Leader Valves Dealers in Kathwada, Ahmedabad

• Size: 40MM TO 1200MM
• Type: Wafer Type, Slim - Seal Butterfly Valves
• PRESSURE RATING ASA: 150#, 300#
• SEAT: Neoprene / Nitrile / Viton / Silicon / PTFE Butterfly Valves
• MOC: Cast Iron / Cast Steel / SS 304 / 316, SS 304L / 316L.

• Type: toss
• Brand Name: A Global Leader, Your Single Source, for Hydraulics The global leader in the design and manufacture

We offer rexroth valve. A global leader, your single source, for hydraulics the global leader in the design and manufacture of hydraulic control valves for industrial and mobile applications . Rexroth offers a full line of directional (spool and poppet), proportional, pressure, flow, check, logic cartridges, “sandwich” (modular), and cartridge type valves. no other single source hydraulics supplier offers a breadth of products like rexroth, backed up by expert hydraulics applications assistance . For demanding hydraulics systems applications – requiring for example, standard pressure capability to 4500psi and higher, coupled with flow limitations measured to the 1000’s of gallons per minute — the right choice for advanced hydraulics control valves is bosch rexroth.

• Sizes: DN50 to DN900 ( NPS 2 to NPS 36)
• Pressure Rating: Class 150 & PN10 / PN 16
• Design & Manufacturing Standard: BS 5155, API 609, AWWA C504
• Face to Face Std.: BS 5155, API 609, AWWA C504
• End Connection Std.: BS 5155, API 609, AWWA C504, ASME B16.5 & ASME B16.10
• Testing Standard: API 598
• Type of Bore: Standard (Full Bore)
• End Connection Type: Wafer Type, Lugged Type, Flanged Ends, etc.
• Seat Design: Soft Seat – EPDM, Nitrile, Viton, PTFE, RPTFE, etc.
• Disc Design: Centre Disc, Offset Disc, Double Offset Disc, Triple Offset Disc,
• Operated Type: Hand Lever, Gear, Pneumatic Actuator, Bare Shaft, etc.

• Size: Up to 36 Inch
• Brand Name: SYSCHEM
• Pressure: Up to 2500#
• Color: Customize
• Packaging Type: Graphoil/ PTFE/
• Design Type: Swing Wafer Design
• Media: Water, Sea Water, Oil & Gas
• Valve Size: Up to 36 Inch
• Model Name/Number: SYSCHEM
• Finishing Type: Paint
• Material Grade: WCB/ SS 304/ SS 316/ LCB/ ALLOY STEEL
• Warranty: 12 Months date of Installation & 18 Months the date of Supply
• Cover Type: Bolted

We are offering swing check valve. swing check valves bolted cover design, flanged end suitable for horizontal & vertical line shakti valves [nrv] are swing type and bolted cover construction. The one piece disc construction is securely fastened to the hinge by means of a lock nut & pin. The disc is free to rotating type to avoid any other wear. The hinge pin offers excellent wear resistance properties. swing check valves also can be supplied with titling disc design, dash pot arrangement and outside lever & weight design for use where control of the disc is desires. shakti also offer p.t.f.e. (pfa / fep) lined ball type/y type & rubber lined flap type check valves for high corrosive application. swing type check valve [non return valve] bolted cover, suitable for horizontal & vertical line design standard: bs 1868 size range - 1" to 12" pressure rating - 125# / 150# / 300# end connection : flanged end lift type check valve [non return valve] bolted cover, suitable for horizontal line only design standard: bs 1868 / din size range - 1" to 12" pressure rating: pn 6 / pn 10 / pn 16 / pn 25 / pn 40 end connection : flanged end forged steel lift check valve (non return valve) bolted cover type design standard: bs 5352 pressure rating: 800# / 1500# end connection : screwed / socket weld / butt weld end salient features : • body & cover made from high quality casting with liberal sections. The castings are precision machined for high performance. • body seat ring & disc machined to close tolerances providing smooth action and accurate seating. • seat ring screwed in to the body are replaceable type. Seal welded type seat ring & integral seat cab also be offered on special request. • stellited seat ring & disc also be offered on special request. • in built wear life for long duration in service. material of construction: cast iron : is 210 gr fg 200 cast carbon steel : astm a 216 gr wcb cast stainless steel : astm a 351 gr cf 8/cf 8m forged carbon steel : astm a 105 forged stainless steel : astm a 182 gr f304 / f316 design type : swing type disc / piston lift type disc end connection : screwed as per bsp/bspt/npt socketweld : as per ansi b 16.11 flanged : as per ansi b 16.5 pressure rating : asa 125#, 150#, 300#, 600#, 800#, pn 16 & pn 40 engineering option : gear operated, electrical actuated, size range : 15mm to 300 mm design & testing international standard: valve design : bs 5351 / ansi b 16.34 / api 6d pressure testing : bs 6755-i face to face : ansi b 16.10 flange drilling : ansi b 16.5 / bs 10 table / din / is 6392 butt weld end : ansi b 16.25 socket weld end : ansi b 16.11 screwed end : ansi b 1.20.1(bsp/npt)

