Back Back
Universal Strength Machine
67,000 Per Piece
Universal strength machine is used to test various strengths for moulding and core sands. Auto testing cycles available on just a button press. Can conduct test for compression, tensile, shear, splitting strength specimen with appropriate attachments. Computer interfacing through rs485 serial and wireless through appropriate attachments is possible. Requires pneumatic air supply of 6 kgcm2. (default: 230v ac, 50hz). Features: calibration reminder equipment life counting way faster, better and accurate result processing than its predecessor (vud) diagnosis mode for fault detection
...more
Thermocouple Tips
28 Per Piece
Thermocouple tips for measurement of molten metal temperature are available in standard ipts 68 and ipts 90 calibrations with different thermocouple types. The thermocouple wires are rigorously selected in order to guarantee and accuracy of 0 to ±1.5°c at 1554°c (pd melting point). ​features: measuring time: 3 to 8 seconds maximum immersion time : 8 seconds available in a variety of immersion tube lengths and connector diameters. Available with steelaluminiumcopper protective cap
...more
Spectrometer Sample Holder
750 Per Piece
Spectro sample holder for safe grinding of the spectrometer chill sample. Features: holder is designed as per chill size. Mechanical sample holder magnetic sample holder mould as per spectro chill
...more
Sandpaper Abrasives
65 Per Piece
Sandpaper is produced in a range of grit sizes and is used to remove material from surfaces, either to make them smoother, to remove a layer of material, or sometimes to make the surface rougher. Grit refers to the average particle diameter. Larger the grit, smaller the particle size and smaller the grit, the coarser the particles are. Features: in the form of a sheet, usually 9 by 11 inches (280x230 mm) available in circular form 350mm by 40 mm bore
...more
Remote Display for Spectrometer
75,000 Per Piece
It is a remote digital display unit specially designed for melting platform people to see the online results obtained by spectrometer in lab. this display can be connected to any make and model of spectrometer. Thus considerable time, electrical power can be saved and it also reduces chances of change in bath chemistrynucleation properties due to holding of metal till results of spectrometer are conveyed to melting platform. ​ there is a facility of dual colour element display so that within set limit elements will be displayed in green colour and out of set limit elements will be displayed in red colour. ​ features: micro-controller circuitry enables it to connect to any make of spectrometer. Zero maintenance audio alert indication at the arrival of new data from spectrometer.
...more
Microscope Alumina Paste
500 Per Piece
Alumina paste is of high quality, fine graded alumina suspension (water-based) for fine and end polishing of metallographic specimens. These are abrasive powders that are prepared from aluminium oxide, offering excellent coarse and intermediate polishing, with fast results. Features: reduces surface distortions gives excellent polishing results used for analytical applications where diamond polishing is not suitable (analysis of carbon)
...more
Grit Paper
20 Per Piece
Micro polishing paper (silicon carbide polishing paper) available in different grits of 150, 220, 400, 600, 800 & 1000.
...more
Metallurgical Microscope Image Analyser
350,000 Per Piece
We offer image acquistion system using cmosccd camera. Interactive image acquistion, analysis and archiving data is also possible. cmos camera: motic, artray and olympus cameras ccd camera: watec, samsung, sony and jvc cameras material analysis module includes: grain size measurement phase analysis measurement graphite flake measurement nodularity measurement porosity measurement 2d measurement banding measurement inclusion rating measurement micro hardness measurement dendrite arm spacing measurement
...more
Immersion Temp Pyrometer
24,000 Per Piece
Immersion type portable battery operated temperature measuring system for molten metal with wireless communication for auxiliary display, computer and printer. It measures the molten metal temperature by dipping thermocouple tip in it. it uses plateau detection technique to detect correct temperatures within 3-8 seconds. Once the correct temperature is detected the same will be displayed on the portable system and at the same time data will be transferred wirelessly to the system. features: uses plateau detection technique for accurate temperature measurement local display of temp on portable display remote display of temp on 4" size large display unit can measure temp of molten steel, cast iron, copper, brass, bronze, aluminium and so on handy, light-weight & compact accuracy +-1 deg celsiusfahrenheit automatic power-off function 4-digit seven segment led display intelligent self calibration eliminates wiring cost and transmission wires eliminates down-time caused by breaking or burning or shorting problem of wires
...more
Gates Hose
Material : Rubber, Stainless Steel
Type : Gates Hose
Working Pressure : 17.40 Psi, 17.50 Psi ,17.60 Psi
Packaging Type : Plastic Bag, Corrugated Box
...more
Digital Mould Hardness Tester
18,000 Per Piece
Digital mould hardness tester is used to test hardness of prepared sand mould. It consists of digital indicator and special geometry plunger to read hardness of green mould from 0 to 100 nos. Precautions: keep the instrument clean and away from dust ensure that all sticking sand is removed from the instrument before and after every test. Do not tamper with the setting and calibration
...more
CRM (Certified Reference Material) for Spectrometer
20,000 Per Piece
Crm (certified reference material) for spectrometer crm (certified reference material) for spectrometer are available in disc blocks chips powder pins forms. Widely used for calibrating all types of optical emission spectrometers, atomic absorption spectrometer, edxrf & icp analyzers as well as leco inc.-usa, eltra-germany, horiba-japan made combustion analyzing machines. Available for: standard samples for ferrous metals like stainless steel, low alloy high alloyed steel, low carbon high carbon steel, tool steels etc. Standard samples for non ferrous metals like aluminium and its alloys, copper and its alloys, bronze, nickel etc. Standard samples for minerals, ores, slags, coal, cement, soils, oils, glass, paper, refectories etc. Standard samples for ferro alloys like ferroboron, ferromanganese, ferrochrome, ferroomoly, ferroniobium, ferronickel, ferrotitanium etc. Standard samples for physical testing like hardness, tensile strength etc. Standard samples in the form of 1gm or 0.5 gm. Pins 1 gm. Rings chips powderfor combustion materials for crucible analysis. Spares, accessories, consumables & calibration standards for leco-usa, eltra-germany, horiba-japan & bruker analytical-germany make carbon, sulfur, oxygen, nitrogen & sulfur combustion analyzing machines.
...more
carbon cups
25 Per Piece
Carbon cups are tellurium coated sensors used for determination of carbon equivalent, % carbon and % silicon in gray, malleable and ductile iron. They cover the entire range from 2.5 to 5 ce. ​ features: available in round and square shape guaranteed white iron solidification close control on chemistry ensures least rejection can be used with any make of ce metercarbon silicon analyzer based on thermal analysis principle cup available in small, medium and large size to suit various applications in foundry
...more
Spectrometer Polishing Grinder
35,000 Per Piece
1 Piece(s) (MOQ)
This polishing machine is equipped with a high speed motor which makes the sample polishing surface finishing of the sample ready in few seconds. ​ Features: Machine to suite the disc housing and to cover the disc plate by 300 degrees for safety. Includes an easy-to-use control panel with quick access to power on-off Emergency stop button
...more
Carbon Silicon Analyser
65,000 Per Piece
It is a microprocessor based carbon silicon analyzer series designed for molten cast iron analysis. It is specially engineered to suit the foundry environment. It consists of special electronic hardware & software which automatically correct errors introduced due to de-ratingageing effect of electronic components, ensuring long term accuracy of measurements.
...more
Advanced Casting Simulation Software
Match Plate mounting VMC
Foundry Layout
Reviews & Ratings
Write a ReviewBe first to Rate
Rate ThisOpening Hours
Share your Correspondence Details to receive messages from Innovative Foundry Solutions
Post Free Ad