Infonet Solutions Bopal, Ahmedabad, Gujarat

Cant find a PoE switch for your Passive PoE equipped Aps? Cant get 100 meter of cabling distance? The NSPW-307P01-24V us about to change everything. it is the industry’s first 24V Passive PoE switch with full power supply. It consists of 7 Port Gigabit + 1 Port Gigabit Rj45. The 7 Gigabit RJ-45 Ports are built with 24V Passive PoE technology and data transmission over a single Ethernet cable, it is the ideal distribution switch for wireless solution. With the Passive PoE function, the NSPW-307P01-24V can power 24V passive PoE CPE or AP without additional power adapter. Moreover, it provides a remote management function for enabling/disabling the PoE power output. NSPW-307P01-24V also provides other useful network management Tag VLAN, Bandwidth Control, Trunking, and Broadcast Storm Control. for wireless Hotspot or WISP system, NSPW-307P01-24V helps the installer not only to establish the network easier, but to design the network more flexible and secure.   1) IGMP Snooping2) Port Mirroring3) MAC Binding & Spanning Tree advanced network management function4) Password-Protected Access5) Bandwidth Control6) Tag VLAN   7 Port Gigabit + 1 Port Gigabit RJ45   7-Port 24VDC Passive PoE   Full Power 120 Watt Power Supply   Web-Base Management for configuring PoE On/Off, Bandwidth contro, Port Trunking and Tag VLAN   Support IGMP snooping, Port Mirroring, MAC Binding and Spanning Tree advanced network management function.   Port Mirroring, Password-Protected Access   Support any 24V PoE Power devices

NETSTAR NS-E-SCH is a Power over Ethernet solution for extending Ethernet connectivity upto 700 meters. This switch can be powered using Smart Chain Switch from NOC or POP of ISP using specially designed NETMODEM (PoE Injector) or any standard PoE Injector (24V DC, 0.75 AMP). Smart Chain Switch is useful where ISP have own power and don’t require power from customer premises. this eliminates the needs of arranging power at building top (UPS not require/ No need to pay more money to customer or society). This saves lot of MONEY of ISPs and improves uninterrupted service to the customer.   1) Power over Ethernet Solution:8 Port 10/100 Smart Chain Switch which has latest generation of fast Ethernet technology. It contains 6 x 10/100 Base LAN Ports, 1 x 10/100 Base PoE In Port & 1 x 10/100 Base PoE Out Port.2) Supports Auto-Negotiation: Each of the ports automatically detect whether connected network devices are running at 10Mbps or 100Mbps and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy and hassle-free operation3) Supports Non-Blocking Wire Speed:The Switch forwards and receives traffic seamlessly with its non-blocking wire-speed. Every port of the Switch supports speeds up to 200Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices and allowing you to run a high speed network smoothly.4) Cascading Support: NS-E-SCH Is a Power over Ethernet solution for extending Ethernet connectivity upto 700 meters.5) Port Based Isolation/Hardware VLan: The feature of Port Isolation is Implemented in this unit where in the Ethernet Data of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other. Port Base I solation Can be Enabled or Disable using DIP Switch.6) Surge Protection: We provide 2500V Surge protection on each port to protect against high voltage surge on data ports or uplink port7) Over Voltage Protection: Over Voltage Protection is provided on each Data Port to eliminate damage due to connection of Higher Voltage (Higher than 24V DC , upto 50V DC). By mistake if user connect more then 24V PoE Injector then Switch will goes on power off mode and will start working again once this high voltage source is removed.8) Over Current Protection: We have provided over current protection on each port to prevent damage to the switch in case of high current flowing due to any reason. This is provided using Resettable Fuse to facilitate easy maintenance and avoiding frequent change of blown fuse.

