Laboratory Autoclave And Sterilizers Dealers in Odhav, Ahmedabad

• Packaging Type: Carton Box
• Usage: Laboratory Use, Industrial Use
• Specialities: High Quality
• Type: Vertical Autoclave
• Material: Mild Steel
• Shape: Vertical
• Color: Grey
• Condition: New
• Pressure: High Pressure
• Warranty: 1 Year
• Country of Origin: India
• Operating Mode: Fully Automatic
• Application: Laboratory Use

• Brand Name: DM
• Shape: Vertical
• Chamber Volume: 10-15 Litre
• Material: Stainless Steel
• Insulation Wall: Double Wall
• Automation Grade: Fully Automatic
• Usage/Application: Laboratory
• Power Consumption: 2 KW

Silent Features: Rust proof stainless steel pressure vessel Specially designed Steam Safety Valve, pressure control switch and Temp. control switch – Triple Safety precautions for operator safety Accurately Calibrated Pressure Gauge Guaranteed timings and performance as per IS 4031   General Descripation & Specifications:The Autoclave is double walled. Inner boiler chamber of stainless steel cylinder, with concealed yet easily replaceable heaters surrounding the vessel for quick heating. The boiler lid is of thick stainless steel and can be bolted to the chamber by heavy hexagonal nuts. The silicon gasket, seated in a groove, makes the unit leak proof even at high pressure. The boiler is mounted in between the strong angle iron frame and covered with CRC sheet – attractively powder coated. The outer cover can also be of Stainless steel at an extra cost. The gap in between the walls is filled with thermal insulation to prevent heat loss and energy. The control system consist of sensitive pressure regulator, pressure gauge, safety valve, temperature control switch, power ON-OFF switch and pilot lights to indicate status of the electric heating units and control switches.   Standard Accessories: Special rack to hold specimens above water level in the autoclave and in vertical position Pressure gauge with calibration report with national traceability Silicon rubber Gasket Spanner   Accessories At Extra Cost: Length comparator with dial micrometer 0.002mm X 5mm shrinkage bar moulds(single/two/triple gang) PID Auto tuning Digital Temp. indicator cum controller with or without PC interface for data logging PID Auto tuning Digital Pressure indicator cum controller with or without PC interface for data logging Spare heater set Spare Silicon Gasket Spare Pressure gauge Spare safety valve    

• Brand Name: DM (INDIA)
• MODEL NO: DM 909
• Working Temperature: 121 deg.C
• Working Pressure: 1.26 Kgf/cm2 (15 psi)
• Hydro Test Pressure: 2.5 Kgf/cm2 (35 psi)

Our in-depth knowledge and industrial expertise enable us to manufacture and supply a distinguished range of Electric Water Heater. Uses: Used in winter seasons for water heating work. Features: High performance Long functional life Robust design

• Conveyor Width: 300mm, 450mm, 600mm, 750mm, 900mm & 1200mm
• Tunnel Types: Sterilizing &Depyrogenation
• Use for Sterilization: Glass Ampoules, Vials & Bottles
• Total Zone: Pre Heating Zone, Sterilizing Zone, Cooling Zone
• Output: Depends on belt size
• Conveyor Height: 900mm +/- 15mm
• Working Direction: Left To Right
• Power Consumption: Depend on tunnel model or size
• Dimensions: Depend on tunnel model or size

