J.D.Engineers Vatva, Ahmedabad, Gujarat

We are offering wet scrubbers are effective air pollution control devices for removing particles andor gases from industrial exhaust streams. A wet scrubber operates by introducing the dirty gas stream with a scrubbing liquid – typically water. Particulate or gases are collected in the scrubbing liquid. Wet scrubbers are generally the most appropriate air pollution control device for collecting both particulate and gas in a single system. Pollution systems offers a variety of wet scrubber systems specifically designed for your process application. Many important operating variables are considered when evaluating the size and type of scrubber for any specific application. We will work with you and use our experience and knowledge to provide the proper solution for your process.

Type : Wet water Scrubber

Brand Name : J.D.Engineers

Material : Stainless Steel

J.D.Engineers is a leading manufacturer of Thermic fluid heater in Multi Fuel Fired Units. Picture attached is of J.D.Engineers design of vertical 4-Pass Thermic Fluid heaters with Helical Coil inter Connected with furnace, Top Duct, Convective Coil attached with 2-Pass APH Unit. J.D.Engineers offer Fuel Options like Coal, Wood, Lignite, Husk, Bagasse, Pet Coke, Saw dust, agro-waste. Thermal Oil Heaters range from 0.05 million kcalhr to 10 million kcalhr. All Thermal Oil Heaters are made with a coil type design ensuring instant heat J.D.ENGINEERS thermal oil heaters are successfully used in industries with over 350 installations operating since last 28 years. J.D.ENGINEERS thermal oil heaters are characterized by following features: Tailor made design to individual customers requirements. High effficeiccy which loads to low operating cost Environment friendly due to low emission.

Brand Name : J.D.ENGINEERS

Style : Vertical & Horizontal

Fuel : Coal,Lignite,Steam Coal,Husk,Wood

Three pass design ensures more travel of flue gases to allow maximum heat transfer. Wet back design prevents uneven thermal stresses on rear tube plate and obviates need for refractory work. Manufactured as per indian boiler regulations with updated amendments. Compact and sturdy design. Minimum space requirement. Maximum boiler efficiency with better steam quality. Can be easily converted into oilgas firing system.

Type : Wet Back Jacketed 3 pass Horizontal & Water wall Membaren Type Of Steam Boiler

Fuel : Solid Flued Fired

Application : Steam Coal, Lignite, wood

Pressure : up to 17.58 kg/cm2

J.D.ENGINEERS is manufactured with Water cum Smoke Tube design that makes it doubly advantageous. It provides a water-cooled furnace which is paneled to prevent heat loss. The tall shape of the furnace provides sufficient residence time for complete combustion of fines & volatiles and reduces the carry over. The vertical configuration of evaporative tubes enables better circulation of steam. A boiler quality strip provided in between the water wall tubes makes the furnaces leak-proof The large sized drum makes available greater steam-water interface area thus ensuring Dry Steam. Features Optimum thermal efficiency due to higher combustion volume & large grate area. Minimal radiation losses due to water membrane wall mounted on furnace. Minimum maintenance required due to less refractory work. Better response to fluctuating steam load as large water & steam holding capacity. Dry steam due to large steam to water interface area. MULTI -FUEL OPTIONS Coal, lignite, wood and all type of agro waste. FIRING OPTIONS Manual firing FBC - Over bed feeding FBC - Under bed feeding Pneumatic firing Dumping grate Pulsating grate Reciprocating grate Travelling grate

Brand Name : J.D.Engineers

Style : Water wall Mamberan Type

Fuel : Coal,Lignite,wood

Pressure : 17.58 kg

We are offering premium quality wood seasoning chamber. Our experts have designed and developed this chamber by using ms cr sheet, channel and angle; high grade insulating material with covered outside of the chamber. Aluminum fans are provided to flow hot air from radiator for drying wet raw material. We do manufacture and supply as per specifications mentioned by customers. Owing to their reliable operations, longer service life and compact designing, this wood seasoning chamber are widely demanded in varied industries. Our offered wood seasoning chamber is up to 100 cft to 600 cft capacities, applicable in varied industries for reducing the moisture content of the wood before using. These chamber use the method of kiln drying, which is a kind of readymade steel structure and covered high grade insulating material and inside install with aluminum fans air circulators radiators and heaters and air tight door fitted with fresh air inlet and moisture exit damper . The pre-seasoned wood is stacked inside the chamber and pumping of hot air is done at regular levels which results in drying of wood to that equilibrium where further dimensional changes are minimal.

