Industrial Wires Dealers in Odhav, Ahmedabad

Our clients are offered with a wide range of Fiber Glass Copper Cables that are offered at market leading prices. These have excellent heat insulation properties and are best suitable in A.C & D.C applications, transformers, coke ovens, generators, insulation motors, blast furnaces, boilers, ships, nuclear and thermal power stations. COLOURS : Red, Yellow,Blue,Green,Black,Natural/White Packing : In reels of 100 Metres each.

• Material: Fibreglass
• Length: Upto 100m
• Packaging Type: Roll
• No of Core: Single Core
• Heating Capacity: 500 Degree Celsius

• Standard Sizes: 12 Core x 0.50 Sq mm, 12 Core x 0.75 Sq mm

We supply premium quality Round Traveling Cables for Elevator Wiring. Standard Sizes: 12 Core x 0.50 Sq mm, 12 Core x 0.75 Sq mm Apart from above sizes, we can manufacture and supply as per customer requirement.

PVC Insulated Aluminum Cable, Elevator Cable, Flat Elevator Cable

• Color: White
• Length: 30 m
• Material: PVC
• Country of Origin: Made in India
• Cable Type: 3 Plus 1

We have facility to manufacture Water Cooled Cable suitable for any induction melting /heating equipment as per our standard or customized design. We are using electrolatic grade copper rope to get maximum conductivity, which ultimately reduce lot in terms of power consumption. Hose pipe being used is non conductive rubber and covered by fire retardant thermal insulated cloth. All end terminal are made to meet your requirement.We can also provide different type of brass and copper end terminals, carbon free rubber hose.

• Voltage: 220 V / 380 V / 415 V
• Type: Induction Furnace
• Conductor Material: Copper
• Brand Name: Balaji Engineers
• Product type: Water Cooled Cable
• Usage: In induction melting furnaces

Ptfe Thermocouple Wires, Cable Ties, polyurethane wire, Heater wire

Silicone Rubber Insulated Cable, Temperature Sensor, ptfe cable

silicon rubber cable, Wires, Cable, pvc flexible cable

• Material: Tin Copper
• Type: Double Insulated Cable
• Voltage: 1600V DC
• Packaging Type: Roll
• Insulation Material: LSZH (Halogen Free thermo set Compound)
• Temperature Range: 120 Degree Centrigrade
• Ideal For: Solar Panel
• Conductor Material: Multi Stranded Class 5 EN 60228
• Number Of Core: 1C
• Size: 4 Sqmm

