Intercooler Hoses Dealers in Ellisbridge, Ahmedabad

We are offering Pvc Reinforced Hose

We manufacturer high quality of silicone braided hose with excellent flexibility-can be both stretched or compressed and silicon can be obtained in a range of qualities resistant to temperature from -116 c to +315 c. It doesn't support bacterial growth, non reactive to body tissues & fluid & non-adhesive to tissues.

• temperatures: 300 Deg C.

Extruded Fin Tubes are heat exchanger tubes mainly required to transfer heat from a flowing fluid and cooling it down by passing air on the fins of the tubes. In extruded fin tubes the surface area of heat transfer is increased because of the increased height of the fins thereby causing it to become more exposed to the flowing air. Moreover in this process the thickness of the fin is also very low causing the heat transfer to become more efficient. The extruded fin tubes are used mainly where the atmosphere is corrosive and the heat transfer required is higher. Extruded fin tubes are mainly manufactured by extruding fins from the base material itself. It is generally manufactured using bimetallic combinations where the base tube can be made of Carbon Steel, Alloy Steel, Stainless Steel, etc and the fin material is Aluminum or Copper etc.

• Condition: Sterilized
• Material: Plastic
• Anticoagulant: EDTA
• Usability: Disposable

Duplex Stainless Steel Tubes, Super Duplex Stainless Steel Tubes Main applications of this duplex stainless steel tubes are in chemical processing industry, oil and gas industry and bio fuel plants. Super duplex stainless steel tubes are used in deep subsea applications.

We are reckoned as one of the most leading PTFE plastic tubing suppliers, based in India. Some of the features of our PTFE extruded tubing are listed below- Features PTFE extruded tubing is manufactured by high pressure PTFE dispense resin mixed with additive, it is extruded and sintered. According to different demands, the tubing could be opaque or translucent. PTFE is well known for its chemical resistance, not aging, non stick, self-lubrication, insulation and wide working temperature range from -180oC to +260oC. Because of these excellent properties, PTFE has a wide application in fields of chemical, mechanical, electronics, medical and aviation, etc. Applications Our PTFE extruded tubes are used as wire and cable jacket, inner lined pipes for corrosive fluids and used in hydrochloric acid heat exchanger, etc. Specifications 0.8mm wall-thickness, 1.0mm wall-thickness, 1.5mm wall-thickness (pure virgin) PTFE tubings are available.

• Color: Blue
• Condition: New
• Automatic Grade: Manual
• Feature: Low Maintenance
• Weight: 0-25Kg
• Configuration: Air Compressor
• Country of Origin: India
• Flow Rating: 100-500Cfm
• Thickness: 0.5 mm to 4.0 mm 
• Compressor Brand: Chicago Pneumatic
• Moc: Rubber, PVC Etc
• Compressor Type: Screw Compressor
• Spare Type: Hose assembly
• Air Compressor Model: 5 hp to 250 hp

Nylon Tubes are required for versatile engineering requirements and are an important part of many industrial applications. When it comes to Nylon Tubes, then we are the perfect choice for availing a range that is synonymous with superior quality. Consequently, we have achieved recognition amidst the Nylon Tube Manufacturers, Exporters and Suppliers by offering a diverse range fabricated from high grade Nylon.

• Brand Name: Pioneer Impex
• Size: As per industrial size
• Material: Plastic
• Usage: Laboratory
• Grade: STANDARD
• Anticoagulant: Sodium Citrate

• Super soft: 124

We are Manufacturer and supplier of PVC Lay flat Tubing in thickness of 0.06mm to 0.200mm and width of 6" to 36" for packaging & Stationery Application. We cater better quality best services to our client in all over India.

We are offering non vacuum blood collection tube with firm commitment to quality, we are engaged in offering superior grade non vacuum tube. Under this category, we offer edta tube (non- vacuum tube), fluoride tube (non- vacuum tube), clot activator tube (non- vacuum tube), no additive tube (non- vacuum tube) and gel and clot activator tube (non- vacuum tube). Our offered range of these tubes find their wide use for collecting, transporting and analyzing blood, plasma & serum.

• Light weight & flexible: The perfect reinforcement of rigid PVC with soft PVC gives it both, strength and flexibility. It is tough, light so easy to carry and handle thus increases working efficiency.