Harsiddh Engineering Company, being leading name in the manufacture and export of pharmaceutical packaging machinery provides excellent decontamination and sterilization equipments. Our specially designed equipment is used in sterilization and depyrogenation of ampoules, bottles and vials. The machine comes as a complete unit with in-feed system, preheating and sterilizing zone, cooling and exit feed mechanism. As the bottles and vials move along the conveyor, they are sterilized. The equipment receives materials from up line washer and these are directed to the drying zone. At this zone, hot air vaporizes the washing moisture and preheats the bottles. They then move to the hot zone where they undergo sterilization and depyrogenation through heating. They are then subjected to cold air which cools them off before entering aseptic region. Our machines have CE certification. Our sterilization machines uses advanced instrumentation and control topologies to effectively moderate heat, water, air and other materials. Temperature sensors regulate heating and cooling while pressure gauges regulate the system pressure. The conveyor belt speed is also carefully controlled. In addition the system has an advanced PLC control module that monitors and regulates all processes.   Silent Features     Repetitive accuracy in reduction of endotoxin count. High productivity due to reduced idle time and optimization of operating time. Infinitely variable speed to achieve optimum production. Swift and convenient to use machine. Intelligent logic control systems for controlling temperatures in heating and cooling zones. Complete closed loop systems for heating zone and cooling zone. Important parameters are password protected. Graphics for displaying and editing various procted. Accurate data logging on to printer and recording onto strip chart recorder (optional). Auto shut down after batch completion Automated Self Sterilization of the cooling zone using Dry Heat Documentation available for qualification, validation Full PLC controlled and reliable depyrogenation process Double wall asbestos free ceramic wool insulated re circulatory module containing high temperature EU – 13 grade final HEPA filter with suck back mechanism suitable for 300 °C continuous repeated cycle. This zone provides uniform hot air over the glassware for the Purpose of de pyrogenation. In this zone the temperature raises as quickly as Possible by the help of heating element, without inducing cracking due to excessive thermal stress. The glassware remains in this zone at a required time period to meet The specified endotoxins reduction generally > 3 log scale. This section consist of unidirectional hot air flow unit with turbine blower assembly, High temperature HEPA filter (up to 350 °C) and heater bank assembly. Integrated temperature sensors are provided for monitoring & controlling purpose of Temperature inside the sterilizing zone. For this purpose one sensor is placed above The HEPA filter and the sensor is placed at the entry side of sterilizing zone. For Extra precaution one temperature sensor provided at Heater Assembly ( 375 °C) is placed for protection of Heaters. The entry and exit side of the sterilizing zone consists of manually adjustable profile Plates resulting in maximum temperature uniformity and ensure consistent result for Glassware with varying sizes.

• Material: SS
• Country of Origin: Made in India
• Warranty: 1 Year
• Brand Name: Laxmi
• Model Name/Number: LST- 750, LST 600, LST 750, LST 900, LST 1200
• Packaging Type: Wooden Box

• Chamber Width (mm): 450
• Chamber Height (mm): 450
• Chamber Capacity (Liters): 191

Mechanical removal of air initially from within the chamber with the use of a vacuum system ensures that no air-pockets hinder the steam penetration and hence the sterilization process. Steam Sterilizer for sterilization of varied Hospital equipment like gloves, linen, gauze, cotton, instruments, glassware etc. using standard 121°C & 134°C cycles which are pre-programmed in the memory of the PLC Microprocessor Electrical Steam-generator provided for all models up to a chamber volume of 1000 liters. Temperature uniformly and accurately maintained throughout the chamber to within ± 0.5°C of the Set Sterilization temperature. Air Filter: 0.01 micron clean air-filter for stabilization of the internal air-pressure from vacuum conditioChamber Width (mm) n. Door safety: Door is automatically locked when chamber is under pressure. For double door models, both doors will not open simultaneously to ensure sterile chain integrity.

• Type: Boiling Sterilization Apparatus
• Brand Name:: Bond + Well
• Model Number:: B01B
• Place of Origin:: Gujarat, India

• capacities: 20 Litres

This machine operates silently and is equipped with an inbuilt steam generation mechanism that meets the sterilization needs for immediate OT and Laboratory needs. It is well insulated to reduce heat loss and is fitted with safety valves. This rapid sterilizer delivers almost dry instruments after the cycle. Further it is incorporated with temperature auto cut-off that ensures total safety. It uses very little power and water which adds to its cost-effective features.

• Item: Autoclave
• MOC: SA240 TP316
• Size: 1450mm ID X 13.26 Mtr Long, Shell-25mm Thick, Dish Ends-30mm Thick Hydraulically Tested at 55 Kg/Cm²

We deals in supplying of wide range of Autoclave.

