Industrial Valve Dealers in Mithakhali, Ahmedabad

ApplicationsClear water having turbidity upto 5000 ppm and temp up to 45 degree C Other fluids with maximum pressure / temp.conditions not beyond the scope of IS-780/IS 2906FeaturesCombination of excellent design features of reputed overseas valve brands Rigid and sturdy design with minimum loss of head across the valveUse of special purpose machines resulting in:Perfect interchangeability of components.Assured parallelism between side flanges.Assured equal taper on both sided of the wedge.Perfect machining and pressing of body and wedge face rings. Excellent finish on spindle threads resulting in low friction and smoother operation of valves.Long service life and leak tightness even after thousands of open/close cycles. 

• Specialities: Heat Resistance, Non Breakable

Non Return Valve is especially manufactured to prevent reversal of flow in fluid piping systems. We are enlisted among the reputed Suppliers of Non Return Valve from Gujarat, India. The Non Return Valve  that we offer is gaining high popularity among customers due to its automatic operations. This valve is opened by the flow of fluid in the forward direction and is closed by back pressure of the fluid or by the weight of the closing mechanism or by a spring force.

Dual plate check valves is most suitable foe water pumps, chemicals pupms and oil gas applications. Body of DPCV are CI, CS, SS304, SS 316 or any specific materials with the Disc of same materials as well as other materials.Dual plate NRV is soft seated with Nitrile,Neoprene,Silicon ,Viton etc.It is suitable for vaccum application.We have sizes from 50 mm to 900 mm.

We are a global market leader in the field of manufacturing and supplying of Rotolok Rotary Valves. These rotary airlock valves basically performs the function of regulating the flow of products that are in powdered or granular form, from one chamber to another while maintaining a proper airlock condition. These rotary airlock valves are an essential part of the set up in industrial processes that deal with dry products. We are providing these rotary airlock valves at an affordable rate to our customers.

• Type: Auto Drain Valves
• Color: Grey
• Condition: New
• Pressure: 0 - 40 Bar
• Name: TEC-44

motorised drain valve tec-44 remove heavily contaminated condensate suits compressed air pressure upto 40 bars powerful, motorized rotation makes it impossible to block.

• Material: Stainless Steel
• Color: Silver
• Power: 30lg
• Pressure: Medium
• Type: Stainless Steel Ball Valve
• Country of Origin: India
• Connector Type: Flanged
• Condition: New
• Packaging Type: Box
• Weight: 5-10kg
• End Connection: Flanged

• Media: Water
• Material: Cast Iron
• Brand Name: Radiant Flow
• Automation Grade: Manual

• Material: Stainless Steel
• Size: 1/2" to 24" Flanged ends/Butt weld ends
• Brand Name: Suraj Steelmet
• Grade: CF3,CF3M,CF8,CF8C,CF8M,CD4MCU,CW12MV,AI BRONZE
• Operating Mode: Auto
• Standard: API 6D / BS 1868
• Type of End Connection: Bolted Cover, Swing Type Disc

The Multiport Valve offered by us is fabricated using quality material and hard ceramics for effective functions and enhanced service life. Our Multiport Valve is widely appreciated for its innovative design, easy handling and excellent seal capability for preventing internal leakage. Multiport Valve offered by us find applications in various industries. Why Our Multiport Valve? Excellent durabilityOptimum qualityHigh performanceResistance to corrosionSturdy constructionEasy & safe to use

Need control valve .nc valve for size:-38*38 &38*12 and long sinddle ,hevy noab used the valve highy pressor valve.

• Type: Automatic
• Pressure: Upto 64kg/cm2
• Rating: 10 Mesh to 200 Mesh
• Material: Steel
• Warranty: 1 Year
• Condition: New

• Plain and Threaded in: 15mm, 20mm, 25mm, 32mm, 40mm
• different colors: 50mm, 65mm, 80mm, 100mm

UPVC ball valve available in many size & colours. Available threaded ball valve and socket ball valve. Used PVC Pipe and fitting for Drainage water supply. It can handle high pressure and made up of virgine PVC resin.

Pneumatically Actuator operated Ball valves with FRL Unit(Filter, Regulator, Lubricator) with necessary Solenoid valves for Slurry Inlet, Cake Airing, Cake Washing, close filtrate Outlet, Air Purging (core blowing inlet / outlet] all operated in a programmed sequence as required during the operation logically controlled by PLC.  

