Injectable Machinery Dealers in Vastral, Ahmedabad

Adinath International offers Injectable Liquid Filling Machine to fill injectable glass vials. The basic unit consists of turntable, Stainless Steel Stat conveyor belt, unique eccentric pre-gassing, filling and post-gassing. Highly efficient and precision built Stainless Steel 316L Syringes, non- toxic synthetic rubber tubing and easy reach compact panel from a leading manufacturer and exporter of pharmaceutical machinery in Ahmedabad, India.

• Filling Accuracy: ±0.5% -±1%
• Filling Range: 2ml to 250ml

Injectable Liquid Filling Machine is suitable to fill injectable glass vials. The basic unit consists of turntable, Stainless Steel Stat conveyor belt, unique eccentric pre-gassing, filling and post-gassing. Highly efficient and precision built Stainless Steel 316L Syringes, non- toxic synthetic rubber tubing and easy reach compact panel.The minimal distance between filling and stoppering units reduces the risk of contamination. The machines are designed for operation in a sterile area and for use under laminar flow protection. The un-scrambler itself has been redesigned to eliminate dead ends and difficult-to-clean spots.

Automatic High Speed Injectable Powder Filling with Rubber Stoppering Machine is a Double wheel Double Track Powder Filling Machine with Vibratory Rubber Stoppering Unit to feed higher quantity of rubber stopper to the feeding chute for High Speed Performance of Machine. This Machine is mainly used to fill two different product in one vial or to fill Double dosing product at the speed of 250 Vial / min.   The incoming dry vials (sterilized and siliconised) are fed through the unscrambler with suitably guided on the moving delrin flat conveyor belt at the required speed of the correct placement below powder wheel. The sterilized powder stored in two powder hoppers is agitated by pair of mechanical agitators for maintaining consistency and uniform bulk density, each powder wheel having eight ports rotates at the pre determined speed below the powder hopper with practically no clearance. Powder wheel consist of Piston in each port and behind the powder wheel, vacuum plate is provided there is no clearance between powder wheel and vacuum plate due to back spring pressure. Precise volume of powder is sucked in to the port of powder wheel during vacuum according to the piston length different fill size can be achieved. The excess powder is doctored off by a doctor blade, the doctor blades can also be adjusted from outside without removing powder hopper. When powder wheel indexes further and remain in the port due to the vacuum till it reaches just vertically above the vial. The time dose of Compressed air, sterilized low pressure air or Nitrogen Gas sequentially flushes out powder from the port of powder wheel in to the container one by one. It is a double wheel Double track machine, so each powder wheel is filling vials alternately with double track system. The filled vials are immediately separated on the conveyor by vial separator and moves further for stoppering operation. (Different grooves separator can be used which depends on the container diameter or multiple dosing system.) After separated from vial separator, vials move further towards rubber stoppering unit and in between it will be converted in to single track from from double track with the help of suitable guide rails on machine conveyor. The sterilized and siliconised rubber stoppers stored in the vibrator bowl moves vertically to the rubber stopper chute. The vial is hold firmly between pair or timing belt to pickup rubber stopper from exit end of the chute. Further the vials are passed between two pressing roller for tight fit fixing of rubber stopper. After stoppering operation, vials will be collected in to the Scrambler and move towards sealing machine for Vial sealing operation.

• Approx Price: Rs 95,000 / Carat

After being a hard competitor to our contemporaries in Ahmedabad(India), our organization now has come forward to contest the providers in other marketplaces. Our Carton Dispenser Inject Coding Machine comes with the features like quick response, sturdiness and high durability. We are working with a team of deft professionals who manage the entire task proficiently and lay special emphasis on product packaging so as to ensure safe and secure deliveries.

• Weight: 1000-2000kg
• Automatic Grade: Automatic
• Driven Type: Electric
• Warranty: 1year
• Voltage: 220V

The injectable vial filling machine dispenses sterilized powder through a set of two powder hoppers that are vibrated by mechanical agitators. Each wheel has a piston used to meter the powder being feed to vacuum space between the hopper and piston as well as a doctor blade to scrap off excess powder.   Salient Features  Robust and vibration free design Minimum changeover time Compact & versatile design Easy to clean Suitable for different volumes   Application Filling     Industry  Pharmaceuticals Veterinary Cosmetics

• Conveyor Height: 800 ± 50mm
• Power Supply: 1.5 to 4 HP, 3 Phase, 50Hz

Input Specification:- Std. 2m1 to 100m1 Round vial, Vial Dia. : 16 mm to 55 mm, Vial Height : upto 100 mm, Rubber Stopper : 13mm 120mm I 32 mm plain or slotted stoppers. Can accommodate different size of vials & stoppers on special machines.