• Brand Name: Soul Sterile Industry
• Material: Ss,ss,ss
• Shape: Horizontal
• Color: Silver
• Condition: New
• Power: 5kw
• Pressure: High Pressure
• Usage: Laboratory Use, Industrial Use
• Certification: ISO 9001:2008
• Voltage: 240V
• Capacity: 50-100 Litre, 100-200 Litre, 200-300 Litre, 300-400 Litre
• Width: na
• Operating Temperature: na
• Packaging Type: Carton Box, Wooden Box, Wooden
• Mount Type: Floor Mounted Autoclave
• Specialities: High Tensile, High Quality, Hardend & Temper, Dimensional, Corrosion Resistance, Auto Reverse, Accuracy Durable
• Overall Dimension: 295x150x235mm, 350x230x295mm, 480x260x365mm
• IP Grade: IP 30
• Type: Horizontal Autoclave
• Thickness: 0-5mm, 5-10mm
• Weight: 40Kg
• Frequency: na
• Phase: Three Phase
• Warranty: 2 Year
• Accuracy: 95
• Country of Origin: India,india
• Height: na
• Operating Mode: Fully Automatic
• Temperature: 121
• Corrosion Resistance: Yes
• Depth: na
• Rust Proof: Yes
• Chamber Volume: 5-10 Litre, 10-15 Litre, 15-20 Litre, 20-25 Litre
• Warranty: 2

We are offering fully automatic hinged door autoclave rectangular horizontal, cylindrical horizontal, cylindrical vertical model are available.

• Packaging Type: box
• Valve Size: 1inch, 1/2inch, 1.1/2inch, 1.1/4inch, 2inch, 3/4inch, 1/4"-2"
• Specialities: Non Breakable, Heat Resistance, Durable
• Material: SS304 Or SS316
• Country of Origin: India
• Mounting Type: Vertical
• Number Of Way: 2way
• Temperature Pressure: Low Temperature Pressure
• Brand Name: FM-Lok
• Diameter (mm): 40 Mm, 50mm, 60mm
• Overall Length: 6-10 Inch, 20-30 Inch, 40-50 Inch
• Type: Pressure Safety Valves
• Condition: New
• Finishing: Polished
• Automatic Grade: Manual
• Warranty: 1 Year
• Corrosion Resistance: Yes
• Packaging Size: 10 Pieces
• Driving Mode: Manual
• Operating Temperature: 180
• Power: Hydraulic up to 500 bar
• End Connection: Thread
• Working Pressure: 6000 psi
• Usage/Application: Industrial
• Size: 1/4" - 2"
• Pressure: Up to 700 Bar
• Product Type: SS
• Name: Pressure Safety Valve
• Made in: India

• Brand Name: VEER
• Material: SS/Casting
• Pressure: 12 kg

We offer safety valves. We are one of the leading manufacturers, suppliers and exporters of air compressor, air receiver tank & safety valve.

• Valve Size: 15mm to 150mm
• Material: CS,SS
• Number Of Way: 2way
• Connection Type: S E, F.E., S.W.
• Media: Air,Water,Gas, STEAM, CHEMICAL
• End Connection: All
• Brand Name: K-TECH
• Color: BLUE
• Usage: WATER, AIR, INDUSTRIAL
• Certification: ISO 9001:2008 Certified
• Packaging Type: Customize
• Country of Origin: India
• Size: 1/2
• Cap Type: OPEN, CLOSED
• Seat Type: SOFT/ METAL
• Fluid Handled: OIL,STEAM,CHEMICAL, WATER

• Features: Automated Self Sterilization of the cool zone using Dry Heat

The Sterilization Depyrogenation cycle is based on selection of cycle times and exposure of temperature that will sterilize or depyrogenate the glassware to an acceptable low probability level of contamination, without adversely affecting the critical parameters of the product. Generally Heat destroys micro organisms. The destruction process of microorganisms is a function of time and temperature. The rate of destruction is linear logarithmic, means in a given time interval and at a given temperature, the same percentage of the bacterial population will be destroyed. Hence forth introduce “Forced Conventional Dry Heat Sterilizer” (Sterilizing Tunnel).

