3 meters Fuel Tank:                         200 ltrs Ground Clearance:           600mm Standard accessories : Following accessories are supplied along with each pump set. 6 inch size 3 meter PVC suction hose with male female coupling: 03 nos. 6 inch size flexible discharge hose with 15 meter each: 02 nos. Suction strainer  : 01 no

Used for specific gravity test by removing air voids from the Bitumen Mix. Very useful for other general laboratory tests where vacuum is required. General Descriptions And Specifications Complete with base, motor, pulley and belt. The pump mechanism is contained in a metal case with oil level and drain plug at base. Pump speed 450 RPM. Ultimate vacuum 0.01 mm/Hg. (Single stage). Complete with non-return valve, belt gauge and vacuum gauge with regulator. Displacement 50 Ltr./Min, Motor Rating : 0.25 HP Single Phase. To work on 230 V AC, 50 Hz. Single Phase. Supplied complete with filtering flask of 1000 / 2000 ml. Capacity with rubber cork and pressure pipe to carry out the test. Optional Accessories Air Ballast. Moisture Trap Hard Rubber Pipe of Required Length