  Armoured / Un-Armoured Power & Control Cables DP DEELUX POWERCAB is manufacturer of  a wide range of Armoured Cables, Armoured Power Cables, Armoured Electrical Cables, PVC Armoured Cables and XLPE Armoured Cables. XLPE means cross-linked polyethylene or vulcanized polyethylene. The basic material is low density polyethylene. Polyethylene is a thermoplastic material consisting of long chain of hydrocarbon molecules. At elevated temperatures these molecules tend to move relative to one another so that the material becomes increasingly deformable and will eventually melt at the temperature around 110°C. The process of rubber the polyethylene molecules can be cross-linked. The process of cross-linking or vulcanization consists of producing chemical bonds at interval between the long molecular chain to give a ladder effect which prevents slippage between molecules as a result of cross-linking the material becomes heat resistant and does not soften at higher temperatures. Further it has better resistance to stress cracking and good resistance to ageing in hot air. With the change of structure there is no adverse effect on electrical properties. CONDUCTOR The most acceptable metals are copper and Aluminium due to their higher conductivity & ductility.As Copper has got higher affinity for sulphur, it corrodes in the atmosphere where sulphur fumes are present. In these conditions tinned copper should be used. Aluminium oxide film which is always present on aluminum conductor surface acts as barrier and it protects the Aluminum conductor from corrosion in fumes laden atmosphere. CONDUCTOR CONSTRUCTION The most economical construction for conductor is solid conductor i.e. conductor made of one single wire. As the area conductor increases, solid conductor becomes stiffer and hence difficult to handle in this case stranded construction is adopted. Here the conductor is made of number of strands. This construction provides more flexibility. Where crimping of lugs is required, the conductor has to be of stranded construction only. To economies in insulating material, weight and overall diameter, shaped conductors are employed in bigger sized cables. Here the stranded conductor is shaped in to a segment of a circle so that when all the cores are laid, they form a complete circle. These segments are identified as 2 Core- 180 degrees, 3 Core- 120 degrees, 4 Core- 90 degrees, 3.5 Core- 100/60 degrees. I.S.1554 permits solid conductor construction up to 10 sq.mm in aluminium and up to 6 sq.mm in copper. It permits the use of shaped conductors for size from 16sq.mm onwards. INSULATION The PVC covering over conductor is called insulation and is provided by extrusion process only. The insulated conductor is called core.I.S.:1554 permits two types of PVC insulation as follows: 1)Insulation with type A PVC Compound as per IS: 5831 which is suitable for 70°C continuous operation. 2) Insulation with type C PVC Compound as per IS: 5831 which is suitable for 85°C continuous operation. LAYING UP The cores are laid up with suitable lay. The final layer always has a right hand lay i.e. if you look along the cable, the cores move to your right hand. INNER SHEATH Inner sheath is provided over the laid up cores. It is provided to give circular shape to the cable and it provides bedding for the armouring. I.S. 1554 permits following two methods of applying the inner sheath of any thermoplastic material i.e. PVC, Polyethylene, etc. EXTRUDED INNER SHEATH:Here the inner sheath is provided by extrusion of Thermoplastic over the laid up cores. This type of Innersheath is generally provided in cables having round cores i.e. in control cables and power cables upto 10 sq.mm sizes. This type of the inner sheath also acts as a water barrier between cores and outer sheath. Is case of a puncture in the outer sheath the water cannot reach to the cores and hence we recommend that cables for outdoor underground uses should have extruded inner sheath. TAPPED INNER SHEATH:Here the inner sheath is provided by wrapping a thermoplastic tape over the laid up cores. It is generally employed in cables having sector shaped cored i.e. multi core cables of 16sq.mm and above. This method saves a process and hence manufactures always provide this type of inner sheath unless the purchase specifications ask for extruded inner sheath. ARMOURING In case of armoured cables, generally galvanized steel wire / strip is provided over the inner sheath is multi core cables and Aluminium Round wire or Aluminium strip over the insulation in single core cables. It provides mechanical protection inside cores and it carries earth return current in case of short circuit of a core with armour. As per I.S. 1554 (Part-1) 1988, round wire armouring is provided in cable, where calculated diameter under armour is up to 13 mm. Above this the armouring is either with round wire or strip of size 4 mm 0.80 mm. As strip construction is economical, the manufactures always provide steel strip armouring unless wire armouring is specially specified. In long run of cables and in case of mines, round wire armouring is must, as strip construction provide higher resistance to earth fault current and sometimes this current may not be sufficient to operate the circuit breaker in case of earth fault. In mines, the resistance of the armour in no case should exceed the resistance of the main core by more than 33% for safety reasons. To achieve this, sometimes tinned hard drawn copper wires are required to be used along with galvanized steel wires. Sometimes two layers of Round steel wire or Steel Strip are applied in opposite direction with barrier tape in between are provided to give extra protection. In case of single core for use in AC circuits, the material for armouring has to be nonmagnetic, as in this case the return current is not passing through the same cable and hence it will not cancel the magnetic lines produced by the current. These magnetic lines which are oscillating in case of AC current will give rise to eddy current in magnetic armouring and hence armouring will become hot, and this may lead to the failure of the cable. Generally hard drawn aluminium wires / strip are used for armouring in this case. OUTER SHEATH The PVC covering the armouring in case of armoured cables and over the inner sheath in case of un-armoured cables is called outer sheath. I.S. 1554 specifies nominal and minimum thickness of outer sheath for UN –armoured cables and only minimum thickness of outer sheath for armoured cables. It permits the following types of outer sheath PVC compounds. Outer sheath with type ST1 PVC compound as per IS: 5831, which is suitable for 70°C continuous operation. Outer sheath with type ST2 PVC compound as per IS: 5831, which is suitable for 85°C continuous operation. PVC has got fire retardant properties due to its halogen content. The fire in the cable gets extinguished immediately on removal on the fire source. In the modern Power, Chemical, Fertilizer and Cement plants many PVC cables are bunched in the cable shaft or on cable trays. In case of fire in these cables, the fire becomes self sustaining. Moreover due to the burning of PVC a dense corrosive smoke is emitted which makes fire fighting very difficult, due to poor visibility and toxic nature of the smoke. HCL content of the smoke, not only damages other costly equipment lying nearby, but also penetrates the RCC and corrodes the steel reinforcement. Due to this there is an extensive to the property. To overcome these deficiencies FRLS i.e. Fire Retardant Low Smoke PVC was developed. If required, we can provide Fire Retardant Low Smoke (FRLS) PVC Inner Sheath and / or outer sheath. This PVC compound, apart from meeting the requirements of Type ST2 as per IS-5831, has got better fire retardant properties and it emits lower smoke and acid fumes when it catches fire.

• Voltage: 1100V
• Material: aluminium
• Type: Double Insulated Cable
• Size: 500M
• Packaging Type: Roll
• Number Of Core: 1
• Ideal For: Solar Panel

• Material: Copper
• Diameter: 20 mm
• Core: 2 Core
• Pipe Length: 40 Meter
• Packaging Type: Roll

The Power Cables are used under ground as well as over head transmission of power in power plants, industries, projects and all other electrical systems. power Cables carry the main load current at low/medium/high voltage of main circuit. These cables nevertheless, have higher normal current rating and therefore larger cross section of conductors. These current rating is associated with temperature rise limit. The cables are broadly divided for low tension (L.T. < 1.1 kV) and high tension (H.T. > 1.1 kV) kV application, PVC cables are commonly used for LT distribution where as PILS and XLPE cables are widely used for HT application.

90 Mtr. Lengtht 100% Flame Retradant Longer Lex Life Excellent Insulation Resistance & di-electric strength Excellent Resistance to Moisture & Abrasion Protection from Grease & Oil 3mm Pure Electrolytic Copper Heavy Weight For Extra Protection

• Color: Black
• Country of Origin: India
• Size: 2-10yard

Fiber Glass Cables, Cotton Tapes, RAYON DORI, cotton dori

Single Conductor Heating Cable

PVC Flexible Cables, Pvc Cables, aexial bunched cables, flats cables

Pvc Cable, Cable, Aluminium

Cable Pvc Manufacturer, cable manufacturer

Solar AC Cables, Solar Project Investment Services

traveling cable, cabin inspection box, Cross Flow Fan, Antique Lamp

Pvc Cables, PVC Wires, electronics wires, wires accessories

cctv camera cable, Cctv Camera Accessories, Computer Accessories

Fiber Glass Wire, Cables, Enameled Copper Wire, Fiber Glass

Industrial Wire, linear washing machine, Pharmaceutical Machinery