Lightning Arresters Dealers in Ahmedabad

a typical lightning arrester, also called surge arrester, comprises a high voltage terminal made of copper of aluminum mounted on top of a building. It is electrically connected to the ground terminal through a wire to protect the building in the event of lightning. If lightning strikes the building, it will preferentially strike the lightning rod and be conducted harmlessly to ground through the wire, instead of passing through the building where it could start a fire or cause electrocution. Lightning arresters can be commonly seen mounted on tall buildings, monuments, towers, water tanks etc. a very important point worth noting in this regard is that a lightning arrester or lightning protection system as a rule never stops the action and effects of lightning. However, it provides ample protection and insurance against the damage to the building and electrical devices.

Electrical overhead corporation is a leading certified manufacturer of Lightning arrester in gujarat. Lightning arresters are installed in high voltage electric facility containing equipments

• Type: Lightning Arresters
• Material: Ceramic
• Shape: Disc
• Application: Control Panels
• Tensile Strength: 0-25Mpa
• Feature: Easy To Install
• Warranty: 1year
• Temperature: High Temperature

We are offering franklin lightning arrester. When the electrical potential between two clouds or between a cloud and earth reaches a sufficiently high value the air becomes ionized along a narrow path and a lightning flash results which can extend upto multiple kilometers. buildings are protected from lightning by metallic lightning arrestors or surge arrestors extending to the ground from a point above the highest part of the roof. The arrestor has pointed edges on one side and the other side is connected to a long thick copper stripwire (down conductor) which runs down the building and connects to the earthing system. in the event of lightning falling on the building, the lightning arrestor directs the charge through down conductor and into the earth through the earthing system, safely.

• Arrester Length: 3mtr, 5mtr, 6mtr
• Arrester Diameter: 70mtr, 105mtr
• Country of Origin: Made in India
• Radius Coverage Area: 70mtr, 105mtr
• Air Rod Height: 3mtr, 5mtr, 6mtr
• Surface Finishing: base plate
• Net Weight: 10kg to 15kg
• Suitable For: Industrial use
• Rod Diameter: 40mm, 48mm, 58mm

A lightning Arrester is a metal rod or metallic object mounted on top of a building, electrical power systems and telecommunications systems electrically bonded using a wire or electrical conductor to interface with ground or "earth" through an electrode, engineered to protect the building and the electrical power system from the damaging effects of lightning strike. If lightning targets preferentially strike the rod and be conducted to ground through the wire, instead of passing through the building, where it could start a fire or cause electrocution. The typical lightning arrester has a high-voltage terminal and a ground terminal. A lighting arrester made from GI rod and copper bounded rod in form of single point and multipoint's system.

• Country of Origin: Made in India
• Material: Copper
• Phase: Three Phase
• Brand: SS
• Frequency: 50/60Hz
• Number of Spike: 4
• Length: 1.5 m

We are an eminent and leading trader of surgearrestors.

• Material: Copper Bonded
• Certification: Yes
• Country of Origin: Made in India
• Length: 1 meter, 2 meter
• Mounting Arrangement: FRP Pipe, FRP Insulator base, Metal Base
• Radius Cover: 10-20 meter based on Lightening Strike and Intensity of Lighting.
• Thickness: 14mm, 17mm, 25 mm
• Brand: Samptel

• Material: Pure copper,Copper clad steel
• Brand: Ksquare
• Arrester Type: Distribution Type
• Protection Angle: 65 degree
• Current gradient: Less than 5KA
• Grounding resistance: Less than 10 ohm
• Number of Spikes: 5
• Length: 1000 MM

A lightning Arrester is a metal rod or metallic object mounted on top of a building, electrical power systems and telecommunications systems electrically bonded using a wire or electrical conductor to interface with ground or “earth” through an electrode, engineered to protect the building and the electrical power system from the damaging effects of lightning strike. If lightning targets preferentially strike the rod and be conducted to ground through the wire, instead of passing through the building, where it could start a fire or cause electrocution. The typical lightning arrester has a high-voltage terminal and a ground terminal. A lighting arrester made from GI rod and copper bounded rod in form of single point and multipoint’s system.

Lightning arresters are installed on many different pieces of equipment such as power poles and towers, power transformers, circuit breakers, bus structures, and steel superstructures in substations. A substation is a high-voltage electric facility containing equipment to regulate and distribute electrical energy. While some substations are small with little more than a transformer and associated switches, other substations are large and complex. Lighting Arresters are protective devices for limiting surge voltages due to lightning strikes or equipment faults or other events, to prevent damage to equipment and disruption of service. Also called surge arresters.

• Material: Copper
• Application: Electric Industry
• Operating Temperature Range: -20 to 80 Deg C
• Arrester Length: 1 Mtr
• Packaging Type: Box
• Weight: 250 Gram
• No Of Antenna: 5
• Phase: Single Phase

• Leak Protection Current: 10mA
• Power Requirements: AC 220V +/-10% 50-60Hz; 24VDC
• Dimensions: 89(H) x 483(W) x 350(D) mm
• Net weight: 7.9 kg

  Features                                 Download PDF * The OD-25L protects a PA system with outdoor speakers from potential damage caused by thunder storms and lightning. Four independent channels provide protection for up to 20A of audio power per channel. When a channel exceeds the threshold, the speakers are disconnected from the rest of the system to prevent damage to other equipment.Specifications* Input : 4 Channels (CH1-CH4) 70V/100V audio signal* Output : 4 channels, 70/100V, 20A, audio signal, Active out : OV signal* Lightning Protection : IEC529/EN60, 529 protection grade satisfied : IP 20* Overload Protection : 165-300V, peak* Rated Discharge Current : 30kA

Lightning arrester is a device used on electrical power systems to protect the insulation on the system from the damaging effect of lightning.

Surge Arrester, Laser Diode Driver, Surge Protection Device

ESE Lightning Arrester, Chemical Earthing, RCC Chamber Cover, pvc chamber

Surge Arresters, Chemical Earthing Electrodes, Engineering projects

Lightning Arrestor, Solar Structure, Steel Tubular Poles, octagonal pole

Lightning Arrestors, Solar EPC, Electrical Accessories, ACDB Box, dcdb box

ESE Lightning Arrester, FRP Earth Pit Chamber, Earthing Compound

CONVECTIONAL TYPE SOLID LIGHTNING ARRESTER, Gi Earthing Electrodes

copper lighting arrester, gi strip, Earthing Rod, Copper Strip

lightening surge arresters, Brass Electrical Parts

Copper Lightning Arrester, Binding Wir, Copper Bonded Earth Rod

copper earthing electrode lightning arrestor, back fill compound

Lightning Arresters, Cable Jointing Kits, Earthing Materials