Laboratory Apparatus Dealers in Vastral, Ahmedabad

The company is nonpareil Manufacturer and Supplier of COD Digestion Apparatus (HSW154) from Gujarat. COD Digestion Apparatus we make available are widely sought after in laboratories, pharmaceutical industries and allied segments. Excellent quality, high durability and reliable performance are some of the attributes of the COD Digestion Apparatus.Specifications : Consists of a reaction vessel of 38-40mm Supplied with 15 Glass Reaction vessels Fitted with 15 air condensers Supplied complete with a stand which can accommodate 15 Vessels Can be operated on 230 volts, 50 Hz, and single phase Major Features : Provision for 15 Samples Fitted with a digital micro processor PID Controller having a timer For 2 Hours and also a buzzer Consists of a reaction vessel of 38-40mm We are also MFG By 6, 9, 12, 18, 21, 24, Sample COD Digestion Apparatus We are also MFG By GMP (Complete S.S.)

• Dimensions: Cm.
• Bottom diameter Top diameter Height: 20 10 30

Introduction The oldest, most widely used test for determining workability. This test is used to determine the workability of fresh concrete, which would normally be undertaken at the point of delivery to ensure the concrete, is of adequate consistency for placement. The test is applicable to concrete of medium workability.     The device is a hollow cone-shaped mould. The mold is filled in three layers of each volume. Each layer is rodded with a 16mm steel rod 25 times. The mould is then lifted away and the change in the height of the concrete is measured against the mould. The slump test is a measure of the resistance of concrete to flow under it own weight.   General Descriptions & Specifications The apparatus comprise of a slump cone with handles made of mild steel sheet, a chrome plated steel tamping rod of 16 mm diameter X 600 mm long, rounded off at one end, with a scale marked on it and a steel base plate with a carrying handle.     The mould for the test specimen will be in the form of frustum of a cone having the following internal dimensions as follows   The Cone is constructed of metal of at least 1.6 mm thickness and the top and bottom are open and at right angles to the axis of the cone. The mould have a smooth internal surface and provided with suitable foot pieces to a base plate and also handles to facilitate lifting it from the moulded concrete test specimen in a vertical direction as required by the test. The base plate is provided with cleats & swivel handle.   Optional Accessories CONCRETE SCOOP.FUNNEL FOR POURING CONCRETE IN CONE STRAIGHT EDGE

• Display: Digital
• Phase: Single Phase
• Voltage: 220 V
• Brand Name: Voltriqs
• Temperature: 150 Degree C
• Power: 500W
• Accuracy: +-5%

Mett-Bio Metallurgical Testing & Services with its state of the art equipment setup consisting of Salt Spray Chamber Complying to the Requirement of ASTM B 117/ ASTM G 85.   Tests are performed in our ISO 17025:2005 NABL accredited lab under the standard Specified conditions or as per specific field conditions.   Salt spray testing is a test method where in a product or coatings resistance to corrosion is evaluated in severe corrosive conditions with extended exposure to a saline or salted spray   This testing is carried out in a closed chamber which is filled neutral salt fog. The test specimen is exposed to a predetermined time period and inspected during its exposure. This test is carried out to check the integrity of coatings, paints in a corrosive environment. This test is carried out as per ASTM B117.   Types of Salt spray testing:   · Neutral Salt Spray (NSS), · Acetic acid Salt Spray (ASS), · Copper sulphate Acetic Salt Spray (CASS)   The salt spray test can be acclimatized to suite different corrosivity level to simulate different environments.   The test specimen is exposed to a predetermined time period and inspected during its exposure. This test is carried out to check the integrity of coatings, paints in a corrosive environment. This test is carried out as per ASTM G 85.   A standard 5% salt solution of sodium chloride known as NSS or neutral salt spray and a solution of acetic acid known as ASS. The solutions are chosen based on the type of coating to be evaluated   Other salt variations: SO2 / Calcium Chloride (CaCl2)