Cast Iron Rubber Lined Diaphragm Valve

• Material: CPVC and Stainless Steel
• Country of Origin: India
• Brand: Ashirvad
• Usage/Application: Bathroom Fittings
• Finish: Polished
• Packaging Type: Box
• Media: Water
• Length: 5-10mtr., 10-15mtr.
• Usage/Application: Industrial
• Speciality: Crack Free, High Tensile Strength, High Ductility

• Brand Name: Elgi
• Color: Grey, Black etc
• Media: Air
• Compressor Type: Screw Compressor
• Air Compressor Power: 10 to 120 HP
• MOC: Brass, PVC
• Valve Type: Solenoid valve
• Pressure: 4 to 18 Bar

We are offering oswal check valves are heavy duty, bolted cover, renewable seat ring, and body mounted disc swing type. Valves are straight through flow which works automatically. They are opened by the force of velocity pressure and closed by the force of gravity and back pressure. The valves are single direction flow and restrains flow in opposite direction. Distortion, wear and noisy operation of the valve can be avoided by selecting the size of the valve on the basis of flow conditions. Swing check valves are best suited for moderate velocity operations. Swing check valves are normally designed for horizontal installations. It can be installed in vertical direction with flow in upward under the disc. There is no tendency for seat to gall because the disc meets flat surface without rubbing upon contact. The most advanced design features provides the ultimate in dependable, economic flow control. They are available in wide range of sizes and weights. Flow directions are marked as cast on the body for ease of installation. Swing check valves are adequate for all service media. Valves can also be supplied with counter weights and dash pot arrangement depending upon the condition and request.

AMTECH™ Lift up Non Return Valve in common with all Non Return Valve, are used to prevent back flow in the line, and operate automatically, according to increases or decreases in line pressures. Flow through a Lift up Non Return Valve is the same as a globe valve. The disc raises up off of the seat as pressure below the disc increases, while a drop in pressure on the inlet side and a build up of pressure on the outlet side causes the valve to close. Back pressure in the line holds the disc in the closed position.   Specification

• Application: Industrial and Mobile
• Theory: Vane Hydraulic Pump
• Lead Time: 1 WEEK.
• Port: AHMEDABAD, MUMBAI, KANDLA, MUNDRA
• Model Number: T6C, T6D, T6E
• Structure: Vane Pump
• Packaging Details: EXPORT QUALITY PACKAGING IN CORUGATED OR WOODEN BOXES
• Usage: Oil
• Place of Origin: Andhra Pradesh, India
• Standard or Nonstandard: Standard
• NA: NA

SIZE : 50 MM to 600 MM. (|) Pressure Ratings : PN10, PN16, and PN 20. (|) Material of Construction : Cast Iron, SG Iron, Aluminium, CF8, CF8M. (|) Disc Material : Cast Iron, SG Iron, Aluminimum Bronze, CF8, CF8M. (|) Body Lining : Nitrile, EPDM, Hypalon, Viton. (|) Body Style : Wafer Flanged less, Wafer lugged, Flanged. (|) Application : Oils, Fuels, Water, Air, Gases, Brines, Sea Water, Estuary Water, Steam, Powder, Slurries, Aqueous Slurries, Alcohols, Dilute Alkalies, Animal and Vegetables Oils, Dilutes Acids, Weak Alkalis, Hydrocarbons & Solutions, Food, Dairy, Pharma & HVAC systems. (|) Operation : Lever, Gear, AND Actuator operated (Pneumatic, Hydraulic or Electric Actuators).

Process industries especially beverages, chemical and pharmaceutical industries that execute principal manufacturing functions require high quality and optimally operating butterfly valvesfor controlling the flow of fluids.   We are the highly preferred Butterfly Valve Manufacturer and offer huge range of various models of this valve and also custom-make them as per the demands of the clients. Our modern technology based valves are made in obedience to the industrial norms and have numerous application features and need simple & low-cost maintenance in addition to high dependability factor. They can endure the harsh and corrosive environment of the industries very durably. Moreover, despite of their excellent quality they are very reasonably priced.

We are reputable manufacturers, suppliers and exporters of Spare Pinch Valves Sleeves. These products are fabricated by our experienced team of professionals using qualitative raw-material and contemporary technologies incompliance with the industrial norms. Because of their outstanding features such as abrasion resistance, corrosion resistance, simple maintenance and easy replacement, our pinch valve sleeves are well commended by our customers. As we are the foremost Pinch Valve Supplier in India, we also have a good market for their spares. We offer our products at market leading price rates.

We are offering mvs knife edge gate valves are specially designed for tough applications. Mvs knife gate valves features a single piece full port cast stainless steel fully lugged body which is very robust in construction to cater to the extreme demanding applications and ensure greater flow capacity and minimal pressure drop. Mvs knife edge gate valves incorporate gates made of stainless steel and other superior alloys are ground with super surface finish on both sides to assure positive shutoff. The machined and highly finished gland pockets ensure a leak proof gland packing and perfect stem seal. Mvs high performance knife edge gate valves are available in uni-directional bi-directional design which provide better value and performance with many standard features which others lack.

Pressure reducing & surge control valve automatically reduces a higher inlet pressure to a steady lower downstream pressure regardless of flow rate and inlet pressure fluctuations. Pilot valve enables the main valve to close quickly to prevent downstream surges.