Industrial Pump Dealers in Satellite, Ahmedabad

• Fuel Tank Capacity: More than 1.5 LTR
• Material: Metal, Plastic
• Weight: 1.4 Kg
• Type of Machine: Mini fogging
• Chemical Used: Thermo 55,Pyrethrine,king fog,Malathion
• Machine Fuel Type: Gas
• Number Of Knobs: Fogging
• Fuel Consumption: 500ml/3hrs of butane gas
• Flow Rate: 13 L/hr
• Operation Mode: Self start Gas assisted by electronic lighter
• Fuel Used: Butane Gas
• Spraying: Chemical+Diesel
• Particle Size: 5-30 Microns

• Country of Origin: India
• Type: Lubricating Oil Pumps
• Application: Industrial Use
• Weight: 10-20kg
• Condition: New
• Automatic Grade: Automatic
• Power: 1hp
• Power Source: Motor/Shaft driven
• Pressure: High Pressure
• Warranty: 1year
• Brand Name: Vertex
• Fuel: Oil

Being reputed distributors for CRI PUMPS, TEXMO PUMPS, TARO MOTORS and LUBI Motors Neel Enterprise is a trusted provider of more than 1200 varieties of water lifting pumps & Motors.to choose from Wide range of submersible pumps & motors in 3”, 4”, 6”, 8” & 10” available with different materials of construction Products with international quality certifications like ISI, CE,TSE, UR & UL 4500 variety of water pumps & Motors like Submersible Pump, Submersible Motor, Bare shaft Pump, End suction Pump, Pressure Booster Pump, Centrifugal Mon block Pump etc. 

"AQUA Pro" Pressure booster system provides excellent performance for pressure boosting in bungalow schemes apartment complexes, multi storey buildings, hotels, hospitals, industries, schools etc. "AQUA Pro" Hydro - pneumatic systems are economical to operate and are reliable & flexible, to guarantee comfort & performance. Ideal for pressure boosting without overhead tanks. Constant pressure at all taps. Low energy consumption. Wide range. Simple installation. Continuous water supply due to standby pumps. Low noise, tuff & reliable. Fully factory assembled & tested. Also available VFD controls for power saving solution. Benefits: Solves the problem in low pressure (Shortage in water pressure at the highest two floors): As a pressurized water supplying method, this system always ensures to maintain the sufficient water supply pressure up to the highest floor of the building. Protects the water in tank on the roof from contamination:: Since it is not necessary to equip the tank on the roof which should be used in the high reservoir system, the contamination of water tank can be avoided in principle. Reduces the construction cost and increase the efficiency in space utilization Since it is possible to eliminate the water tank on the roof, construction load and structural cost can be reduced. On the other hand, the available space in the building can be maximized, and furthermore, the cost in piping work can be reduced due to upward piping method Reduces the cost of electric power and ensures the minimized space for installation. The cost of electric power can be reduced by more than 30% compared with that of existing electric power. Ensures the easy installation work due to the minimized installation space and shortened construction period. Features: Constant Pressure: Keep the constant water pressure as using each inverter to all pump Auto Re-start: Automatically re-start with the former operation data when the power returned. Lead pump shift: Rotate the lead pump according to the set time of lead pump. Faulty pump skip: Automatically skip a faulty pump and keep operating the system regularly. Dry running prevention: Prevent the void turning by water shortage sensor. Alarm display: Display the alarms, Over current, Water shortage, High pressure, Low pressure & Transmiter faulty. Freezing Prevention (Option): Automatically operate the system if pumps does not operate below zero temperature for 2 minutes. Fix prevent: Prevent the fixing pump in case of the pump does not operate for long period. Operating data save: Display & save the operation data & alarm list in detailed (timely/Daily/Monthly/Yearly)

Pressure to 40bar (600psi) Vacuum to -950mbar Oversized check valve Contoured cushioned handles Protective caging for vent valve Hose, fittings, & carry case supplied Optional digital gauges

Compared with gas, electric and solar water heaters, air source heat pump can provide all-weather hot water with low energy cost. Together with Shanghai Jiao Tong University and other research institutions, Linuo Paradigma has developed a series of heat pump products for both residential and commercial applications and manufactured by the new established production line in Qingpu industrial park, Shanghai, China. All those products adopt world-leading Copeland compressor and high-efficiency heat exchanger, and are manufactured by ISO9001 facilities with strict performance test before ex-factory. The 4.0 COP (Coefficient of performance) of our heat pump system means the operation cost is only 1/4, 1/3 and 2/3 of the electric, gas and solar water heaters’. Besides economical efficiency, heat pump system also has advantages on safety issues since avoiding of electric leakage, heat without water, gas explosion and carbon monoxide poisoning. The air source could be used in 24 hours/day and all weather conditions, which creates air source heat pump the new generation of green energy water heaters.