(Castor Oil Penetration) APPARATUS (As Per IS 2046:1995) is specifically designed for Castor Oil Penetration of Crape paper for Decorative Laboratory Testing application. CONSTRUCTION The system is consisting of 2 Parts. (1) CASTOR OIL CONTAINER ASSEMBLY. (2) DIGITAL CONTROL PANEL. TECHNICAL SPECIFICATION OF CASTOR OIL CONTAINER ASSEMBLY The Castor Oil Container Assembly is made of STAINLESS STEEL having â�¦â�¦.. -Spring Holding Sample System. - Manual Stirrer Built-in. P. T - Pt-100 sensor. - Micro-switch. - Heater with insulation. - Container inclined mechanical device & - Water cooling circulating Coil built-in. The entire container assembly is kept in Stainless Steel Tray. TECHNICAL SPECIFICATION OF DIGITAL CONTROL PANEL The Control Panel is consisting of following. - Mains Switch. - Mains Indicator. - Digital PID Controller. - Heater ON Indicator. - Alarm Indicator i. e. for Water circulation through cooling coil, if required. - Digital Micro time Totalizer having Resolution is 0.001 Sec. - On the back side of the panel, Johnson connector is provided. - Socket for Pt-100 Sensor. - Mains Cable. - SSR & Fuse is built-in the panel. TECHNICAL DATA - Digital Timer Range : 999.99 Sec. - Resolution : 0.01 Sec. - Temperature Control : Digital PID - Sensor : Pt-100 - Temperature Range : 37�° C + 1�° C - Temperature Resolution : 0.1�° C - Cooling : By Circulating cold water

• Brand Name: KJ
• Triaxial Cells: 38mm and 50mm dia
• Size: 50 Kn ( 5,000 kgf )
• Digital Timer And Counter: YES

• Type: Furnaces
• Material: Iron,Stainless Steel
• Certification: CE Certified
• Application: Heating Process,Laboratory
• Weight: BELOW -100 KG
• Color: White
• Voltage: 220V,440V
• Condition: New
• Power: 3-6kw,6-9kw
• Driven Type: Electric
• Warranty: 1yrs
• Country of Origin: India
• Automation Grade: Automatic

• Strainer Size: 0-15Inch
• Type: Industrial Strainers
• Shape: Round
• Mesh Size: 149 Micron
• Usage: Industrial Use
• Grade: DIN
• Color: Silver
• Handle Material: Aluminium, Metal, Plastic, Stainless Steel
• Technics: White Zinc Plated
• Brand Name: IFP

• Material: Mild Steel
• Display: Digital 3 1/2 Digit, Bright LED
• Weight: 5 Kg (approx.)
• Model: 244/MICRO
• Usage/Application: MELTING PURPOSE
• Brand Name: LALCO
• Automation Type: Automatic
• Dimensions: L 405 x B 360 x H 235 mm (approx)
• Power: 230V + 10?, 50Hz
•  :  

• Output kg / hour: 1 to 10 kg/hr Depends on sieve and product
• Screen Diameter: 300 mm

Laboratory sifter its high capacity and compact size, is suitable for processing small batch of pharmaceutical materials and in research of pharmacy colleges, research and development laboratories.It is designed on the principle of 'Gyratory Motion". The material is fed on to the centre of the screen and then travels on a spiral path to the periphery whilst the fine particles fall through. The material being screened is therefore drawn apart automatically and no additional force is exerted to separate coarser particles. The sieving is done gently and with little abrasion.

• Power: Electronic
• Port: India
• Brand Name: Standard Steel
• Place of Origin: Haryana, India
• Supply Ability: 100 Piece/Pieces per Month

