Laboratory Autoclave And Sterilizers Dealers in Krishnanagar, Ahmedabad

• Features: Made of soft yet strong SMS fabric, High barrier and durability to maintain sterility, Stands up to handling, Easy wrapping and unwrapping, Compatible with major sterilization processes.
• Product Code: 06J01

• Brand Name: DM
• Shape: Vertical
• Chamber Volume: 10-15 Litre
• Material: Stainless Steel
• Insulation Wall: Double Wall
• Automation Grade: Fully Automatic
• Usage/Application: Laboratory
• Power Consumption: 2 KW

Silent Features: Rust proof stainless steel pressure vessel Specially designed Steam Safety Valve, pressure control switch and Temp. control switch – Triple Safety precautions for operator safety Accurately Calibrated Pressure Gauge Guaranteed timings and performance as per IS 4031   General Descripation & Specifications:The Autoclave is double walled. Inner boiler chamber of stainless steel cylinder, with concealed yet easily replaceable heaters surrounding the vessel for quick heating. The boiler lid is of thick stainless steel and can be bolted to the chamber by heavy hexagonal nuts. The silicon gasket, seated in a groove, makes the unit leak proof even at high pressure. The boiler is mounted in between the strong angle iron frame and covered with CRC sheet – attractively powder coated. The outer cover can also be of Stainless steel at an extra cost. The gap in between the walls is filled with thermal insulation to prevent heat loss and energy. The control system consist of sensitive pressure regulator, pressure gauge, safety valve, temperature control switch, power ON-OFF switch and pilot lights to indicate status of the electric heating units and control switches.   Standard Accessories: Special rack to hold specimens above water level in the autoclave and in vertical position Pressure gauge with calibration report with national traceability Silicon rubber Gasket Spanner   Accessories At Extra Cost: Length comparator with dial micrometer 0.002mm X 5mm shrinkage bar moulds(single/two/triple gang) PID Auto tuning Digital Temp. indicator cum controller with or without PC interface for data logging PID Auto tuning Digital Pressure indicator cum controller with or without PC interface for data logging Spare heater set Spare Silicon Gasket Spare Pressure gauge Spare safety valve    

• Packaging Type: Carton Box
• Usage: Laboratory Use, Industrial Use
• Specialities: High Quality
• Type: Vertical Autoclave
• Material: Mild Steel
• Shape: Vertical
• Color: Grey
• Condition: New
• Pressure: High Pressure
• Warranty: 1 Year
• Country of Origin: India
• Operating Mode: Fully Automatic
• Application: Laboratory Use

In the realm of suction technology, our suction pump for medical use stands out for its precision and efficiency. Crafted exclusively for medical applications and for hospital use, it promises reliable and seamless operation. Technik Spirits Inc. are manfuactuers of Medical Vacuum Systems with both - Traditonal reciprocating type vacuum pumps and the next generation Rotary Vane type Medical Vacuum Pumps.

• Certification: CE Marked
• Power: AC 220V / 50Hz
• Features: Portable design for low bench space,5 to 20 liters of chamber capacities,No specific installation required,Simple to use, just plug and operate,Aluminum or stainless steel construction,Fast sterilization approx. 20 min,Over pressure protection
• Operating Pressure: 15 PSI / 18 PSI
• Sterilization Time: 1 to 0.99 Minutes
• Construction: 304 Grade Stainless Steel / Aluminum
• Heating: Electric Heating, Optional Non-electric (Gas)
• Safety: CE Marked Pressure Valves,Lid Locks, Steam & vacuum release valve

• Size Range: 15 mm TO 200 mm

Safety Relief Valve represent the most advance technology in value designed for use in intermediate power boiler and organic fluid vaporizer service. Built in conformance to section I of the ASME boiler and pressure vessel code, all capacities am certified by the national board of boiler and pressure vessel inspector at 5% over pressure.