We are an eminent Manufacturer and Supplier of Portable Autoclave (HSW117) from Gujarat, India. We are backed by a proficient team and are thus able to provide durable and efficient Autoclave. Ours is a Portable Autoclave that comes with single walled complete S.S. / aluminum body. One can obtain our Portable Autoclave (HSW117) in bulk quantities as well and that too at the acceptable prices. More Information : Electrically operated Complete with MS powder coated stand, Pressure gauge, Pressure release valve, safety valve To work on 220/240V, AC, Single phase supply Dia x Depth 300 x 300 mm 300 x 375mm 350 x 400mm 300 x 500mm

• Shape: Vertical
• Chamber Volume: 10-15 Litre
• Insulation Wall: Double Wall
• Automation Grade: Semi Automatic
• Brand: UPM
• Power Consumption: 2 KW
•  :  

• Type: Portable Autoclave
• Material: Carbon Steel, Metal, Mild Steel, Stainless Steel
• Shape: Horizontal, Vertical
• Thickness: 0-5mm, 10-15mm, 5-10mm
• Weight: 1-10kg, 20-30kg, 30-40kg, 40-50kg
• Color: Black, Golden, Grey, Grey-Golden, Metallic, Shiny Silver, Silver
• Voltage: 240V, 380V, 440V, 580V
• Condition: New, Used
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Surface Finishing: Polished, Power Coated
• Temperature: 0-50ºC, 100-200ºC, 50-100ºC
• Application: Industrial Use, Laboratory Use
• Feature: Accuracy Durable, Auto Reverse, Corrosion Resistance, Dimensional, Hardend & Temper, High Quality, High Tensile
• Automation Grade: Manual, Semi Automatic

• Material: Stainless Steel, Carbon Steel
• Feature: resistant to corrosion, Cost effective
• Size Cavity: 1 in 25.4 mm
• Inlet/Outlet Sizes: 1/2
• Set Pressure: 0.20 to 700 Kg /cm2
• Max. Working Temp.: 399° C

sterilization tray, ophthalmic knive, White Gauze Swabs, Small Tray

• Material: Metal
• Shape: Vertical
• Voltage: 240V
• Condition: New
• Power: 1-3kw
• Warranty: 1 Year
• Mount Type: Floor
• Application: Industrial Use
• Automation Grade: Fully Automatic
• Use in: Laboratory
• Power Source: Electric

• Size: 2 CU FT

Door: Double door & Auto door models are available for clean room applications. Low cost per cycle: Lowest operating costs compared to other available options. Advantages of Automation: During Sterilization a Microprocessor PLC controls temperature, Moisture, Gas Injection, Gas Exposure and all critical time and pressure based parameters. Important sterilization parameters like Phase Status, Current Values & set values, continuously displayed at all times on Controller Screen. Continuous display of Temperature, Humidity and Pressure On-line allows user to be aware of Cycle status at all times. Temperature uniformly and accurately maintained throughout the chamber to within ± 4°C of the Set Sterilization temperature. The advanced SCADA software provided stores detailed records of Process-Data for every cycle. Reports are available in Data, Summary and Graph formats for every batch of goods sterilized. User can re-print reports as and when required, using any normal printer. Digital storage of data cuts cost, saves space, ensures safety of data and negates cost of expensive thermal printing.

• Features: Made of soft yet strong SMS fabric, High barrier and durability to maintain sterility, Stands up to handling, Easy wrapping and unwrapping, Compatible with major sterilization processes.
• Product Code: 06J01

    Introduction: Our vertical autoclaves are widely used for the day to day sterilization procedures and in various laboratory applications.We specialize in both standard and customized models, specifically designed to meet the challenging demands of various scientists for individual and specialized research applications. Apart from that, we are also supplying our economical autoclave in India catering to variety of customers ranging from Defense Installations, Research Laboratories and Educational Institutes and various R&D laboratories of leading national and multinational companies.