  NETSTAR switch has intelligent Power management features solving a major problem of powering the device for Internet Service Provider. This switch can be powered using Remote Power from customer using specially designed NETMODEM(PoE Injector) or any standard PoE Injector (24V DC, 0.75 AMP). This eliminates the needs of arranging power at building top (UPS not require/ No need to pay more money to customer or society). This saves lot of MONEY of ISPs and improves uninterrupted service to the customer.   1) Remote Powered Technology:8 Port 10/100 Remote Powered Switch which has latest generation of fast Ethernet Remote Powered switching technology. It contains 7 x 10/100 Base T Remote Powered Ports, 1 x 10/100 Base Data Uplink Port & 12V DC Out for Powering ONU2) Supports Auto-Negotiation: Each of the ports automatically detect whether connected network devices are running at 10Mbps or 100Mbps and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy and hassle-free operation.3) Supports Non-Blocking Wire Speed: The Switch forwards and receives traffic seamlessly with its non-blocking wire-speed. Every port of the Switch supports speeds up to 200Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices and allowing you to run a high speed network smoothly.4) Cascading Support: Switches can be Cascaded for more users per Building (Up to 1 Main + 3 Switches of NS-ER7-P1).5) Port Base Isolation/Hardware VLAN: The feature of Port Isolation is implemented in this unit where in the Ethernet Data of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other. Port Base Isolation Can be Enabled or Disable using DIP Switch.6) Surge Protection: We provide 2500V Surge protection on each port to protect against high voltage surge on data ports or uplink port.7) Over Voltage Protection: Over Voltage Protection is provided on each Data Port to eliminate damage due to connection of Higher Voltage (Higher than 24V DC , upto 50V DC). By mistake if user connect more then 24V PoE Injector then Switch will goes on power off mode and will start working again once this high voltage source is removed.8) Over Current Protection: We have provided over current protection on each port to prevent damage to the switch in case of high current flowing due to any reason. This is provided using Resettable Fuse to facilitate easy maintenance and avoiding frequent change of blown fuse.

NETSTAR NET MODEM (POE Injector) is used to power variety of Netstar Switch and other CPE (15V, 1A). NETSTAR PoE Injectors provide variety of features like Surge Protection, Overload & Short Circuit Protection.   1) Over Voltage Protection2) Surge Protection3) Short Circuit Protection4) 3 Pin Power Cord

NETSTAR switch has intelligent Power management feature solving a major problem of powering the device for ISPs. This switch can be powered using Remote Power from customer end using specially designed reliable NETMODEM from us or any standard PoE Injector (24V DC, 0.75 AMP). This eliminates the need to arrange for power at building top and no UPS is needed / no money to be paid to society/power providing customer. This saves lot of MONEY for ISPs and improves service delivery with uninterrupted service to the customer.     Application Scenario   Outdoor Remote Powered Switch With 24V PoE Out Uplink For Wireless CPE (WISP) NS-RP071P-OD 7 x 10/100 Base T Remote Powered Ports & 1 x 10/100 Base T PoE Out (24V) Uplink Port Download Datasheet NS-RP071P-ODCategory: Outdoor Remote Powered Switch Enquire Now DESCRIPTION TECHNICAL SPECIFICATIONS FEATURES 1) Remote Powered Technology:8 Port 10/100Mbps Switch which is latest generation of fast Ethernet Remote Powered switching technology. It contains 7 Downlink 10/100Base-TX ports plus one UPLINK 10/100BaseT Port (PoE OUT Port, 24V) (Other PoE OUT Voltage available 12V, 48V).2) Intelligent Power Management Feature: Switch works on Intelligent Power Management Feature (IPM), IPM enable switch to source power from customer’s Net modem. (Sourced from us or any standard PoE Injector (24V DC)) under remote powered Technology and this eliminates need of any external source for electricity /UPS/Power Providing by Customer. This saves money and creates convenience to the operator (ISP) with uninterrupted service to the customer3) Supports Auto-Negotiation:Each of the Switch’s ports automatically detect whether connected network devices are running at 10Mbps or 100Mbps and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy and hassle-free operation.4) Supports Non-Blocking Wire Speed: The Switch forwards and receives traffic seamlessly with its non-blocking wire-speed. Every port of the Switch supports speeds up to 200Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices and allowing you to run a high speed network smoothly.5) Port Based Isolation/Hardware V Lan: The feature of Port Isolation is implemented in this Unit where in the Ethernet Data of the Uplink Port can be transferred to any of the Downlink ports but the I ndividual Downlink ports cannot communicate with each other. This feature is implemented using Port based VLAN.Port Isolation (Can be enabled/Disabled using DIP Switch). Switch also supports Broadcast storm control by providing a DIP switch to enable / disable the same6) Surge Protection: We provide 2500V Surge protection on each port to protect against high voltage surge on data ports or uplink port7) Over Voltage Protection: Over Voltage Protection is provided on each Data Port to eliminate damage due to connection of Higher Voltage (More than 24V DC, upto 50V DC) PoE injector on user data port by mistake. Switch will not be damaged but will stop functioning and will start working again once this high voltage source is removed.8) Over Current Protection: We have provided over current protection on each port to prevent damage to the switch in case of high current flowing due to any reason. This is provided using Resettable Fuse to facilitate easy maintenance and avoiding frequent change of blown fuse.