Laboratory Bath Dealers in Vatva, Ahmedabad

• Type: Automatic
• Material: Copper
• Shape: Rectangular
• Application: Laboratory
• Color: Brown
• Finishing: Polished

The instrument is designed and made as per the National Standard for Detection of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test. It is suitable to determine the corrosiveness to copper of aviation gasoline, aviation turbine fuels, automotive gasoline, natural gasoline or other hydrocarbons having a Reid vapor pressure no greater than 124 kPa, cleaners solvent, kerosene, diesel fuel, distillate fuel oil, lubricating oil, and other petroleum products. The instrument has the function of temperature controlling, timing and alarming.Used for detecting the presence of corrosive sulpher in petroleum products. The apparatus consists of a bath either dual purpose (500C & 1000C) or a boiling bath (1000C only) without stainless steel bomb and copper strips of definite size 6 bombs or 18 test tubes can be accommodate in each type of bath with different temperature regulation system to operate on 220 volts AC. mains.Units can be used to test samples that do not require a test bomb such as diesel fuel, fuel oil, automotive gasoline, Stoddard solvent, kerosene and lubricating oil. Temperature controller has a °C/°F switchable digital set point and display (As per model.). Bath is fully insulated and features welded stainless steel double-wall construction with built-in support rack. Equipment is protected by an over temperature control circuit which automatically interrupts power to the unit should bath temperature exceed programmed cutoff point.Features : Power supply: 220 V± 10%, 50 Hz Temperature sensor: Industrial platinum resistance, scale number is PT100. Temperature controlling range: Room temperature to 1000C (temperature will be vary as per requirements.) Temperature controlling accuracy: ± 10C Temperature display mode: LED display Main heating power: 600 W Auxiliary heating power: 1000 W Time controlling range: 1 min24 hours Time display mode: LED display Sample hole: 4 Sample tested at one time: 412 pieces Ambient temperature: Room temperature 350 C Relative humidity: ≤ 85% Total Power supply: Not more than 1800 W Microprocessor based PID temperature controller for accurate temperature controlling.

• Power: 230VAC, Single Phase with Neutral.
• MOC: Inner Tank: SS. Outer Body: Powder Coated MS.

Change in length along the surface of the pipe due to heating and subsequent cooling is called reversion. This bath is particularly used for PVC based pipes.

The Cool Water Bath, provided by us, is reckoned due to its make & quality. The assistance of our sophisticated packaging system and skilled personnel, we are able to meet the standard as well as customized packaging requirements of the clients with ease. Quality raw materials have been used for the production of our entire range. As a dependable name, we procure these raw materials only from trustworthy sources present in the market.

"Surya" baths are unquely designed to heat faster with low energy cost and to maintain the temperature for longer time. To maintain the temperature for longer time. To maintain the temperature into the bath circulation is done by either one or two pumps as depending on the volume of bath. Application : Hot and cold water baths are used for long & short term Hydrostatic Pressure test of pipes. These baths are nade as per international standards to provide the heating & cooling media to the product.   USP : Temperature is controlled by microprocessor based controllers. In large size bath :"Surya" gives separate bath for heating & the hot water is circulated to the other chamber so as to save the energy cost.

• Capacity: 5 liters to 30000 liters
• Speed range [Rpm]: 1500
• Material: Stainless steel
• Dimension: 165 (W) X 230 (L) X 110 (H)
• Motor: AC Motor

Kant Plastology’s HOT WATER BATH is the equipment with heavy and rigid construction. The apparatus is build with calculated of sheet as per water volume. Energy efficient heating elements and stirrer motor are used for produce homogenous heat in the entire chamber. Thick heat insulation use to minimize the heating loss during test. Easy top opening door to place the test sample, Slot in door to retain the rubber hose pipe attached with test sample, Drain valve & Heater safety cover are extensive features to geared machine for best quality HOT WATER BATH.

We arae offering cold water bath. Cooling- high efficient cooling system designed by expert wateroil circulation- through water circulation pump of ‘taro’ make temperature range- ambient to 10°c resolution- 0.1°c accuracy- ± 0.5°c insulation- 50mm thick puf.