Dual plate check valve The dual plate check valves are the ideal protection for the pump and drive motors. It helps to discharge medium to maintain the system pressure. According to the application, we offer various options of size, shape, material of construction, and configuration to perfectly match the requirement.

• Material: ASTM Specifications
• MANUFACTURING STD.: Design
• BS 1868 / API 6D:  
• Face to face: ASME B 16.10
• Flanges: ASME B 16.5
• Butt welding: ASME 16.25
• Testing: API 598 / BS 6755 Part I / API 6D
• Trims: Varieties of combinations.
• Optional: By pass arrangement
• Dash pot / hydraulic non-slam arrangement.: Note
• RTJ Joints on request.: RTJ Body Bonnet Joints for ratings > 1500 lbs (standards)

Brightech™ Cast Ductile Iron FEP/PFA Lined Butterfly Valve, High Performance, Tight Shut Off, Bi-directional, Wafer or Lug Style, Slim Seal, Integral Stem & Centric Disc Design, Lever / Gear Operated Type suitable for chemical corrossion & temperature resistance.Size Range: 50mm to 500mm Feature & Benefits STANDARD DESIGN Brightech™ Fully Lined Butterfly Valves are design in accordance with face to face dimension of API 609 Specification and suitable to mount between two flanges of ANSI B 16.5 # 150 flanges which permits this valves to replace with any standard Butterfly valve without altering existing piping FEP/PFA BODY & DISC LINER The high quality most advance fluoro-polymers liners on the Butterfly valve is melt–processible, avoids porosity problems.The non sticky properties of the liner ensure high performance of the valve under highly corrosive chemicals in conjunction with high pressure and temperature LOCKED IN DISC LINER The melt-processible fluoropolymer of this Butterfly valve is securely locked in to cast hole of disc, which helps to prevent liner to collapse in vacuume condition and blow out in high pressure conditions regardless of high temperature LIVE LOADED TOP SEALING Live loaded disc spring washers provides constant uniform packing pressure requires no manual seating from the top in running condition TIGHT SHUT OFF A silicon backing strip is provided inside deep machined body groove for the liner, to resist against the disc edge which creates tight shut-off Lining Specification OTHER LINING MATERIAL We offer other lining materials like PTFE, ETFE, ECTFE, PVDF, PP, HDPE LINING THICKNESS Min. 3.0mm/4.0mm overall SPARK TEST Body liners & all wetted parts are spark tested at 20,000 Volts The body material is generally Cast Ductile Iron Alternatively we offer completely CF8 / CF8M Body and Ball.   Copyright © 2007 Brightech Valves and Controls Pvt. Ltd.

• End Connection: FLANGED END TO ANSI B 16.5/BS 10 TABLE SOCKET WELD END TO ANSI B 16.11 BUTT WELD END TO ANSI B 16.25SCREWED END TO ANSI1.20.1
• DESIGN STANDARD: MFG. STANDARD
• INSPECTION & TESTING STANDARD: API 598
• FACE TO FACE: MFG.STANDARD
• SIZE RANGE: 1" TO 12"
• PRESSURE RATING: 150# TO 600#