• Conveyor Width: 300mm, 450mm, 600mm, 750mm, 900mm & 1200mm
• Tunnel Types: Sterilizing &Depyrogenation
• Use for Sterilization: Glass Ampoules, Vials & Bottles
• Total Zone: Pre Heating Zone, Sterilizing Zone, Cooling Zone
• Output: Depends on belt size
• Conveyor Height: 900mm +/- 15mm
• Working Direction: Left To Right
• Power Consumption: Depend on tunnel model or size
• Dimensions: Depend on tunnel model or size

Harsiddh Engineering Company, being leading name in the manufacture and export of pharmaceutical packaging machinery provides excellent decontamination and sterilization equipments. Our specially designed equipment is used in sterilization and depyrogenation of ampoules, bottles and vials. The machine comes as a complete unit with in-feed system, preheating and sterilizing zone, cooling and exit feed mechanism. As the bottles and vials move along the conveyor, they are sterilized. The equipment receives materials from up line washer and these are directed to the drying zone. At this zone, hot air vaporizes the washing moisture and preheats the bottles. They then move to the hot zone where they undergo sterilization and depyrogenation through heating. They are then subjected to cold air which cools them off before entering aseptic region. Our machines have CE certification. Our sterilization machines uses advanced instrumentation and control topologies to effectively moderate heat, water, air and other materials. Temperature sensors regulate heating and cooling while pressure gauges regulate the system pressure. The conveyor belt speed is also carefully controlled. In addition the system has an advanced PLC control module that monitors and regulates all processes.   Silent Features     Repetitive accuracy in reduction of endotoxin count. High productivity due to reduced idle time and optimization of operating time. Infinitely variable speed to achieve optimum production. Swift and convenient to use machine. Intelligent logic control systems for controlling temperatures in heating and cooling zones. Complete closed loop systems for heating zone and cooling zone. Important parameters are password protected. Graphics for displaying and editing various procted. Accurate data logging on to printer and recording onto strip chart recorder (optional). Auto shut down after batch completion Automated Self Sterilization of the cooling zone using Dry Heat Documentation available for qualification, validation Full PLC controlled and reliable depyrogenation process Double wall asbestos free ceramic wool insulated re circulatory module containing high temperature EU – 13 grade final HEPA filter with suck back mechanism suitable for 300 °C continuous repeated cycle. This zone provides uniform hot air over the glassware for the Purpose of de pyrogenation. In this zone the temperature raises as quickly as Possible by the help of heating element, without inducing cracking due to excessive thermal stress. The glassware remains in this zone at a required time period to meet The specified endotoxins reduction generally > 3 log scale. This section consist of unidirectional hot air flow unit with turbine blower assembly, High temperature HEPA filter (up to 350 °C) and heater bank assembly. Integrated temperature sensors are provided for monitoring & controlling purpose of Temperature inside the sterilizing zone. For this purpose one sensor is placed above The HEPA filter and the sensor is placed at the entry side of sterilizing zone. For Extra precaution one temperature sensor provided at Heater Assembly ( 375 °C) is placed for protection of Heaters. The entry and exit side of the sterilizing zone consists of manually adjustable profile Plates resulting in maximum temperature uniformity and ensure consistent result for Glassware with varying sizes.

