Level Sensors Dealers in Vastrapur, Ahmedabad

The P7620A industrial pressure transmitters/transducers are ideal for general purpose industrial applications with considering the performance, reliability and cost. The output signal of the sensing bridge converts to a standardized current or voltage signal through surface mount technology circuit board. This high level signal output with very low noise system is packaged in a rugged stainless steel housing to resist the harsh and extreme environment conditions. Each transmitter is inspected and calibrated to ensure its quality. FEATURES • Temperature compensated • Built-in Amplifier • High level current Output Signal • EMI/RFI protected • Compact construction • Shock and vibration resistance • Zero and span adjustments • False system shutdown prevention SPECIFICATIONS Performance characteristics: Accuracy at 25℃ (linearity, hysteresis, repeatability)≦±0.5% F.SStability at 25℃ ≦0.4% F.S./yearThermal Effect ≦±0.08% F.S./ ℃ Environment characteristics: Media temperature range: -25… +85℃Ambient temperature range: 0… +70℃Storage temperature range: -25… +85℃Compensated range: -40… +135℃Weatherproof rating: IP 65

• Accuracy: ±0.1%
• Range: 0.00001 to 9.99999
• Resolution: 0.1 mm
• Output Units: m, cm, dm, mm, ft, in
• Digital Output: Serial (UART)/ SDI12
• Electrical Interface: RS485/ RS232/ SDI12

The KDS-181 Bubbler Based Water Level Sensor measures water level by detecting the pressure required to force air through a submerged tube. It uses gage pressure sensors for automatic atmospheric pressure compensation. The technique is highly suitable for measurements in hazardous areas and for remote, automated, in-situ observatories. The air tube is the only submerged part of a bubbler system and is easily replaceable when damaged. The sensor is hence, ideal for areas where damage due to corrosion, clogging, contamination, debris, lightning, or vandalism is likely to occur. It can be set up for autonomous measurement as well as be a slave to a host system.   Features: Offset-drift compensation for consistent accuracy Bubble tube cleaned by pumping high-pressure air Low maintenance required

We offer ground penetrating radar, the viy series ground penetrating radar (gpr) is used for location and analysis of underground anomalies using electromagnetic pulse radiation. Operation principle of the gpr is based on surveying media illumination by electromagnetic impulses with following echoes analysis because of impulse reflection or scattering by various discontinuities. The gpr is suitable for searching of both metal and dielectric targets (stratiform structures, pipes, voids, building constructions etc.). For more detail visit us: http:www.cablelocator.in

• Brand Name: Honeywell
• Response Time: Less than 2 ms
• Pressure Ranges: 1 bar to 46bar, 100 kPa to 4.6mPa, 15psi to 667psi
• Temperature range: -40 C to125 Deg C
• Total Error Band: +/- 2%
• Life: 10 million Cycles

fuel level sensors, Changeover Switches, electronic autogas devices

level sensors, draw latches, 2 Way Joint & Plugs, Foldable Handles

Temperature Sensors, Temperature Indicator, Thermocouple

Temperature Sensors, pressure measurements instruments, Thermometer

lpg cng level sensor