Industrial Pump Dealers in Naroda, Ahmedabad

• Bore size min.: 4”(100mm) and above
• Power Range: 0.5 to 7.5 HP
• Voltage Range: 220V- 240V, AC Single phase , 50Hz 340V- 440V, AC Three phase , 50Hz
• Speed: 2880RPM
• Motor Type: Water filled water cooled Induction motor
• Coupling: Key / NEMA
• Head: Maximum 455 M
• Discharge: Maximum 30,000 LPH
• Liquid temperature: Maximum 35ºC
• Sand content in water: Maximum 50 PPM

These Vacuum Pumps remove gas molecules from the Vacuum Receiver ultimately providing ‘suction’ for the applications.   The atmospheric air in the closed vacuum receiver is drawn out into the suction manifold and discharged to the atmosphere by means of a Reciprocating Piston driven by a Crank Shaft. Built on the foundation of time-tested Reciprocating, Dry, Lubricated Piston type Technology, these Vacuum Pumps are designed for applications of Medical, Pharmaceutical, Laboratories, and similar industries. S.N. Model Displacement Motor LPM CFM m3/hr HP kW Maximum Vacuum: 736 mm, 29” of Hg, 981 mbar 1 VBJ - 2 481 17 28.9 2 1.5 2 VBJ - 3 878 31 52.7 3 2.2 3 VBJ - 5 1472 52 88.3 5 3.7 4 VBJ - 7.5 2492 88 149.5 7.5 5.5 5 VBJ – 10 3738 132 224.3 10 7.5   Standard Configurations: Base Frame Mounted or Receiver Mounted Standard Receiver Capacities: 150, 300, 500, 750 Liters  

We are offering v4 submersible pumpset with s.s. Pump and s.s. Motor.

M.O.C S.S. 316 AND C I 

We offer Medical Vacuum Systems with both - traditonal Reciprocating type vacuum pumps and the next generation Rotary Vane type Medical Vacuum Pumps. The reciprocating type vacuum pumps are generally suited for low flow medical suction applications and for smaller hospitals. These Reciprocating type Medical Vacuum Systems for hospitals comes with optional noise reducing enclosure for silent operation.

• Application: Domestic and Agricluture
• Application: Agricluture and Domestic

“Unnati Pumps” a leading Submersible Pumps and Submersible Motors manufacturing from India.We offer quality of Submersible Pumps and Motors from 3” to 10” with complete state of art technology at par with the best in the world. With more than 45 years of experience in the field of Submersible Pumps and Motors and exposure in Europe, Mid-East, and Africa. Submersible Motors are our flagship product. Our Present Range includes Submersible Motors and Pumps 1) 3" to 10" Bore Well Submersible Pumps in Gray Iron, Noryl (plastic) construction 2) Submersible borehole motors 3" to 4" (Oil filled and water filled rewindable motor) - Grey Iron & complete stainless steel- as per NEMA standard 3) Submersible borehole motors 6" to 10" (water filled rewindable motor) - Grey Iron & complete stainless steel- as per NEMA standard

• Voltage: 220 V
• Brand: Vishava
• Motor Horsepower: 2 HP
• Motor Phase: Single Phase
• Power Source: AC Powered
• Frequency: 50 Hz

These pumps can withstand voltage fluctuations from 180-240 volts. These have dynamically balanced rotating parts to ensure minimum vibrations. Cast iron impeller, delivery casing, these pumps are suitable for gardening and small farm irrigation, agriculture for clear water handling, water supply for agriculture, used in apartments, buildings and hotels. High speed monoblock pump, Flatter efficiency curves for efficient operation, Designed for automatic air release during priming.

Power Range 0.50 HP – 5.00 HP, Version 200 – 240V, A.C., 50Hz, 1Ph, Speed 2800rpm, Flow Rate 35-800 LPM, Total Head Range 5 mtr to 30 Mtr, Suction Size min. 25 mm to max. 65 mm, Method Of Starting Capacitor Start and Capacitor Run(CR) - 1Ph, Cable Connection Sheathed PVC insulated 3-core flat Cable having copper condu.

Lubi brand is a prominent centrifugal monoblock pump manufacturer based in india. They provide centrifugal monoblock pump 50z & centrifugal monoblock pump 60z at very reasonable prices.

Arvind Horizontal open well submersible pumps is well designed to work against wide voltage fluctuation. You select pumps as your requirement from its wide range of selection. Easy to install Pumps house is not required Priming is not required as motor is submerged in water . Noise free operation. Lesser electricity bills. Maintenance free operation.

We deals in supplying of wide range of pulsation dampener.

• Country of Origin: Made in India
• Brand Name: GSK
• Usage/Application: Agriculture and Pesticides
• Capacity: 20 liters

• Power (HP):: 0.5 HP to 5 HP
• Speed:: About 2800 rpm
• Discharge Range:: 20 LPM to 300 LPM
• Delivery Head Range:: 9 meters to 200 meters
• Delivery Pipe Size:: 1.25 “, 1.5 “ & 2”

NSP Pumps is a versatile, light weight multistage centrifugal pump designed for permanently immersed operation. The pump incorporates Noryl GFN2 technopolymer impellers and diffusers and diffuser with stainless steel jacket.   Submersible motor is a wet type, squirrel cage induction motor suitable for 220V single phase and 415V three phase supply. The stator is woudn with special water proof synthetic film insulated copper wire.

