Industrial Valve Dealers in Sarkhej, Ahmedabad

• CAST STEEL: STAINLESS STEEL

We offer gate valves are primarily designed to start or stop flow, and when a straight line flow of fluid and minimum flow restriction are needed. In service, these valves generally are either fully open or fully closed. The gate (also called wedge) of a gate valve is completely removed when the valve is fully open; the wedge is fully drawn up into the valve bonnet. This leaves an opening for flow through the valve at the same inside diameter as the pipe system in which the valve is installed. A gate valve can be used for a wide range of liquids and provides a tight seal when closed. advantages of using gate valves: good shutoff features gate valves are bidirectional and therefore they can be used in two directions pressure loss through the valve is minimal.

• Material: SCS 13
• Application: Waster Treatment Plants, Steel Plants
• Size: 4 Inch
• Suitable medium: Steam, Water
• Temperature range: 29 Degree Celsius- 125 Degree Celsius
• Condition: New

• Brand Name: Marck / Fu-Tech
• Material: Alloy Steel, Carbon Steel, Forged Steel, Stainless Steel, cast iron
• Color: Black, Brown, Grey
• Condition: New
• Pressure: High, Low, Medium
• Application: Gas Fitting, Oil Fitting, Water Fitting, power plant
• Size: 100-150mm, 150-200mm, 200-250mm, 250-300mm, 300-350mm, 350-400mm, 450-500mm, 50-100mm

HELLO SIR,

• Material: Brass/Bronze
• Media: Air, Water, Fuel
• Temperature Of Media: High Temperature

• Brand Name: SPAC

We are the leading manufacturers, exporters and supplier of this products.

• Material: Brass, Cast Iron
• Size: 15 to 300 mm
• Type: Flow Control Valve
• Pressure: 50-200 Bar
• Temperature: 180 Degree C
• Media: Gas

• Brand Name: Protector
• Material: ABC and gun metal
• Code: 5294
• Features: It is for replacement parts

• Material: Aluminium, Brass, Carbon Steeel, Carbon Steel, Cast Iron, Cast Steel, Gun Metal, Metal, Rubber, Stainless Steel
• Usage: Air Fitting, Gas Fitting, Oil Fitting, Water Fitting
• Color: Blue, Red, Sky Blue, White
• Valve Size: 0.1mm-5cm, 2cm-50cm, 51cm-60cm, 6cm-20cm
• Number Of Way: 2way, 3way, 4way
• Certification: ISI Certified, ISO 9001:2008 Certified
• Pattern: Plain
• Power: Hydraulic, Manual, Solenoid
• Temperature Pressure: High, Low, Medium
• Structure: Double Half Shaft, Pinless, U Section
• Specialities: Blow-Out-Proof, Casting Approved, Durable, Heat Resistance, Investment Casting, Non Breakable
• Technic: Gear Operated

• Manufacturing Standard: BS 5163 / IS14846
• Size Range: 32 to 1500mm
• Pressure Ratings: PN10, PN16

These valves are available in non rising as well as rising spindle type suitable for clear water up to 450 C. These valves are designed with total compliance with applicable design and testing standards. All designs are validated for stress analysis. Sluice valves find wide application in water works, water/effluent/sewage treatment plants. These valves are available in non rising as well as rising spindle type suitable for clear water up to 450 C. These valves are designed with total compliance with applicable design and testing standards. All designs are validated for stress analysis. Sluice valves find wide application in water works, water/effluent/sewage treatment plants. FEATURES Rigid and sturdy design Low pressure loss across the valve Suitable for clear water up to 45 C and 5000 ppm turbidity, other fluids with maximum pressure / temperature conditions within the scope of IS:14846 Long service life and leak-tightness even after thousands of open / close cycles APPLICATIONS Water works Water / Effluent / Sewage treatment plants Fire Fighting Power

  Technical Details  Pressure range: 0.2-0.7 MPa Size range: 1/8 inch Metering range : 0.3-100 ml   Applications  Discharges preset amount of grease or adhesives by single acting trigger or pneumatic 3 port valve   Key Features  Can be operated manually or automatically Material of construction: pump casing - stainless steel

• Model No.                 : NPE6OF
• Type                           : Filter
• Mode of Operation    : Automatic
• Water Capacity           : 4000Lph
• Size of Inlet               : 1"F
• Size of Outlet              : 1"F
• Size of Drain               : 1"F
• T Er B Stainer Size      : 3/4"
• Size of Base                 : 2.5" - 8 NPSM
• Size of Riser Pipe         : 1.05" OD

• Feature: Rigid design, Non-corrosive, Durability.

• Application: JCB
• Size: 1/2 Inch ,1/4 Inch
• Material: MS
• Features: Corrosion Resistance
• Finishing: Chrome Finish
• Hardness: 20-40 HRC

Flow Control Valve: Is designed for Promask Combi (Full Face Mask) or Auto Mask CA The belt mounted control valve enables to adjust the air flow to ensure optimum comfort. Constant airflow from 120 l/min to 300 l/min