Design: Vertical suspended pumps with closed and open impellers, for wet pit or dry pit applications, wear resistant design, overhung impellers upto 2 metres submersion depth, intermediate bush bearing support for submersion depth over 2 metres. Self-priming, simple mounting. Application: . Recommended where space economy matters . Vertical pumps are reliable alternatives to horizontal pumps . Suitable for clear liquids, acids, alkalis, hydrocarbons, slurries, waste water, sugar melts, detergents etc

The screw pump is used in a sludge digester to keep the sludge in a thoroughly intermixed condition.

• Brand Name: Sumo
• Voltage: 415 V
• Motor Horsepower: 1 - 3 HP
• Motor Phase: Three Phase
• Power Source: AC Powered
• Frequency: 50-60 Hz

We are the major supplier of raw water pump which are used widely in all the sectors. The raw water pump, which is driven by a belt on the engine, contains an impeller which makes the pump operate. It is usually fairly easy to access the impel r to inspect or replace it.

With us, buyers can stay completely assured for top-notch products as we make use of the premium material and modern work methods for preparing them. Besides, the material is sourced from the genuine places. Our packaging materials can retain the products' quality and newness even under extreme shipping and handling conditions. Our packaging provides optimum physical protection.

• Type: Electric
• Usage/Application: Agriculture, Domestic
• Motor Horsepower: Less than 1 HP
• Motor Phase: Single Phase

• Pressure: 150 Bar
• Motor Speed: 1450 RPM
• Motor Horsepower: 30 HP
• Max Flow Rate: 70 lpm
• Brand: Hawk
• Usage/Application: Hydro Test

Lobe Pumps are used in a variety of industries including, pulp, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.Rotary Lobe Pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.   How Lobe Pumps Work: Lobe Pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timing gears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out of the pumped liquid, pressure is limited by bearing location and shaft deflection. 1. As the lobes come out of mesh, they create expanding volume on the inlet side of the pump. Liquid flows into the cavity and is trapped by the lobes as they rotate. 2. Liquid travels around the interior of the casing in the pockets between the lobes and the casing -- it does not pass between the lobes. 3. Finally, the meshing of the lobes forces liquid through the outlet port under pressure. Lobe Pumps are frequently used in food applications because they handle solids without damaging the product. Particle size pumped can be much larger in Lobe Pumps than in other PD types. Since the lobes do not make contact, and clearances are not as close as in other PD pumps, this design handles low viscosity liquids with diminished performance. Loading characteristics are not as good as other designs, and suction ability is low. High-viscosity liquids require reduced speeds to achieve satisfactory performance. Reductions of 25% of rated speed and lower are common with high-viscosity liquids.   Advantages: • Pass medium solids • No metal-to-metal contact • Superior CIP/SIP capabilities • Long term dry run (with lubrication to seals)• Non-Pulsating discharge

To manage mosquitoes the way you want to. And you can do it yourself, It helps you manage Mosquito menace, Handy Fogging Machine is most effective for small areas like poultry farmers, bungalows, party lawns housing societies, farm houses schools, etc. Covers small areas effectively Weight just 1.5 kg Use LP-Gas as burner fuel. Noiseless operation. Reliable hand pump for fog output 24 x 7 Spares & after sales Service Coil cleaning system.

• Model: CRM40T
• CAPACITY, L/HR.: 10-40
• NO. OF PUMPS: 3 Nos.
• EACH HOPPER CAPACITY LITER: 8 Liter
• NO. OF HOPPER: 3 Nos.
• ELECTRIC SUPPLY: 220V, 50HZ, 1PH
• OVERALL DIMENSIONS: 450 mm (L) x 740 mm (W) x 1310 mm (H)

  RIPPLE PUMP MACHINE FEATURES S.S. 304 Self Supporting Frame & acrelic hopper cover. All Contact Parts Of S.S. 304. Complete With Internal Piping and By Pass Arrangement. Complete With Pneumatic Cylinders And Accessories. Easy movable pedal wheel with lock for machine sifting. Inbuilt stand for air compressor. Individual on-off Switch with indicating lamp & Regulator for speed regulating.