• Insulation Wall: 125mm (t) Mineral Wool. A grade mineral wool insulation to optimize heat effectiveness and stop heat loses.
• Finishing: All stainless steel components buffed to matt finish.
• Insulation Wall: 125mm (t) Mineral Wool. A grade mineral wool insulation to optimize heat effectiveness and stop heat loses.
• Finishing: All stainless steel components buffed to matt finish.
• Temperature: Up to 250°C
• Material of Construction: Interiors with 14 gauge S.S. 316 quality sheets. Exteriors with 16 gauge S.S. 304 Quality sheet. Frame work of Rolled steel sections 6, 5 & 3mm. the interior frame work of S.S 316 quality
• Trolley: Fabricated from AISI SS 316 Quality angles & flats with ‘U’-Grooved Stainless Steel wheels.
• Transfer trolley: Fabricated from S.S. 304 Quality Angles & flats with castor wheel for sterile & Non-sterile room.
• Doors: Two Doors, one opening into the sterile room and the other into the Non-sterile room. The doors are lined with silicon rubber for sealing. The door in the sterile room is claded with 16 gauge AISI SS 304 sheet.
• Interlocking: To maintain the barrier between the sterile and non-sterile room, both the doors are pneumatically interlocked. The pneumatic system consists of pneumatic Cylinders, solenoid valves and flow control valves.
• Air recirculation: A 2 H.P. 1440-RPM motor drives the impeller. Air enters the Chamber through perforations provided passes horizontally over the charge and is re-circulated.
• HEPA Filter Module: Air entering the system is passed through a HEPA Filter Module consisting of a pre-filter up to 5 microns, a blower & a HEPA Filter up to 0.3 microns. The filtered air is fed to the impeller for circulating in the system.
• Temperature Control & Timer: A combined Electronic Digital Controller & Timer is installed. ±2ºC., one probe centrally mounted.
• Scanner: A six point Digital Scanner is incorporated, with facility of Hold & Scan at all six points.
• Temperature Recorder: A, 1 point Circular Chart recorder is installed with chart Dia. 8”
• Cooling Coils: Crimped Finned Tubes with headers, S.S. 304 Quality to speed up cooling cycle.
• Panel Board: Consists of: Ammeters, Voltmeter, Voltmeter switch, HRC fuses & Circular chart Recorder
• Control panel: Motor Starter, Contactors, Rotary Switches, Indicating lights for heating & Cooling cycle and phase indicating lights.
• Exhaust damper: Controlled by solenoid valve and is opened during the initial heat-up, shuts off and re-opens during cooling cycle.
• Fan: Dynamically balanced fan provided for hot air circulation to achieve uniform temperature
• Temperature: Up to 250°C
• Material of Construction: Interiors with 14 gauge S.S. 316 quality sheets. Exteriors with 16 gauge S.S. 304 Quality sheet. Frame work of Rolled steel sections 6, 5 & 3mm. the interior frame work of S.S 316 quality
• Trolley: Fabricated from AISI SS 316 Quality angles & flats with ‘U’-Grooved Stainless Steel wheels.
• Transfer trolley: Fabricated from S.S. 304 Quality Angles & flats with castor wheel for sterile & Non-sterile room.
• Doors: Two Doors, one opening into the sterile room and the other into the Non-sterile room. The doors are lined with silicon rubber for sealing. The door in the sterile room is claded with 16 gauge AISI SS 304 sheet.
• Interlocking: To maintain the barrier between the sterile and non-sterile room, both the doors are pneumatically interlocked. The pneumatic system consists of pneumatic Cylinders, solenoid valves and flow control valves.
• Air recirculation: A 2 H.P. 1440-RPM motor drives the impeller. Air enters the Chamber through perforations provided passes horizontally over the charge and is re-circulated.
• HEPA Filter Module: Air entering the system is passed through a HEPA Filter Module consisting of a pre-filter up to 5 microns, a blower & a HEPA Filter up to 0.3 microns. The filtered air is fed to the impeller for circulating in the system.
• Temperature Control & Timer: A combined Electronic Digital Controller & Timer is installed. ±2ºC., one probe centrally mounted.
• Scanner: A six point Digital Scanner is incorporated, with facility of Hold & Scan at all six points.
• Temperature Recorder: A, 1 point Circular Chart recorder is installed with chart Dia. 8”
• Cooling Coils: Crimped Finned Tubes with headers, S.S. 304 Quality to speed up cooling cycle.
• Panel Board: Consists of: Ammeters, Voltmeter, Voltmeter switch, HRC fuses & Circular chart Recorder
• Control panel: Motor Starter, Contactors, Rotary Switches, Indicating lights for heating & Cooling cycle and phase indicating lights.
• Exhaust damper: Controlled by solenoid valve and is opened during the initial heat-up, shuts off and re-opens during cooling cycle.
• Fan: Dynamically balanced fan provided for hot air circulation to achieve uniform temperature

• Item: Autoclave
• MOC: SA240 TP316
• Size: 1450mm ID X 13.26 Mtr Long, Shell-25mm Thick, Dish Ends-30mm Thick Hydraulically Tested at 55 Kg/Cm²

We deals in supplying of wide range of Autoclave.

• Chamber Width (mm): 450
• Chamber Height (mm): 450
• Chamber Capacity (Liters): 191

Mechanical removal of air initially from within the chamber with the use of a vacuum system ensures that no air-pockets hinder the steam penetration and hence the sterilization process. Steam Sterilizer for sterilization of varied Hospital equipment like gloves, linen, gauze, cotton, instruments, glassware etc. using standard 121°C & 134°C cycles which are pre-programmed in the memory of the PLC Microprocessor Electrical Steam-generator provided for all models up to a chamber volume of 1000 liters. Temperature uniformly and accurately maintained throughout the chamber to within ± 0.5°C of the Set Sterilization temperature. Air Filter: 0.01 micron clean air-filter for stabilization of the internal air-pressure from vacuum conditioChamber Width (mm) n. Door safety: Door is automatically locked when chamber is under pressure. For double door models, both doors will not open simultaneously to ensure sterile chain integrity.