STRUCTURE Our Duct hose has a specially compounded rigid PVC reinforcement which is helically wound and inseparably fused to the soft inner walls. By its unique construction, ducting results in a thin, very smooth wall, being almost completely protected from any possible crushing.

• Color: White
• Size: All
• Brand Name: Bahuchar
• Application: pharma
• Packaging Type: Roll

rubber suction hoses, Self Priming Pumps, Fire Fighting Equipments

We are offering Silicon Tube. Ami Enterprises is one of the preponderant viton tubing manufacturers and silicon tubing exporters, located in India. We present silicon tube, viton tubing etc., which all are ubiquitously noted for their high level of strength. We aim to provide superior quality of our products at the most pocket friendly price.

DUPLON is designed for high-pressure applications. It is a superior replacement to conventional rubber hoses as it is made of PVC. This results in convenience due to lightweight and economy in use. It has superior consolidation and adhesion between the braids and covers, as compared to rubber hoses. DUPLON is designed to suit best in tropical climates like Indian, the Gulf and African sub-continents. Composition: Made by reinforcement (Braiding) of synthetic yarn in between two or more layers of Soft PVC. The yarn is reinforced in crosswise as well as in longitudinal directions. This provides high pressure carrying capacity as well as good flexibility.

• Material: Titanium
• Brand Name: Imported
• Usage/Application: Chemical Handling
• Size: 1 Inch
• Single Piece Length: 6 Meter

• Type: Hydraulic Hose
• Material: Iron, Plastic, PVC, RUBBER, Synthetic Rubber
• Thickness: 0.1-0.5mm, 0.5-1mm, 1-2mm
• Condition: New, Used
• Color: White,Black,Red
• Name: Hydraulic Hose Pipes
• Packaging Type: Coil,Roll,Poly Bags
• Finishing: Polished,Color Coated

Stainless Steel Cold Drawn Seamless Straight & 'U'Bend Tubes & Pipes. Welded Stainless Steel Tubes & Pipes Bright Annealed Tubes & Pipes

• Material: PTFE
• Working Pressure: 0.3 - 30 MPa
• Country of Origin: Made in India
• Features: Maximum strength, Industry approved design, Excellent durability.
• Application: Industrial
• Nominal Size: 2 inch
• Nozzle Material: SS
• Temperature: -40 to 212 Degree C
• Unit Length: 20 - 30 m

• Thickness: 0.5 mm to 25 mm

manufacturing cold drawn of Stainless Steel Seamless & Welded Tubespipes with 15 pilger mills, bright annealing furnace, 5 draw benches, 3 tube mills etc. Cold finished TubesPipes are produced out of quality seamless hollows which are manufactured in house in unit-III. Seamless hollows are either cold pilgered over pilger mills or cold drawn over draw benches using precision tooling (dies & plugs) to achieve perfect dimensions and smooth surfaces.

Air Preheater tubes are essentially a type of heat exchanger tubes use for the purpose of heating air which is further used in other applications like Boilers, Dryers etc.

• sizes range: 20.00 mm to 88.90 mm

We manufacture a range of high quality Stainless Steel Welded Tubes, that are used in various industrial applications. The cold rolled stainless steel strips are welded into tubes in the state of the art tube mills under fully automated precision process. Complying with the international standards, these can be availed in various sizes and specifications to suit the diverse requirements of the clients. The manufacturing of tubes begins with slitting of strips of required width based on the diameter of the tubes to be formed. Stainless steel slitted strips are passed through a series of rollers and tubes are formed automatically on different stands with rolls and welded on fully automated process of TIG welding without the addition of filler metal.

• Material: SS
• Length: Customized
• Burst Pressure: 540 Bar

• Material: PVC
• Shape: Round
• Specialities: Perfect Finish

flexible ducts, fiberglass tissue, GLASS WOOL roll

• Material: Copper
• Application: Industrial
• Outer Diameter: 350 mm
• Unit Length: 18 m
• Packaging Type: Loose

• Material: Stainless Steel
• Finishing: Polished
• Country of Origin: Made in India
• Brand Name: Aeroflon Engineers Private Limited
• Packaging Type: Box
• Compressor Type: Screw Compressor

High pressure braided rubber hose as per IS: 444 Type II / PVC

• Color: Blue
• Brand: IMI Norgren
• Roll Length: 100 m
• O/D Tube: 4 mm
• Model: PU2-0504100