Laboratory Autoclave And Sterilizers Dealers in Ellisbridge, Ahmedabad

• Brand Name: STERIMAC INDIA
• Material: Stainless Steel
• Automation Grade: Fully Automatic
• Temperature Range: 37 To 55 Degree Celsius
• Approval Certificate: Approval Certificate
• Pressure Range (psi): -0.9 To -0.25 Kg/Cm3
• Accessories: Gas Cartridge,Sealing Machine And Sealing Roll
• Installation: Yes
• Model: VA-01
• Size: As per client's requirement
• Feature: High performance, Longer service life, Sturdy construction

We are dealing in best Instant Electric Water Heater.

• Power: 1800
• Voltage (VHZ): 220/50
• Capacity L: 18
• Chamber mm: 247 x 350
• Outer Size mm: 480 x 590 x 405
• Net Weight kg: 45

B Standard win 3 time pre vaccuum preceding vacuum drying 105 C Rubber and Plastic disinfection prgoram Sterlization temperature : 121 C or 134 C Unique solution for cotton sterllization cycle Special Sterlilzation program: HIC, HBV, BSV, Liquid Cycle It is installed with Bowic & Pick Measure Sterilization and drying time adjustable help you to get the best Sterilization effect With open water tank easy to clean LCD Display you can observer the working cycle easily and cleaning Mini Printer is available which can be attached to record the process of sterlization Automatic malfunction deecting system

• Type: Water Heaters
• Usage: Boiling Water
• Color: Blue, Brown, Green, Grey, Light White
• Voltage: 110V, 220V
• Condition: New
• Operating Type: Automatic, Fully Automatic, Semi Automatic
• Warranty: 1year
• Energy source: Electric

We are the main supplier of this product.

• Usage: Cement Testing Machine
• Power: Electronic
• Port: Gujarat, India
• Model Number: TM 26

After it has set, cement must not undergo any appreciable expansion, which could disrupt a mortar or concrete. This property of soundness is tested by subjecting the set cement to boiling in water or to high-pressure steam. Unsoundness can arise from the presence in the cement of too much free magnesia or hard-burned free lime   This method covers determination of the autoclave expansion of Portland cement by means of a test of neat cement paste specimens, 25.4 X 25.4 X 285.8mm, which are moist cured for 24 hours +/- 1-1/2 hours and then exposed to action of steam under specified pressure for 3 hours. The rate at which pressure is increased in the beginning the test and released in the test are specified. Linear expansion is measured by micrometer comparator.   Standard Accessories: Special rack to hold specimens above water level in the autoclave and in vertical position Pressure gauge with calibration report with national traceability Silicon rubber Gasket Spanner Accessories At Extra Cost: Length comparator with dial micrometer 0.002mm X 5mm shrinkage bar moulds(single/two/triple gang) PID Auto tuning Digital Temp. indicator cum controller with or without PC interface for data logging PID Auto tuning Digital Pressure indicator cum controller with or without PC interface for data logging Spare heater set Spare Silicon Gasket Spare Pressure gauge Spare safety valve

Industrial immersion heater are used for boiler vessels , water bath , antiglare dishwasher, kettle humidifiers , steam tables , hotel /hospital canteen , circulating water tanks etc

• Model Number: EIE

We are offering Automatic MICROPROCESSOR controlled Radial Locking System · With inner chamber and middle chamber & outer cover made of stainless steel. Fitted with industrial elements. Fitted with low water level cut-off, Microprocessor controlled, Fully automatic sterilizing operation with provision for programming temperature and Time ramps. Displays current temperature and set temperature with time remaining Microprocessor controller auto air purging and auto steam exhaust at the end of the cycle. The controller provide to just one button to cycle the unit from start to finish with alarm.

Introducing a new electrical autoclave, with well equipped in infrastructure and team of experienced workers, we have been capable to serve our clients by offering high quality industrial autoclaves, absolutely in tune with their requirements. Use of premium grade material and state-of-the-art technology provide our products an incomparable identity. Our range of robustly constructed industrial autoclave is widely used in medical, pharmaceutical and agriculture industry. Our range consists of vertical autoclave, laboratory autoclave, medical autoclave, pharmaceutical autoclaves, sterilizer pressure cooker, high pressure sterilizer, laboratory sterilizer etc.Technical data:Ÿ Double walled construction outer M.SS.S. 304 & InnerŸ Lid made of S.S 304 heavy gauge die pressed, with handle, and tightening deviceŸ Equipped with pressure gauge, steam release valve & 2 Safety valveso o Ÿ Working Temperature: Ambient to 135 C, Accuracy: +-0.5 at 121 CŸ Controller: Microprocessor PID Multifunction controller (Adjustable)Ÿ Timer: Up to 12 hours2 o Ÿ Work pressure: 2.0KG cm at 132 C Gauge: 0-4Kg cm2Ÿ This instrument is supplied with S. S. perforated basketŸ Fitted with silicon rubber gasket joint lessŸ Power required is 230 Volts 50 Hz• Foot lifting arrangement to open lid