Type : Fully Febricated Assemble

J.D.Engineers offers 3-Pass Wet-Back Jacketed type Thermic Fluid Heaters heavy oil, light oil, gas and other fuels, etc without compromising on performance. Our heaters are available in Dual Fuel oil & gas firing versions so that you get the advantage of economically available fuels. This is fully automatic horizontal Vertical coil type 3-pass wet back oilgas fired, forced draft system. It incorporates an integral combustion chamber arranged as a nest of concentric helical tube coil fabricated out of seamlesshigh heat resistant ERW boiler tubes recommended for high temperature application. The concentric coils are placed within a shell fabricated out of Mild Steel. The wet back jacket and concentric coil allows three flues passes to ensure low heat release and maximum heat transfer. The design warrants little amount of refractory work on the hinged door to keep thermal inertia low. The 3-pass wet back design ensures maximum absorption of heat and flue gas temperature at less than 300°C in a standard heater. Features IMPORTED BURNER The heater is equipped with a fully ultimate pressure atomizing type 2-stage, 3-stage or modulating oilgas burner. The Burner is a mono-block construction and can be hinged to left or right. It simplifies the work of combustions head diffuser, nozzles and ignition electrodes. Preheated version burners are used for heavy oil firing which are equipped with electric or media oil pre-heaters which are heated nozzle heads and oil line systems. This ensures availability of evenly heated oil for flame establishment. The nozzle recirculation and positive shut off at the nozzle tip ensures trouble free operation even if temperature drops to below 0°C. CAPACITY OF BOILER :50,000 kcalhr TO 50,00,000 KCALhr

Brand Name : J.D.ENGINEERS

Fuel : Oil , Gas , Diesel

Pressure : 5 Kg

J.D.Engineers offer high quality and high precision Multi Cyclone Dust Collector. Primarily used for dust separation, this collector is fabricated using qualitative components including an outer cylinder, an air outlet, air inlet and cone with dust separation wing, which is assembled Dust Separation Chamber. These Multi Cyclone Dust Collectors are made from very high quality raw material which ensures high durability at its user end. The design & sizes are various as per the volume of dust generated in the area. Multi Cyclone Dust Collectors are available at industrial leading prices.

Country of Origin : India

Type : Multi Cyclone Dust Collector

Certification : CE Certified

Application : Dust Collecting

Driven Type : Electric

J. D. Engineers specializes in manufacturing quality self support chimney that meets the variegated requirements of our clientele. These are fabricated employing quality raw material like ms steel plate. Appreciated for the features like weather resistance, corrosion resistance, high performance, durability and cost effectiveness, these are highly demanded among our customers. Available in various sizes, these are customized according to the clients specific requirements. These products have their applications in power plant, thermic fluid heater, metal melting unit. These work by fuel combustion and in turn release the gases that are produced in the boiler furnaces. Moreover, available in cost competitive prices to meet the clients requirements accordingly. This chimney is designed according to the rules of pollution control board to meet better installation application

Type : Self Supported Cone & Straight Type of Chimney

Brand Name : J.D.ENGINEERS

Color : Silver & Black -High Temperature Paint

Outer Diameter : As Per Party Requirement

The bag filter system manufactured by us are designed and developed for high filtration performance. Manufactured using high grade raw material, this provide filtration solution for a broad variety of fluid applications. The filter system is essential for large volumes of high velocity liquids. This bag filter system are manufactured using filter housing, filter bags, internal cage to support bags, positive sealing arrangement and choice of end connections. Our range of filters has been designed on the well known energy efficient opt pulse concept. Additionally, these can be manufactured as per the specifications details given by our clients.