• Model No.: HPF-240 (Double Powder Wheel & Hopper)
• Production Output: 80 to 240 vials per minute (Depend on fill size)
• Vial Sizes: 5ml to 30ml Glass Vials (Dia. 22mm to 38mm)
• Rubber Stopper: 20mm (With the help of change parts)
• Filling Capacity: 50mg to 1.5 grams in single dose, 1.5 grams to 6 grams in double, triple and four dose (with help of change parts)
• Filling Accuracy: + 1 % depending upon consistency and uniformity of bulk density of sterile powder of under controlled level of humidity (Below 28% Rh)
• Electrical Supply: 3 H.P.
• Powder Requirements: 3 Phase, 415 Volts, 50 Hz
• Conveyor Height: 850mm to 900mm Adjustable
• Dimension: 3650mm (L) X 1000mm (W) X 1700mm (H)
• Net Weight: 1050 Kgs.
• Gross Weight: 1400 Kgs.

• Accuracy: ±1%
• Model No.: SBLFRS – 60
• Direction: Left To Right
• Production Rate: Up to 20 to 60 Vial Per Minute for Single Dose (with help of Change Part)
• Fill Capacity: 2 ml to 100 ml – with help of change parts
• No. of Syringes: Two (02) Nos.
• Power Supply: 1.00 HP
• Electric Supply: 220/ 415V, 3 Phase, 50-60Hz (4 Wire System)
• Vial Diameter: 16mm to 50mm

SBLFRS 60 Automatic Two Head Vial Filling & Rubber Stoppering Machine is a compact model used for filling and rubber Stoppering of Injectable liquid into vials.The incoming dry vial (Sterilized) are fed through the Unscrambler and suitably guided on the moving delrin slat conveyor belt at the required speed of the correct placement below filling unit.The filling unit consists of Filling Head, Syringes & Nozzles which are used for liquid filling. The Syringes are made of SS316 construction and both, glass as well as SS Syringes can be used. A Star Wheel is provided which holds the vial during filling operation. A sensor is provided for �NO VIAL, NO FILLING� operation. Syringes are mounted on eccentric block and driving through bottom main Gear Box. Volume can be either increased or decreased by increasing or decreasing stroke length of piston as per filling size. Syringes are having non return valve for sucking and delivering situation to avoid volume variation. Liquid will reach to filling nozzles through silicon transparent pipe. Nozzle will be having Up and Down movement with help of cam mechanism and it will come down when vial will be hold by Star Wheel for filling operation and Stars filling when it starts to move up and after completion of filling operation, Star Wheel delivers four six vials together on conveyor for Rubber Stoppering operation.

Item Code: AEPF-240Our range of High Speed Injectable Powder Filling Machine Model No.AEPF -240 is widely catering to the requirements of diverse industries such as pharmaceuticals, chemicals, cosmetics and food-beverages. These High Speed Injectable Powder Filling Machine are equipped with contactors and relays for the protection against any overload or jamming. We also provide High Speed Injectable Powder Filling Machine variable frequency drive for speed control and all the contact parts are easily removable for autoclaving / sterilization. Technical specification:Production rate: 240 Fills/Min. For single dose 120 Fills/Min. For double dose 60 Fills/Min. For triple dose 30 Fills/Min. For four dose Power specification: -1.5 H.P, 440 Volts, 3 Phase, 4 Wire System, 50 Hz. Fill capacity: -50 mg. to 1.5 gm. in single dose with the help of extra change parts Accuracy 3050mm (L) x 715 mm (W) x 1700mm (H) Net weight: 850 Kgs. Gross Weight: 10 50 Kgs. Input Specification: Container dia.: 25mm to 38mm Container height: 36mm to 75mm max. Rubber stopper: 20mm Butyl Utility Compressed air: Max. 2 Kg /Cm2 Oil Free Vacuum: 25" Hg. @ 300 LPM Displacement relational humidity: Below 28%

injectable machine, WASHING MACHINE, Tanks, Syringe, Sealing Machine

Injectable Liquid Filling Machine, Beverage Filling Machine

Injectable Liquid Filling Machine, Honey Filling Machine