MK 01060 - California Bearing Ratio Apparatus (C.B.R. Machine) The CBR test is used for determining the relative bearing ratio and expansion characteristics under known surcharge weights of base, sub-base and sub grade soils for the design of roads, pavements and runways. Tests can be conducted on all types of soils including sand, gravel and washed stone (passing through 20 mm IS Sieve). The CBR test is used extensively in selection of materials and control of sub grades. The procedure consists of loading soil with a circular piston, 50 mm dia face and maintaining a penetration rate of 1.25 mm/min. The load is noted and the results of test on natural or recompacted soils, in soaked and unsoaked conditions, can be compared with standard test results. The Apparatus Consist of following:- Load Frame, 50kn ( 5000 kgf) Mould 150mm ID x 175mm high Perforated Base Plate Extension Collar, 150mm ID x 50mm high Penetration Piston, 50mm face dia Adjustable Bracket, for Penetration Dial Gauge Circular Metal Spacer Disc Annular Metal Weight, 2.5kg, 147mm dia with 53 mm dia central hole Perforated Metal Weight 2.5 kg. 147mm dia, with 53mm dia soft Perforated Plate, 148mm dia, with adjustable stem and lock nut Metal Tripod for Dial Gauge Cutting Collar Rammer 2.6kg, 310mm controlled drop Rammer 4.9kg, 450mm controlled drop Proving Ring Capacity 50 KN Dial Gauge, 25 mm travel, 0.01mm least count.

Strainers are a critical component in any steam, liquid or gas system. REX SY-Series strainers are designed to remove pipeline debris, such as rust and pipe scale. Strainers will protect components such as valves, temperature and pressure regulators, steam traps, pumps, meters, burners nozzles and other process equipments from possible damage and help ensure that heat transfer surfaces are kept free from deposit build up. REX offers a full range of strainers in a variety of sizes, configurations, materials and screen openings to meet the bulk of all pipeline straining requirements. They are effective, inexpensive insurance against costly shutdowns and heavy maintenance cost. DESIGN FEATURES / BENEFITS A complete range of sizes and materials suitable for a wide range of applications and services. Large screen area for maximum dirt holding and minimized pressure drop. Various screen options for optimum system and component protection. No leak & no crush screen chamber. Precise machining of both ends of the chamber provides perfectly round and smooth seating surfaces as well as fixed chamber length. REX strainer are economically priced so that each piece of pipeline equipment can be protected.

• MODEL: Bhagwati -12"
• Output kg / hour: 1 to 10 kg/hr Depends on sieve and product
• Screen Diameter: 300 mm
• Electric Motor: 0.25 Hp / 0.18 Kw
• Charging height: 1125 max. approx
• Discharging height: 843 max approx

APPLICATION & PROCESS : The Laboratory Vibro Sifter, due to its high capacity and compact size, is suitable for processing small batch of pharmaceutical materials and in research of pharmacy colleges, research and development laboratories. The machine is embedded with complete S.S. Fabrication structure fitted with Vibro motor and 12" Sieve and movable on 3 Nos. castor wheel for easy movability. It is designed on the principle of 'Gyratory Motion". The material is fed on to the centre of the screen and then travels on a spiral path to the periphery whilst the fine particles fall through. The material being screened is therefore drawn apart automatically and no additional force is exerted to separate coarser particles. The sieving is done gently and with little abrasion. NEW DESIGN FEATURES : Design is cGMP - Current Good Manufacturing Practices compliance. All contact parts AISI 316 & non contact parts AISI 304. Easy Movability Noiseless and Maintenance free. Low power consumption. High Operating simplicity for easy cleaning of contact parts. Easy accessibility for setting, maintenance and cleaning. Available vide range of sieve.

We are passionately engaged in offering an exclusive range of Salt Spray Test Chamber. These test chambers are inspected by a team of vendor’s quality experts against various quality parameters so as to dispatch a flawless range. We provide these test chambers in different specifications as per the variegated needs of our clients. Besides this, our given test chambers are highly acclaimed among our customers for its long lasting performance.

• Weight: 50 KG
• Material: MS
• Automation Grade: Manual
• Color: Blue
• Usage/Application: LABORATORY CONCRETE
• Diameter: 16 mm
• Model Name/Number: DM
• Thickness: 6.5 - 9 mm

We are offering y type strainers. With well-developed manufacturing facility to back us, we bring forth assorted range of y type strainer valve. The y type strainer valves are designed under strict quality control in accordance with the industry set norms. Buyers can acquire y type strainer valves in a variety of specifications from us. We are a well-reckoned name as y type strainer valve manufacturer, exporter and supplier in gujarat, india. standard features y-type/basket type stainless steel wire mesh over 4 times filtration area details optional features : double mesh size : from 1” to 12” ansi class : #150 to #300 material : all grades of carbon steels, stainless steels and alloy steels ends : flanged and butt-weld ends.