We are authorized distributor of A.O.Smiths Chanitex products, Pentair HRO membrane and pumps in all over India. We are also authorized distributor of DOW Filmtec domestic membrane in west and south region of India. We are in a position to supply water purification and water treatment plants, WTPSTPETP (domesticcommercial and industrial) and all the relevant components.

• Type: Impellers
• Material: Brass, Metal, Plastic, Stainless Steel
• Shape: Round
• Thickness: 10-20mm, 20-30mm, 30-40mm
• Weight: 1kg, 250gm, 2kg, 500gm
• Color: Golden, Grey, Light Brown, Silver
• Usage: Industrial Use
• Finishing: Non Polished, Polished
• Specialities: Anti Corrosive, Fine Finishing, Good Quality

• Type: Brand New
• Application: in Dialysis machine
• Application: Hospital, Clinic
• Brand Name: Fresenius
• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: Ahmedabad
• Production Capacity: 50
• Delivery Time: 7 Days
• Packaging Details: Export worth Corrugated box Packing
• Minimum Order Quantity: 1 Piece
• Compatible with: Fresenius 4008/5008
• Model: 6751421

pesticide sprayers, Agriculture Equipment, Knapsack Power Sprayer

• Material: Mild Steel
• Machine Type: Pneumatic

• Color: Black
• Voltage: 15 - 24 VDC
• Model Name/Number: DP-125-73-2
• Power Source: Electric
• Usage/Application: Commercial
• Packaging Type: Box
• Brand: BNQS
• Current: 1.5 A

Specifications spray pump which generates pressure to spray the pesticides. Problem addressed: Spraying of agrochemicals in the field is a tedious and laborious task. The conventional knapsack sprayers available in the market require manual labor to operate, which is difficult to find due to movement of farm laborers toward cities. The small farmers cannot afford to buy the power operated sprayer or tractor-mounted sprayers available in the market, as these are very costly and are of not much use to small farmers due to small land holdings.     Product:  Mansukhbhai Jagani, a farmer cum artisan with a passion for mechanical innovations developed a bicycle operated sprayer, which is very efficient and affordable by the farmers. is an attachment, which essentially uses the circular motions of the cycle sprocket to move the piston of the spray pump which generates pressure to spray the pesticides. The front and rear sprockets of a thrown away bicycle are interchanged and the small sprocket is connected to the piston pump, so as the circular motion is converted to reciprocating motion of the piston and thus the pressure is generated and thus the pesticides are sprayed on the field       Technical specifications :  Span of use - approximately 3.5 feet from user (either side) Capacity of tank:  25 to 30 liter It can cover 4 acres area in 3 hrs  

  Ink Circulation Magnetic Roller Specification: Dia: 37 - 50 mm Length:250 - 3000 mm • Avoid motting, Manual stirring of Ink • Shed Variation, Instant & Uniform• Mixing of Solvant During printing Specification: Dia: 50 mm Length:500 - 1500 mm • No Fiber Generated• No Ink Clustered• No Spiraled Line• Long Life & Easy to renewed  Pneumatic Pumps Applications pneumatic SK/SS Pumps are of the most versatile pumps on the market. They can be used in a variety of installation in numerous applications. Thanks to the simple operating principle. with a compact and reliable design, diaphragm pumps meet the demands of printing, painting,water treatment & chemical industries. Today lots of unique- designed pneumatic pumps are sufficiently applied to rotogravure/ flexo printing presses and coating/ laminating machine with or without chamber doctor blade systems. Working Principle Air-operated double diaphragm pumps utilize a pressure different in the air chambers to alternately create sucation and positive fluid pressure in the fluid chamber. Ball checks is insure a positive flow of fluid cycling will begin as air pressure is applied and it will continue to pumps and keep up with the demand. it will build and maintain line pressure and will stop cycling once maximum line pressure is reached. (dispensing device closed) and will resume pumping as needed.

Hydraulic Pump Parts, Hydraulic Seal Kits, Rod Seals, Wiper Seals

Pressure Booster Pumps, Heat Pumps, Industrial Water Chiller, Water Heater

single stage dry vacuum pumps

mechanical pumps, Mechanical Products, Mechanical Valves