• Yellow Color: Includes tongs
• Low energy consumption: Optical and acoustic signal

Quick and highly effective With LED display to indicate the remaining sterile time Disinfects up to 6 bottles in 7 minutes Contents remain sterile for 3 h if lid remains closed Elimination of all harmful bacteria without any chemical additives Optical and acoustic signal Includes tongs Cable rewinder Automatic switch-off Low energy consumption (220-240V) Measurements: ø 22.5 x 33.5 cm Weight: 1228 g

Bonzer Flat and Gusseted Reel is made with Medical Grade Paper and Transparent MultiLayer PET/PP Copolymer Film. The Inks used are water based. It is used for ETO and Steam Sterilization. 

Technical Specifications Completely made of Stainless steel/Aluminum material. Fitted with pressure gauge and safely valve Safety valve is adjusted to blow off the seam at 12 PSI Maintaining constant pressure of 15 PSI ISI Marked Dimension : 30 x 30, 30 x 35, 30 x 55, 30 x 60 Fitted with Digital controller to control pressure/temperature with temperature display indication. Factory set at 121 °C (15 PSI) along with built in digital timer adjustable for maintaining sterilization cycle time with auto cut off system. Supplied with control panel, mains on/off switch, voltmeter, ammeter.

MTECH specialize in the Safety Valves, Safety Relief Valves and Relief Valves. We offer our safety valves, safety relief valves and relief valves to a number of industries including, but not limited to Chemical, Petrochemical, Refining, Power, Pulp and Paper, Oil and Gas, Sugar, Hospitals and Colleges worldwide. In addition to servicing our local and national markets with our safety valves, we also have a business presence established in Europe, Australia, Mexico, Middle East and Latin America. Regardless where you are located, we can provide a safety valve to suit your needs.

Enables filtration, pre-heating, dearation, and precise dosing of media in the vessel within the dissolution bath, 21 litre media tank capacity allows filling of dissolution vessels for upto 3 dissolution tests (n=6), Batch degassing ensures inter-vessel degassing consistency Volumetric dispensing with an accuracy better than 1% as per USP, FDA and Ph. Eur. requirement, Special nozzle design allows the handling of surfactant and frothing media like Sodium Lauryl Sulphate (SLS), Programmable deaeration time, temperature and vacuum for effective deaeration of different media, Maintains media under vacuum at desired temperature while in idle condition, Virtually zero dead volume minimizes wastage of media, Programmable dispensing volumes from 200 ml to 4 ltrs, Fast filling of dissolution vessels at a dispensing rate of 900 ml min, Programmable rinse and cleaning cycle allows the instrument to run through a prevalidated self cleaning procedure, On- board memory stores 10 batch information of degassed media, Unparalleled versatility due to 1 ml volume change increments, 360 turning radius allows it to be maneuvered in tight places, Multifunction single hose for dispensing, aspirating, cleaning, rinsing and draining ensures no lifting of heavy media tanks, Ergonomically designed nozzle with embedded dispense switch for ease of operation, User friendly validation and calibration of media volumes.

• Certification: ISI Certified
• Application: Gas Fitting, Oil Fitting, Water Fitting,INDUSTRIAL
• Pressure: High
• Feature: Casting Approved
• Warranty: 1 Year
• Structure: Safety

We are offering Safety Relief Valves Conventional ,High & low Pressure Threaded with close & open Bonnet and with cap or lever, Pilot Operated safety relief valve

Chemque is a well known supplier and exporter of Sterilization Tyvek Flat Reel. Our Sterilization Tyvek Flat Reel is made from high quality 1073BTyvek. Besides, we provide Sterilization Tyvek Flat Reel on the market leading prices. Attributes : 2 Sides sealed with Multilayered Laminated Cast Poly PropleneAvailable with and without EtO & Colour changing Chemical Indicators of SteamLong Lasting lifeSpecially made with 1073BTyvekLabel Printing on special request of the clients Obtainable Sizes in Widths : Length of : 200 MetersWidth of :5 Cm7.5 Cm10 Cm15 Cm20 Cm25 Cm30 Cm35 Cm40 Cm

Girish Electrical Industries manufactures 'Girish Heat' brand alkali immersion heaters. These are made of chrome nickel sheathed heating element brazed to CI junction box for mounting on side of the vessel. 