• Material: SS
• Country of Origin: Made in India
• Warranty: 1 Year
• Brand Name: Laxmi
• Model Name/Number: LST- 750, LST 600, LST 750, LST 900, LST 1200
• Packaging Type: Wooden Box

We bring you an array of unsurpassed and incredibly performing hi-tech water heating appliances from the house of A.O.Smith -Jaquar through a combined pool of innovative technologies and energy efficient solutions. These Geysers (Water Heathers) with such extraordinary features have become a choice of modern homes: Dual glass coated heating elements for higher efficiency. Electronic controls and changeable colour panels for the better display & looks. High strength steel tank and blue diamond technology for best protection against tank corrosion and scaling. Puff coating that keeps water stay hot for a longer time. EWJ HSE-SCJ CEWHR EES EWJH

• End Connection: Screwed / Flanged.
• CONSTRUCTION OF MATERIALS: Stainless Steel 304/ 316, Carbon Steel/ Cast Steel
• Type: Spring Loaded
• PATTERN: Close Body/ Angle Type
• SEAT: S.S. 304/316
• TRIM: AISI S.S. 304/ 316,S.S. 410 13% Crom
• PRESSURE RATING: ASA 150#
• Size: 25 X 50 to 200 X 250
• SERVICE: Air, Steam & Organic Chemicals.
• Temperature: 425o C

• Material: Plastic,Plastic And Rubber
• Shape: Rectangular
• Packaging Type: Plastic Pouch
• Application: Hospital
• Brand Name: Bond Well

ivz Valves & Automation manufacturing range all Pressure Safety Relief Valves are designed as per API 526. They also conform to ASME Section – VIII. Dimensions of valves meet to API 521/521. Metal seated Safety Valves Testing is carried our as per API 527 for Set Pressure & Leakages. A Safety Relief Valve is a mechanical, self actuating, pop design, spring loaded angle type valve, which is being used for the automatic release (on a set pressure) of a substance from a Pressure Vessel, Boiler, Overpressure of Pipeline or any Industrial System when the Pressure or Temperature exceeds required limits. Pressure Relief valves also being used to Control the Pressure in an Industrial System, Process Pipeline or Pressure Vessel which can develop by a failure of equipment, instrument or process upset. Safety Valve also known by the name of Pressure Relief Valve (PRV) and Pressure Safety Valve (PSV). Other names of Safety Valves are Safety Relief Valve, Thermal Relief Valve, Relief Valve, Spring Loaded Safety Valve, Angle Type Safety Valve, Pilot Operated Safety Relief Valve and Low Pressure Safety Relief Valves. The difference in between Pressure Safety Valve (PSV) and Pressure Relief Valve is Pressure Safety Relief Valve have provided a manual lever with a cap to relieve the pressure in case of emergency. Mostly two types of protection encountered in Industries which are Flow Protection & Thermal Protection. Flow protection is done by the using of Safety Relief Valves and Thermal Protection by Thermal Relief Valve. Safety Relief Valve Application Oil & Gas Application Chemical & Petrochemical Plant Boiler & Steam Pipe Line Power Plant Thermal Relief Application Fertilizer Plant Pressure Vessel/Reactor/Tanks Fire Fighting Plant Pressure Reducing System/Station Cryogenic Services

• Type: Duplex Safety Valves

Our in-depth knowledge and industrial expertise enable us to manufacture and supply a distinguished range of Electric Water Heater. Uses: Used in winter seasons for water heating work. Features: High performance Long functional life Robust design

• capacities: 20 Litres

This machine operates silently and is equipped with an inbuilt steam generation mechanism that meets the sterilization needs for immediate OT and Laboratory needs. It is well insulated to reduce heat loss and is fitted with safety valves. This rapid sterilizer delivers almost dry instruments after the cycle. Further it is incorporated with temperature auto cut-off that ensures total safety. It uses very little power and water which adds to its cost-effective features.

• Country of Origin: Made in India
• Material: Plastic
• Measuring Range: 21 kg/cm2
• Accuracy: +/- 2 %
• Packaging Type: Box
• Ambient Temperature: 70 Degree C

sterilization tray, ophthalmic knive, White Gauze Swabs, Small Tray

pilot opreted safety relief valve, Safety Relief Valves, gas, Ball Valves

Hot Air Sterilizer, Artificial Eyes, capsule hooks, iris hooks

industrial safety valves, Wafer Butterfly Valve, fabricated basket strainers

Pressure Safety Valves

sterilizing machine, ETO Gas Cartridge, automation control panel

laboratory sterilizers, laboratory agitator, Laboratory Dryers

Microtrack surgicals - we are one of the famous manufacturers & suppliers of stainless plastic sterilization tray from india.