• Brand Name: Shrey
• Off white: Coffee

We are a renowed manufacturer of universal diamete apparatus mechanical comparator gauge spinn gauge spin mechanical comparator ud apparatus ud mechanical comaparator spinn universal diameter apparatus for measurement of various parameters like: outer diameter of ball bearing, inside diameter of ball bearing outer diameter of taper roller bearing, inside diameter of taper roller bearing outer diameter of spherical roller bearing, inside diameter of ball bearing squareness to end face, ovality of bearing inner and outer thickness.

• Weight: 1.5 Oz (43 G)
• Accuracy: +/- 0.25% of full scale,±1°F (±0.5°C).
• Power: Electronic
• Temperature range: -55
• Analog Channel: 4
• Data: Analog & Digital
• Scan Time: 125 ms Internal Processor

The Triaxial shear test apparatus shall confirm with the requirements of IS: 2720 (Part 11) and (Part 12) and are made from corrosion resistant material.The Triaxial compression test, is used to simulate all combinations of practical stress and strain conditions, occupies at present a fairly dominant position in soil testing.   Features : Load Frame , Mototrized, 12 speeds, 50 Kn ( 5,000 kgf ):-(IS:2720(Part 11) and (Part 12)Load frame consist following features:Two pillar type, Detachable Frame, Enclosed Motor and Gear system, Jewel Lamps Indicating direction of motion, speed chart, operational ease, useful for both Triaxial and CBR Tests. The Load Frame consist of a cabinet which can house the gear system and motor with sturdy angle iron frame. The loading is done through the bottom loading platen, which is carried on a lead screw, which advances upwards. The top load bracket, which slides over two upright pillars, can be made positioned at any desired height and should be lockable. It should carry a screw adapter for standard proving rings. The loading part of the unit should be detachable from the main unit for ease of transport and to avoid damage to the tension rods. Load frame should having following strain rates: 12 speeds (between 0.0064 mm / min and 1.25 mm/min.)It should be suitable for operation on 220 V, 50 Hz, single phase, AC supply.

This Furnace is used in different types of Laboratory experiments. This Muffle is well known in dental laboratory. Inherent features of this product are : Robust MS shell to withstand continuous operation. Heating elements operating on low surface load for longer elements life and continuous trouble free furnace operation. Refractory and insulation of high quality bricks / ceramic fiber for energy conservation. Heat loss prevention by Ceramic Fiber rope for door. Perfect temperature uniformity in the furnace useful space. Automatic temperature control by digital controller. Electrical switch gear items of reputed make, along with controller housed in aesthetic control panel. Safety interlocks and protection devices for safe furnace operation. Areas of application : Used in Heat Treatment, Laboratory Experiment, and Dental Laboratory Experiment based Applications Chamber Sizes Available in 3 sizes (9” x 4” x 4”) (10” x 5” x 5″) (12″ x 6″ x 6″) Heating Medium : Electrical Temperature Ranges : Up to 1000°C Control Panel Thyristor based Power Control Panel. Temperature Based Power Control Panel.

• Material: Stainless Steel
• Usage/Application: Pump

The Equipment is known as Digital Density Test Apparatus, Digital Automatic Tap Density Test Apparatus, Digital Plastic Density Apparatus, Smoke Density Test Apparatus, etc.  

• Features: Tamper proof, High durable, Safe
• Dimensions: 1030 * 940 * 1350
• Normal Steel: 114 mm * 3 mm
• CATEGORY: Outdoor Gym Equipments

digital ecg machines, computerised strees testing machine, bed side monitor

Medical Equipment, Ophthalmic Instrument