Kilns Dealers in Ahmedabad

• Application: Industrial
• Weight: 10000-15000kg
• Driven Type: Hydraulic
• Warranty: 2years
• Orientation: Horizontal

The kiln is a cylindrical vessel, inclined slightly to the horizontal, which is rotated slowly about its axis. The material to be processed is fed into the upper end of the cylinder. As the kiln rotates, material gradually moves down towards the lower end, and may undergo a certain amount of stirring and mixing. Hot gases pass along the kiln, sometimes in the same direction as the process material (co-current), but usually in the opposite direction (counter-current). The hot gases may be generated in an external furnace, or may be generated by a flame inside the kiln. Such a flame is projected from a burner-pipe (or “firing pipe”) which acts like a large Bunsen burner. The fuel for this may be gas, oil or pulverized coal.

• Brand Name: Laxmi Group
• Condition: Good
• Product Type: Cement rotary kilns
• Place Of Origin: Ahmedabad,Gujrat
• Place Of Origin: As per client requirement

Rotary kiln cement plant - manufacturing process cement manufacturing process crushing & proportioning : - in cement manufacturing process the main raw material is limestone grinding, which is crushed and transported to the pre-blending stockpile by means of a belt conveyor. After reclaiming it is stored into the respective hoppers along with other raw materials. These raw materials then extracted in desired proportion with the help of electronic weigh feeder & transported to the raw mill for fine grinding. Cement manufacturing process raw milling & blending : - the raw mill is a closed circuit ball mill equipped with high efficiency separator. After grinding to 90 microns size the raw meal is send to the continuous blending silos (cfc) for homogenization & extracted by means of load cell hopper for feeding to the kiln pre heaters. Cement manufacturing process pyro processing : - it consists of series of low-pressure drop, pre heater cyclones generally with fluidized bed calciner, where the calcinations begin and material goes into the rotary kiln and after clinkerization the hot material is sent to the cooler for its cooling. The cooler is efficiently designed to recover maximize heat while cooling the hot clinker which is then crushed & sent to the stock pile for intermediate storage. Cement manufacturing process burning :- the required temperature for the clinkerisation is about 1500oc, which can be attained either by coal, gas or oil. The burner is fuel-efficient specially designed multi channel type for uniform burning. cement manufacturing process cement milling, storage & packing:- the clinker mixed with app. 5% of gypsum is sent to the cement mill (ball mill) for fine grinding to produce cement. It is then transported to cfc silo for blending & storage and is packed in the bags with helps of auto packers & transported to the market for sale

• Feature: Application specific design, Low maintenance cost , Durability

• Color: Brown
• Features: Dimensional accuracy ,Strength
• For Use in: Side Walls, Partition Walls, Floor
• Shape: Rectangular
• Resistance Durability: Heat Resistant
• Size (Inches): 9 In. X 4 In. X 3 In., 9 In. X 3 In. X 2 In., 12 In. X 4 In. X 2 In.

• Driven Type: GIRTH GEAR
• pplication: DRY OR CALCINATION
• Capacity: 2 TPH to 100 TPH
• Process: Dry, Wet
• Firing Method: Direct firing, Indirect firing
• Length (m): 60 MTR
• Power (W): 2 MTR
• Voltage (V): 415
• Diameter (m): 1 Mtr to 3.8 Mtr
• Weight (Ton): 10 -100
• Shape: rotary
• Fuel Type: Gas, LDO, Coal

• Brand Name: Shivang
• Country of Origin: Made in India
• Features: Corrosion resistant, Exclusive range, Highly efficient
• Material Loading Capacity: 25 Kg
• Max Temperature (degree Celsius): 500-1000 degree Celsius
• Usage/Application: Industrial
• Frequency: 50/60 Hz
• Width: 600 To 1500 mm
• Height: 600 To 1500 mm
• Depth: 300 To 120 mm

Quality management is an important of our organization and we ensure, our entire range is quality guaranteed and reliable. Secure, dependable and authentic, Yes! You can trust us for making all the transactions using leading technologies. We keep stern check on the transactions made and we ensure that no third party is involved.

• Material: Metal
• Diameter: 100-200mm
• Shape: Round
• Application: Kiln
• Color: Black, Grey
• Surface: Polished

Micro Thermal Inc., also offer high fuel efficiency Tunnel Kiln for sanitary ware, tableware, advanced technical ceramics and refractory products.  

• Civil Construction / M.S. Per Fabrication: 250 CFT / 500 CFT / 750 CFT
• Thermic Fluid or Steam: 36″ (Alu. Casting)

Vertical Shaft Kiln is the right option for the refractory. Numerous fuels such as coke, coal, gas, oil, as well as other alternative fuels are combusted using different types of burner or charging systems. Our Production capacities for Vertical Shaft Kiln vary from 70 to 500 TPD are achieved.Equipped with external burners and inside special refractory structures, that allows a homogeneous heat distribution in all the kiln cross section. These kilns allow the use of a wide range of fuels, alternate andor contemporaneously. Thanks to their particular technology, in these kilns it’s also possible to use solid pulverized fuels as pet-coke, coal, saw dust or other waste fuels.

A Rotary kiln is a processing device used to raise materials to a high temperature (calcination) in a continuous process. Materials produced using rotary kilns include: Cement Lime Refractories Metakaolin Titanium dioxide Alumina Vermiculite Iron ore pellets

• Frequency: 15-60 min. retention tme
• Color: Customize
• Material Loading Capacity: 500-5000 kg
• Heating Area Size: Hole inner furnance
• Max Temperature: 1000-1500 degree Celsius

We manufacture semi-cordierite kiln furniture for crockery and insulators industry. Our Semi-cordierite products have an average life cycle of 30 – 50 runs. We produce Extruded batts, Box and Plate saggars, Kiln car supports, Setters, cranks and tubes. We can manufacture Kiln Furniture to meet your specifications.

Roller Hearth Kiln is a conveyor type kiln. The kiln enables processing of material from one end to the other including the inspection, packing to be in one continuous cycle. This continuous kiln is the most energy efficient, because heat given off during the cooling cycle is recycled to pre-heat the incoming material to be fired, Capacity of up to 160,000 rollers per year considering OD 50 rollers being fired, State of the Art German Mixer machine for uniform mixing for higher OD rollers AND High Alumina content ball mills and pebbles for smaller OD rollers, Special roofing used to completely avoid any contamination during the manufacturing process (such as dust, other organic matters etc.

• Features: High strength material with low density, Thermal shock resistance and long lasting, Cost effective.

thrust roller rotary kilns, locking rotary kilns, cement rotary kilns

viki refractory works manufacturing rotary kiln and supplies. the moist material moves through the rotary kiln, it is dried and preheated by the kiln gas, flowing in a counter-current pattern. in the reaction zone, reduction of the metal oxides occurs around 1200ã‚â°c as the zinc is vaporized as metal vapor into the gas cleaning system. zinc is then re-oxidized in the kiln atmosphere that is operated with excess air (process air is injected from the kiln end).

brick kilns, Construction Material

Cement Kiln, Cement Plant Machinery, Pulp Making Machine., Paper Mill Plant

Tunnel Kiln

Cement Kiln, Cement Plant Machinery, stainless steel chimney

ceramic kiln

Rotary Kiln, Ball Mill, clinker cooler, Head Box, paper plant, pre heaters

Gas Fired Kilns, Industrial Sheet Metal Job Work

brick kilns, sand suppliers, cinder calcium carbonated