• Butterfly Valve - Technical Specification: Size Range
• 40 NB through 1200 NB: Pressure Rating
• ASME / BS 125# / 150# / 300# / PN10 / PN16 / PN25: Type
• Center Disc, Single / Double / Triple Offset Disc. Fully Lined Body / Unlined Body: End Connection
• Wafer / Lugged / Flanged: Operation
• Wrench / Manual Gear / Pneumatic and Motorized: Port Opening
• Full: Seat
• Metal to Metal / Natural / Neoprene / Nitrile / EPDM / Silicon / Vitone Rubber or PTFE: Disc
• Solid-Dual Shaft / Single Shaft: Gasket & Packing
• Equivalent or better than seat material: MOC
• Ref Material of Construction & Pressure-Temperature Table: Design Code
• API - 609 / BS – 5155 / AWWA C504: Testing
• API 598 / BS 6755 Part - I: Inspection

LGL Series globe steam stop valve are manufactured by lubi valves. Conforming to BS 5152 standards, designed for durability with a cast iron body

• Material: PVC & Metal
• Usage: Water Fitting
• Finishing: Coated
• Mounting Type: Vertical
• Warranty: 1 Year
• Specialities: Investment Casting, Durable

• Brand Name: Zebco
• Material: Stainless Steel,Cast Steel,Stainless Steel, SS304, SS316,Brass
• Connector Type: Flanged End
• Material Grade: ASTM
• Color: Silver
• Design: 1pc / 2pc / 3pc
• Condition: New
• Automation Grade: Manual, Automatic
• Application: Water Fitting, Oil Fitting, Gas Fitting
• Size: 1 inch to 48 inch
• Certification: ISO 9001:2008
• Feature: Investment Casting, Casting Approved
• Packaging Type: Wooden Box
• Flange Size: As per Standard
• Type: Water Ball Valves, Oil Ball Valves, Gas Ball Valves, Ball Valves
• Country of Origin: India
• Media: Water
• Temperature Of Media: High Temperature, Low Temperature, Medium Temperature
• Bore Type: Full Bore
• Number Of Way: 4way, 3way, 2way
• Wog Rating: 150, 300, 600
• Lever Type: Handle / Actuator
• Type Of Stem: SS

• Application: Gas Fitting

• Design std: BS 5155
• Body: ASTM A216 GR WCB / CF8 / CF8M
• Flapper: ASTM A216 GR WCB / CF8 / CF8M (Fabricated: MS / SS304 / SS316)
• Lining: PTFE / PFA / FEP / PVDF / HDPE / PP
• Lining thickness: 3mm Minimum
• Flange connection: ANSI B16.5,#150 / Customer requirement
• Spark test: 15 KVDC

We are manufacturing wide range of the valves. Manually lever operated,gear operated,actuatror operated.  

• Material: Carbon Steeel, Stainless Steel
• Application: Non Return Flow
• Pressure: High Pressure
• Size: 50 mm to 600 mm
• Ends: Flanged End
• Testing Standard: API 598, ISO 5208

We offer our esteemed clients, Swing Check Valve. The Swing Check Valve is manufactured by our qualified engineers, using sophisticated technology and high quality raw material. The Swing Check Valve are in compliance with the latest international standards in terms of quality. The Swing Check Valve is available in a vast range of specifications, grades and sizes Features Sturdy construction High efficiency Corrosion resistant Economical

• Thickness: 5-10mm
• Grade: ASME
• Packaging Type: Corrugated Box
• Surface Finishing: Polished
• Handle Material: Stainless Steel
• Operating Type: Automatic

WE ARE Cast Iron Butterfly Valve Manufacturer, Cast Carbon Steel Butterfly Valve Manufacturers, Cast Stainless Steel Butterfly Valve Exporter, Slim-Seal Design Butterfly Valve Supplier, Rubber lined Butterfly Valve Stockiest, P.T.F.E. lined Butterfly Valve Manufacturer, Wafer Type Butterfly Valve Manufacturers, Damper type Butterfly Valve Exporter, High Performance Butterfly Valve Manufacturer, Center Disc Butterfly Valve Manufacturers, Off-Set Disc Butterfly Valve Exporter, Gear operated Butterfly Valve Supplier, Pneumatic operated Butterfly Valve Stockiest, Electrical operated Butterfly Valve Manufacturer, Zero Leakage Butterfly Valve Manufacturers, Double Flange Type Butterfly Valve Manufacturer, Butterfly Valve In Punjab, Butterfly Valve Manufacturer in Haryana,

• Material: SS
• Brand Name: SHREE
• Usage: Industrial
• Color: Sky Blue
• Packaging Type: Wooden Box
• Country of Origin: India

EXPORTER OF BALL VALVE , BUTTERFLY VALVE