• Condition: New
• Temperature: 100 - 300 Degree C
• Insulation Wall: Single Wall
• Automation Grade: Automatic

CPAC Equipment Inc. (CEI) is the largest manufacturer of Class II, dry heat sterilizers for the medical, dental, and ophthalmology markets. Dry heat sterilizers are the preferred method of sterilization for instruments that may rust, dull or corrode when sterilized with steam sterilizers. CEI offers the COX Rapid Heat sterilizer using a six minute cycle time or the Steri-Dent dry heat sterilizers. These sterilizers are ideal for general dentistry, orthodontic practices, ophthalmology, cosmetology, tattoo and pharmaceutical applications.

Sensus Metering Systems safety relief valves offer an economical installation for large large relieving capacity applications such as gas distribution systems, metering sets, and industrial applications. The Model 250-S and 250-DW are angled body safety relief valve with a large exit area for a high flow rate. They incorporate a deep molded diaphragm that provides maximum lift while not affecting initial relief.   The Model 257-S features the same "roll-out" diaphragm principle with a double ported single valve that has achieved such remarkable success in the widely used 441-57S and 461-57S regulators. The roll-out diaphragm is a combination of strength and flexibility in which diaphragm action is constantly matched with spring action. This design offers large capacity, tight seat and reseat, sturdy construction, no adjustments, and easy servicing

• Working Temperature: 121 deg.C
• Working Pressure: 1.26 Kgf/cm2 (15 psi
• Hydro Test Pressure: 2.5 Kgf/cm2 (35 psi)

Contsrtuction The unit has outer chamber, inner chamber, Boiler, Lid and Jacket - all made of AISI 304 grade stainless steel. For controlling sterilization cycle, a three way valve or a multiport valve - made of S.S. is provided. The unit have a very efficient ms radial locking arrangement, fitted on ms ring, duly chrome plated. It is supplied complete with vaccum breaker, water level indicator, steam trap and automatic pressure control switch. The whole unit is mounted on a robust tubular ms stand. Operatable on single / three phase, 220/440 volts, 50Hz A.C. Supply. Mode of Heating Electrically heated by special flange type / immersion type heaters bearing ISI mark, to work on single / three phase, 220/240 volts, 50Hz, A.C. supply. Working Pressure The pressure inside the chamber is variable from 5 psi to 20 psi. But the normal recommended pressure for sterilization process is 1.2 Kgf/cm2 (15 psi). Optional Accessories Semi Automatic Pressure Control Switch. Automatic Low Water Cut Off Device Mechanical Timer (0-60 Min) Mechanical Timer With Alarm System Solid State Digital Timer (0-120 Mins) Solid State Digital Temperature Indicator. Micro-Processor Based Programmable Timer Controller. Micro-Processor Based Programmable Timer (0-120) Circular Temperature Chart Recorder (24 Hours/Seven Days) Strip Chart Recorder Digital Pressure Transducer Cum Indicator Automatic Pressure And Temperature Mapping System With Validation Soft Ware (Without Pc) Spare Heaters (In-house custom Developed SS Heaters) 2 KW3 KW4 KW

• Brand Name: Aeroflon Engineers Private Limited
• Application: Industrial
• Compressor Type: Screw Compressor
• Diameter: 2mm
• Grade: 304
• Packaging Type: Box

• Material: WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel
• Inlet Size: 1" x 2" through 10" x 12" ANSI Flanged
• Inlet Rating: ANSI Class 150# to 2500#
• Orifice Size: Sizes D Through T
• Temperature Range: -450º F to 1500º F
• Pressure: 5 to 6500 PSIG

Spring loaded safety relief valve Full lift pop type design Open bonnet with cap & liver Close bonnet with liver Close bonnet with cap Close bonnet with packed liver Metal seat Stallited nozzle & dics Soft seat with PTFE & Viton Bellows seal safety relief valve

motorized safety control valves, Control Equipments, Flame Detectors

sterilizers, Hospital Equipments, Hydraulic Operation Table

We deals in supplying of wide range of Safety valve.

Safety Valve, Precision Components, Precision Engineering Parts

Water Heater, Air Coolers

Eto Sterilizer

Safety Valves, Ball Valve, Butterfly Valve, Industrial Valve

Water Heater, Solar Water Heating System