Application & Process: At PRISM, We design and manufacture a wide range of agitators for liquids and Paste for all process in the pharmaceutical, chemical, food, cosmetics and similar industries. Agitators are provided with different types of agitation components for process such as mixing, blending, dissolution, dispersion, homogenization, reaction, fermentation, oxidation, digestion and emulsification of liquid, paste, ointment, solution, viscous material and solid-liquid. Agitators are designed and adapted to any vessel shape and can be implemented with or without lower support. Different types of blades can be combined depending on the process requirements. The sealing system are designed and adapted depending on the requirement of the various process and start from simple retainers to double mechanical seals. Agitators are available with different type of mounting as per suitability of the process and users requirements. Different types of blades can be combined depending on the process requirements and various conditions including the stirring objective, tank shape, rotating speed, viscosity, mixing blades of different configurations should be applied for different operating objectives. Different mixing blades follow various specifications to design and select the configurations of the blades. The ratio of the blade to the inner diameter of the tank, angular speed of the blade top, viscosity change during mixing process and the range of the flow volume are the factors to be considered. There are various types of blade mixer and can be categorized into axial flow and radial flow according to the flow pattern of the fluid in the tank. The main factors affecting mixing performance are as below and the commonly used configurations are listed for reference: Shape, diameter, sweep back angle and slant angle of the mixer blade. Number of layers and the vertical position of the mixer blade where it is installed. Rotating speed of the mixer blade Shape, inner volume, number of baffles and outline dimensions of the mixing tank Batch operation or continuous operation. Agitators available with different type of drives and speeds with direct motor and with gear drive as per process requirements. Agitators are suitable for mixing volumes 5 liters to 10,000 liters. Salient Features: Design is cGMP - Current Good Manufacturing Practices compliance. All contact parts AISI 316 & non contact parts AISI 304. Capacity available for volume of 5 liters to 5,000 liters. Available various different type of mixing blade. Available different mounting of stirrer assembly.1. Wall mounting.2. Telescopic Stand.3. Top of the vessels / Tanks.4. Bottom of the Vessels / Tanks. Can be provided Variable Speed Drive for stirrer by VFD. Option available for Explosion proof motor and controls panel.

We are offering calibration bath. Nova digital calibration bath is specifically designed to cater the needs for calibration of thermometers, temperature indicators, controllers, temperature gauges, sensors, transmitters, recorders etc.etc. As well as for laboratory, r & d, quality control and analytical application. Salient features : - fully automatic. - easy to operate. - isolated working chamber. - high & reproduceable accuracy. - obstruction free working space. - uniform heating & stirring. - digital temperature indication. - digital temperature control. - solid state circuits. - highly sensitive temperature sensor pt-100 type. - stirring system built-in. - tableplatform model required less space. - powder coated elegant outer body. - provided with our associate calibration certificate traceability to national standard. - external circulation pumping system (optional). - auto-tune pid digital control (optional). - microprocessor programmable digital control (optional). Application : nova digital calibration bath are available for various application in r & d centres, quality control departments, maintenance departments, research organization, industries, refineries and petroleum testing laboratories and power plant especially for calibration of various type of temperature instruments. The calibration bath is essential instruments for all maintenance division, process control section and tqa for iso-9000 test requirements.

• Color: Silver, Grey, Black
• Automation Grade: Semi-Automatic, Fully Automatic, Manually Automatic
• Driven Type: Electric
• Type: Extraction Mantle
• Capacity: 250-500 ml, 500-1000 ml
• Voltage: 110V, 220V, 280V
• Material: Stainless Steel, Mild steel, Metal
• Warranty: 1 Year, 2 Year
• Application: Laboratory

Used to maintain in water the Marshal specimens to be tested at 600 + 10C (Asphalt specimens) or 37.8 + 10C (Tar Specimens) as prescribed by the specifications. The same Waterbath can also be used for penetration test, stripping test or even soundness test of cement with the use of additional accessories. Rectangular, Double walled construction. Inner Chamber made of stainless steel and outer body made of mild steel duly powder coated. Temperature Range 50C above ambient to 990C. Fitted with immersion type heater, Digital Temperature Controller cum Indicator accuracy + 0.50C. Operating on 230V AC. Fitted with circular pump with stirrer.

• Power: Electronic
• Material: Mild steel

Temperature Range : 5 C Above Ambient to 100 C. Inner Chamber Made of Stainless Steel (S.S.) And Outer Chamber made of Mild Steel (M.S.) Stainless Steel (S.S.) Microprocessor based Digital Temperature Controller Cum Indicator.

• 06: 250ml
• 12: 250ml
• 06: 500ml
• 12: 500ml

• Type: Magnetic stirrer with & without Hot Plate
• Voltage: 220 V
• Capacity: 1, 2, 5, 10 litre
• Phase: Single Phase
• Frequency: 50 Hz

Cold Water Bath, Universal tensile tester, Notch Cutter, VSP-HDT Tester

Low Temperature Water Bath, Automatic marshal compactor, Sand Absorption Cone

refrigerated bath, shaker, Vacuum Oven, Cop Apparatus

Water Bath, heating block, Hot Plate, Laboratory Instruments

Hot Water Bath, blister packaging machine parts, Hot Air Oven