• Brand Name: Self Priming Barrel Pumps

Our organization has gained recognition as the affluent manufacturer, exporter and supplier of a high quality range of ss self priming pumps. The offered pumps are manufactured using high grade raw material and contemporary technology. We assure our clients that our offered products are quality-tested on predefined parameters, in order to ensure their conformity with the international standards of quality. special features: all witted parts are made up of investment casting so smooth finishing surface with smooth flow pass and with castings defects like blow holes and cracks self priming pumps are with regenerative centripetal type impeller for good suction capacity. low nsph is required quick suction and no foot valves are required suction capacity is 8 meters. also available in bare and mono block pump: flame proof mono block are also available economic, efficient & easy in maintenance moc: ss-304ss316ss316l seal :different types of seal are available as per liquids ,normally pumps are fitted with silcon carbidesilicon carbide with teflon parts. trolley mouted is available: able to handle temperature up to 80 c. Pump as customer requirement are also available. application: all liquids without solid suspensions like clear and non abrasives liquids, solvents,diesel, dm water, light chemicals, petroleum products etc. water treatment plants washing equipments boosting pressure system as barrel pump

We guarantee to deliver a flawless array of products to the clients and for this; we store the entire lot under safe conditions in our capacious and well-structured warehouse. We have hired experienced quality auditors who stringently check the raw materials against varied quality parameters before procurement. Thus, we ensure quality products at buyer's end. Features : Impressive power Noiseless functioning Energy-efficient

• Type: Submersible Pumps
• Application: Agriculture
• Color: MUlticolor
• Voltage: 440V
• Fuel: Electric
• Automatic Grade: Fully Automatic
• Pressure: High Pressure
• Structure: Multistage Pump
• Warrenty: 2 Years
• Country of Origin: India
• Brand Name: Pahal

• Capaicty: Up to 300 M3/hr
• Head: Up to 35 mtr
• Discharge Size: Dn 25 to 125 mm
• Temperature: Up to 50c
• Speed: Up to 2900 rpm

• Pressure: High Pressure
• Application: muddy water
• Application: Sewage
• Structure: Single-stage Pump
• Fuel: Other
• Theory: Centrifugal Pump
• Standard or Nonstandard: Standard
• Port: FOB NHAVA SHEVA
• Supply Ability: 100 Piece/Pieces per Month
• Model Number: AMTM Series
• Lead Time: 30 DAYS

• Head: 15-20 m
• Material: Stainless Steel
• Capacity: 70MTR
• Brand: HINDUSTAN
• Usage/Application: Industrial
• Max Flow Rate: 50MTR
• Motor Power: THREE PHASE

• Type: Pumps
• Usage: Water
• Weight: 100-150kg
• Color: Multi Colour
• Voltage: 220V
• Operating Type: Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw
• Driven Type: Electric
• Warranty: 1year

We are offering Centrifugal Pumps. Product features casing bonus casing thickness: class 150 pumps feature class 300 wall thickness as standard; increased reliability and maximized casing life. top centerline discharge for air handling, self-venting. back pull-out design for ease of maintenance. integral casing feet prevent pipe load misalignment maximized seal and bearing life. serrated flanges standard for positive sealing against leakage. Meets ansi b16.5 requirements.class 150 ff flanges standard, optional class 150 rf, 300 ffrf. fully open impeller acknowledged best design for cpi services solids handling, stringy material, corrosives, abrasives. Two times the wear area of closed type impellers for longer life. Back pump-out vanes reduce radial thrust loads and seal chamber pressure. sealing flexibility wide range of sealing arrangements available to meet service conditions. Engineered seal chambers improve lubrication and heat removal (cooling) of seal faces for extended seal life and pump uptime. positive sealing fully confined gasket at casing joint protects alignment fit from liquid, makes disassembly easier. ductile iron frame adapter material strength equal to carbon steel for safety and reliability. continuous performance original flow, pressure and efficiency are maintained by simple external adjustment resulting in long-term energy and repair parts savings. heavy duty shaft and bearings rigid shaft designed for minimum deflection at seal faces less than 0.002 in. (.05 mm). Bearings sized for 10-year average life under tough operating conditions. Available with or without shaft sleeve. extra large oil sump capacity increased oil capacity provides better heat transfer for reduced oil temperature. Bearings run cooler and last longer. rigid frame (and casing) feet

We have designed these horizontal Openwell submersible pumps set with very unique expertise by using latest manufacturing techniques. We have years of experience and we design all the products superiorly. We are known for its quality, reliability and excellence. Horizontal Openwell submersible pump set are manufactured under supervision of highly qualified team which inspect each of the product carefully. As these pumps are designed for underwater applications there is no need of priming and foot valve. Features: High op Longer life Noiseless operations Less maintenance required Smooth running Replaceable wearing parts Convenient to move Application: Irrigation Agriculture Farms Drip irrigation Gardens Bungalows Multistoried building sprinkler

• Head Range: Up to 45 Meter
• Capacity Range: Up to 2000 Ipm
• Sealing Arrangement: Mechanical Seal
• Operating Temperature: Up to 70° C
• Rating: 0.75 Kw to 15 Kw (2 Pole)
• Supply Sysytem: 3 Ø - 380 / 415 Volts - 50 / 60 Hz - A.C.
• Insulation: Class B / F
• Enclosure: Totally Enclosed Fan Cooled (TEFC)
• Rotor Type: Squirrel Cage Rotor (SCR)
• Operational Duty: S1
• MOC: Grey Cast Iron, Bronze, Stainless Steel SS 316/304
• Custom Built Design: Motors with different supply voltage and supply frequency can be offered on request.