Leader Valves Dealers in Sarkhej, Ahmedabad

• ALL SS: CS

Plug valves are valves with cylindrical or conically-tapered "plugs" which can be rotated inside the valve body to control flow through the valve. The plugs in plug valves have one or more hollow passageways going sideways through the plug, so that fluid can flow through the plug when the valve is open. Plug valves are simple and often economical. When the plug is conically-tapered, the stemhandle is typically attached to the larger diameter end of the plug. Plug valves usually do not have bonnets but often have the end of the plug with the handle exposed or mostly exposed to the outside. In cases like that, there is usually not much of a stem. The stem and handle often come in one piece, often a simple, approximately L-shaped handle attached to the end of the plug. The other end of the plug is often exposed to the outside of the valve too, but with a mechanism which retains the plug in the body. The simplest and most common general type of plug valve is a 2-port valve, which has two positions, open to allow flow, and shut (closed) to stop flow. Ports are openings in the valve body through which fluid can enter or leave. The plug in this kind of valve has one passageway going through it. The ports are typically at opposite ends of the body; therefore, the plug is rotated a fourth of a full turn to change from open to shut positions. This makes this kind of plug valve a quarter-turn valve. There is often a mechanism limiting motion of the handle to a quarter turn, but not in glass stopcocks.

• Material: Ductile Iron
• Power: Hydraulic
• Size: 2 Inch
• Condition: Good
• Surface: Polished
• Pressure Rating: PN10-PN420

• Material: cast iron
• Code: 5542
• Model: BFV-SLS-CI-SS304d
• Type: Wafer Type
• Size: 65mm to 150mm
• Application: To Regulate flow from close to full opening quickly

• Specialities: Rust proof, Sturdy design, High durability.

• Manufacturing Standard: API609/ BSEN 593 (BS 5155)
• Size Range: 50 to 600 mm
• Pressure Ratings: PN10, PN16

SABION is pleased to offer top-of- line product in pipeline flow control. SABION wafer and lugged Butterfly valves have been developed with extensive application, design and manufacturing expertise. These products are produced by employing modern manufacturing practices under a robust quality assurance system. These practices ensure consistent product quality and dependable performance. SABION is pleased to offer top-of- line product in pipeline flow control. SABION wafer and lugged Butterfly valves have been developed with extensive application, design and manufacturing expertise. These products are produced by employing modern manufacturing practices under a robust quality assurance system. These practices ensure consistent product quality and dependable performance. FEATURES Top plate double drilled to fit ISO 5211 dimensions and standard secondary bolt circle dimensions Unique centre-lock seat design virtually eliminates any seat movement during the seating and un-seating of the disc Unique stem retention system to provide blow-out proof stem and easy assembly and disassembly of valve Heavy duty one piece wafer and lugged wafer body designed to withstand specified pressures Nylon coated high strength disc with hand polished disc edge and hubs ensures excellent corrosion resistance to several chemical media Heavy duty square grooved seat design with moulded O-ring seals to serve as flange gasket One piece stem with close tolerances double D drive eliminates the need for disc screws or taper pins Heavy duty bearing absorbs the forces acting on the stem/disc assembly due to line pressure APPLICATIONS Water works Power plants Sewage plants Process industries Chemical and petrochemical plants

• Material: Metal
• Application: Water Fitting
• Feature: Casting Approved, Durable
• Valve Size: 1/4inch, 1inch, 2inch, 3inch
• Power: Manual

Ranging in size from 50 mm to 300 mm, the Swing Check Valves that we provide are in high demand. They have been crafted in our very own factories by our skilled team. The highly advanced machinery that we employ ensures a smooth finish to the products. Each product is stringently verified before being dispatched for supply. If you would like further details, kindly get in touch with us in person or over the phone.

• Brand Name: HAWA Valves

We supply every type of Valve. Specially butterfly valve,(center disc design, off center disc design) gate valve,(bolted bonnet api 600, pressure seal bonnet, through conduit api 6d, through conduit api 6a) plug valve,(pressure balanced, pressure balanced) double block and bleed valve,(double block & bleed, double block & bleed, double block & bleed) globe valve,(bolted bonnet, pressure seal bonnet, din) check valve,(dual plate, bolted cover, pressure seal cover) ball valve(fully welded,1 piece, top entry2 piece, trunnion mounted3 piece, trunnion mounted1 piece, floating, 2 piece, floating, 3 piece, floating) in almost each and every size. Category

• Technics: Forged
• Handle Operated Sizes: 2”x1”, 2”x2” , 3” x 3”
• Gear Operated Sizes: 2”x2” , 3” x 3”
• Condition: Good
• Power: Hydraulic
• Finish: Coated
• Surface: Polished

• Application: Industrial
• Features: Easy to install , Precise size , Accurate dimensions

Cast Iron Butterfly Valves, Foot Valve, Knife Gate Valve, Flanges

Ball Valves, Butterfly Valves, Pneumatic valve Automation

Ball Valves, Gate Valves, Check Valves, butterfly valves blowdown valves

Ball Valves, gas flow control valves, forged check valves

Batching Plant, Transit Mixer Thermo Switch, cleaning sponge balls, Filter

Gate Valves, Check Valves, gland flange, Ball Valve, Strainers

Ball Valves, contract labour supplier, tapping machinery, Limit Switch Box

Ball Valves, Pressure Regulators, Pressure Reducing Station

Ball Valves, Ball Valves, Ball Valves, wafer swing check valve

Dual Plate Check Valve, lift check valves, Ball Valves, Air Valves

Ball Valves, Gate Valves, pneumatic knife gate valves, Knife Gate Valves

Leader Check Valve, C Brand Malleable Iron Pipe Fittings