Injectable Dry Powder Filling Machine Dealers in Odhav, Ahmedabad

• Weight: 1000-2000kg
• Automatic Grade: Automatic
• Driven Type: Electric
• Warranty: 1year
• Voltage: 220V

The injectable vial filling machine dispenses sterilized powder through a set of two powder hoppers that are vibrated by mechanical agitators. Each wheel has a piston used to meter the powder being feed to vacuum space between the hopper and piston as well as a doctor blade to scrap off excess powder.   Salient Features  Robust and vibration free design Minimum changeover time Compact & versatile design Easy to clean Suitable for different volumes   Application Filling     Industry  Pharmaceuticals Veterinary Cosmetics

• Model No.: HPF-120 (Single Powder Wheel & Hopper)
• Production Output: 40 to 100 vials per minute (Depend on fill size)
• Vial Sizes: 5ml to 30ml Glass Vials (Dia. 22mm to 38mm)
• Rubber Stopper: 20mm (With the help of change parts)
• Filling Capacity: 50mg to 1.5 grams in single dose, 1.5 grams to 6 grams in double, triple and four dose (with help of change parts)
• Filling Accuracy: + 1 % depending upon consistency and uniformity of bulk density of sterile powder of under controlled level of humidity (Below 28% Rh)
• Electrical Supply: 2 H.P.
• Powder Requirements: 3 Phase, 415 Volts, 50 Hz
• Conveyor Height: 850mm to 900mm Adjustable
• Dimension: 2800mm (L) X 900mm (W) X 1700mm (H)
• Net Weight: 650Kgs.
• Gross Weight: 980Kgs.

Automatic High Speed Injectable Powder Filling with Rubber Stoppering Machine is a Double wheel Double Track Powder Filling Machine with Vibratory Rubber Stoppering Unit to feed higher quantity of rubber stopper to the feeding chute for High Speed Performance of Machine. This Machine is mainly used to fill two different product in one vial or to fill Double dosing product at the speed of 250 Vial / min.     The incoming dry vials (sterilized and siliconised) are fed through the unscrambler with suitably guided on the moving delrin flat conveyor belt at the required speed of the correct placement below powder wheel. The sterilized powder stored in two powder hoppers is agitated by pair of mechanical agitators for maintaining consistency and uniform bulk density, each powder wheel having eight ports rotates at the pre determined speed below the powder hopper with practically no clearance. Powder wheel consist of Piston in each port and behind the powder wheel, vacuum plate is provided there is no clearance between powder wheel and vacuum plate due to back spring pressure. Precise volume of powder is sucked in to the port of powder wheel during vacuum according to the piston length different fill size can be achieved. The excess powder is doctored off by a doctor blade, the doctor blades can also be adjusted from outside without removing powder hopper. When powder wheel indexes further and remain in the port due to the vacuum till it reaches just vertically above the vial. The time dose of Compressed air, sterilized low pressure air or Nitrogen Gas sequentially flushes out powder from the port of powder wheel in to the container one by one. It is a double wheel Double track machine, so each powder wheel is filling vials alternately with double track system. The filled vials are immediately separated on the conveyor by vial separator and moves further for stoppering operation. (Different grooves separator can be used which depends on the container diameter or multiple dosing system.) After separated from vial separator, vials move further towards rubber stoppering unit and in between it will be converted in to single track from from double track with the help of suitable guide rails on machine conveyor. The sterilized and siliconised rubber stoppers stored in the vibrator bowl moves vertically to the rubber stopper chute. The vial is hold firmly between pair or timing belt to pickup rubber stopper from exit end of the chute. Further the vials are passed between two pressing roller for tight fit fixing of rubber stopper. After stoppering operation, vials will be collected in to the Scrambler and move towards sealing machine for Vial sealing operation.

• Container Dia: 25mm to 38mm
• Container Height: 36mm to 75mm
• Rubber Stopper: 20mm Buty

SALIENT FEATURES “No Container - No Filling” system eliminates wastage of costly powders Machine can be operated in Single Stroke to Four Stroke and provide output up to 50 fills per minute with an accuracy of ± 2% depending upon powder type and fill size. All parts coming in contact with the product are made out of S.S 316 material and easily removable for mandatory autoclaving/sterilization. Totally enclosed heavy steel structure body to avoid any vibration. Variable AC Frequency drive for speed adjustment. Endless conveyor belt to prevent jamming of assembly due to spillage of powder. TECHNICAL SPECIFICATION Product Rate : 30 to 120 Fills/Min. (HPF 120)     Fill Capacity :   50mg to 1.5 grams with the help of change parts. Accuracy :   ± 1% depending upon consistency and uniformity of bulk density of Injectable Powder under controlled level of humidity (Below 28% Rh) Power Specification :   1.5 H.P., 3 Phase, 4 Wire System, 50 Hz. Utility :   Compressed Air: Max. 2 Kg./Cm² Oil FreeVacuum: 25 Hg. @ 300 LPM DisplacementRelational Humidity: Below 28%  Optional Accessories :   Pure Air Filter, Vacuum PumpProgrammable Logic Control (System) with MMIOil Free Air CompressorAluminum Profile Cabinet covering full machineOnline Pre-Media Filling Arrangement Overall Dimension :   2100mm (L) X 850mm (W) X 1700mm (H)Net Weight: 655 Kgs. Gross Weight: 1010 Kgs.

• Fill Capacity: 50 mg. to 1.5 gms
• Container Diameter: 25mm to 38mm

The sterile dry powder filling with rubber stoppering machine is a comprehensively designed compact sized model used for filling and stoppering of dry powder injectable into the vials. It comprises of a precision built frame that is coated with the stainless steel sheets with access doors. The model is designed sophisticatedly in accordance to the cGMP standards.

• Overall Dimension: 2100mm (L) X 842mm (W) X 1700mm (H),2300mm (L) X 842mm (W) X 1700mm (H)
• Container Diameter: 25mm to 38mm

Automatic Injectable Powder Filling & Rubber Stoppering Machine having eight ports in a powder wheel. The precision built welded steel frame is encompassed with stainless steel sheets with access doors for servicing the machine. Adinth offers two models in this machine, first is Automatic Single Wheel Injectable Powder Filling & Stoppering Machine which provides output up to 7000 vialshour and second is Automatic Double Wheel Injectable Powder Filling & Stoppering Machine provides output up to 14000 vialshour. All contact parts made for Good house keeping and complies as per current good manufacturing practice (cGMP).