Linear Bottle Washing Machine Dealers in Vatva, Ahmedabad

We are delivering a premium quality range of High Speed Linear Bottle Washing Machine to our highly valued clients. These are highly admired for their accurate dimensions and varied application specific designs. Our machines efficiently eradicate germs & dirt from the bottles and operate on the rotary principle. We are able to give all type of different application. The machine can modified as per client requirement.We are known for our best service and quality managment. The machine technical detail is as below. We give more information on your request...... Machine Model: CPTLW - 120 (Tunnel Type) Vial:Min. 5 ml to Max. 30 ml. Output:120 Power Require:5 HP, 440 volts, 3 phase Net Weight :1250 Kg. Apx. Gross Weight:1450 Kg. Apx. Machine Model: CPTLW - 240 (Tunnel Type) Vial:Min. 5 ml to Max. 30 ml. Output:240 Power Require:5 HP, 440 volts, 3 phase Net Weight :1500 Kg. Apx. Gross Weight:17000 Kg. Apx.

• Suitable for :: 30ml to 200ml Bottles,
• Bottle Size :: 32mm to 60mm Diameter and 38mm to 180mm Height*
• Washing type :: Linear Continues Motion with Stationery Drive
• Air Consumption :: 12 to 15 CFM
• Water Consumption :: 450 to 600 Litre per hour for each washing zone (depending on bottle size)
• Washing Zone:: Five zone can be set as per required sequence
• Pumps and Water Tank :: 2nos. Each 6000 Ltr. Per our capacity Centrifugal Pump and 50 Ltrs. Tank
• Compressed Air :: 30 CFM
• Electrical :: 415 VAC 3 Phase 50Hz and 220 VAC Single Phase Power Supply (50/60 Hz)
• Power :: 4.0 H.P.
• Speed :: Max. 120 Bottles per minute depending on Bottle Size
• Conveyor Height :: 815-940 mm
• Overall Dimensions :: 2700 mm (L) x 1400 mm (W) x 1550mm (H)

Bottles pushed from Infeed tray and then move on Wiremesh conveyor Belt, which align the Bottle in correct position, to enter into the carrier pocket with help of oscillating guide rails. Oscillating arm deliver the Bottle inside pocket in mouth down position over spraying nozzles. Multijet sprayers fixed at the top cause the total External and Internal surface to be Washed. To avoid any possible cross contamination between two different waters. Each washing station is provided with an independent Circuit. Carrier pocket is moving with indexing motion. When the baskets have completed their motion the needles are lifted. They penetrate the Bottles, Spraying Jets of water or compressed air then Return Down. The baskets movement then advances by one Station. Each station of Bottles passes through the washing cycles selected. The duly washed Bottles then delivered to the Out feed tray with neck opening upward and then automatically re ordered to a next Operation.   Salient Features: Machine structure made by SS 304 with argon welded. – SS filter housing & Nozzles made from SS 316. Imported Gear Box, Main Drive and Conveyor. – Infeed Conveyor Belt system. AC Variable Drives for Main drive and conveyor. – Pumps with tank (80 Liter Each) 2 Nos. Special Pocket system ensures easy and trouble free washing of Bottles for outer & inner side. – Water recycling arrangement is possible as per client’s requirement. A special clutch device is available for stoppage of the machine in the event, Bottles is over turned or over diameter. – Machine also equipped with external washing of Bottles. Machine provided with PLC (OPTIONAL) as per customer requirement.

Completely CGMP Model. Simple structure, Stable function, Easy operation and Virtually low maintenance cost. Very Compact & modular construction suitable for handling wash of 60ml to 250ml Bottles (without any change parts). Machine also suitable for different size of bottles up to 3 Litter Bottles. Machine is fitted with two emergency switches i.e one at out feed and other at infeed. Totally fabricated from SS materials with basic frame (cGMP Model). All parts coming in contact with washing zone are made from SS materials Machine equipped with safety devices to ensure smooth and silent operation with HIGH rated output. Machine totally rigid and withstands continuous operation for long working hours without any trouble. Washing chamber having various spray zones. The machine will be provided with SS pumps and SS tanks

The Automatic Linear Tunnel type Bottle Washing Machine Model BW-120, is suitable for Round as well as Flat Shaped Glass, PET, Plastic Bottles sizes of appx. 30ml to 200ml pack size with maximum speed of 120 Bottles per minute. Machine construction in fully Stainless Steel finish including machine frame structure. All parts coming in contact with Washing Zone and Jets are made from SS 316L Materials. Machine with applications in Pharmaceuticals, Foods, Distilleries and many more industries. Intermittent handling of containers ensures the maximum time for washing and also saves the Water through intermittent Washing system and machine spray water once the nozzle start entering the bottle neck. Machine also offers various customized options for washing sequence as per requirements. Washing process takes place with Five different Washing Zones each with 10 nozzles for optimum washing. Machine also equipped with external washing of Bottles.   ALSO WE HAVE RANGE OF VIAL AND BOTTLE WASHING MACHINES WITH SPEED RANGE FROM 60 TO 250 PER MINUTE.   TECHNICAL SPECIFICATIONS Suitable for : 30ml to 200ml Bottles Bottle Size : 32mm to 60mm Diameter and 38mm to 180mm Height* Washing type : Linear Continues Motion with Stationery Drive Air Consumption : 12 to 15 CFM Water Consumption : 450 to 600 Litre per hour for each washing zone (depending on bottle size) Washing Zone: Five zone can be set as per required sequence Pumps and Water Tank : 2nos. Each 6000 Ltr. Per our capacity Centrifugal Pump and 50 Ltrs. Tank Compressed Air : 30 CFM Electrical : 415 VAC 3 Phase 50Hz and 220 VAC Single Phase Power Supply (50/60 Hz) Power : 4.0 H.P. Speed : Max. 120 Bottles per minute depending on Bottle Size Conveyor Height : 815-940 mm Overall Dimensions : 3000 mm (L) x 1400 mm (W) x 1550mm (H)

• Output / Speed: 60 BPW
• Power Required: 3-5 HP, 440 V, 3 Phase, 50Hz.

linear bottle washing machine application & process : high speed linear bottle washing machine is most ideal for round bottles and finds wide application in pharma, food & beverages industries. The automatic loading arrangement facilities loading of bottles on to ss wire mesh conveyor through feed conveyor or bottles are pushed manually from feed table. This saves manpower as bottles are feed into pockets automatically. The automatic unloading mechanism consists of unloading bottle continues on to turn table (optional). three-cycle rinsing allows flexibilities of various wash cycles such as fresh water, dematerialized water etc. As per the rinsing requirement of bottle. All the pumps are made of ss and all the water contact parts are made of ss 316 on a heavy base of ss structure. In tunnel design is such that separation is maintained between feeding zone and discharge zone of the cleaned containers. All the mechanical drives are separated and isolated from the washing zone. Approved materials only are used for construction, together with a careful choice of components, thereby taking in to consideration all aspects of sanitation and consequence complying with the pharmaceutical g.m.p. Requirements. salient features : designed as per cgmp - current good manufacturing practices compliance machine is made from aisi 304. all parts coming in contact with washing zones / jet are made from ss 316 materials. simple structure, stable function, easy operation and low maintenance cost. very compact, rigid & modular construction meeting cgmp norms. the machine is suitable for wash of 60 ml to 250 ml round bottles without any change parts. change parts require for flat bottles & if change of neck size. washing chamber having various spray zones. high-pressure spray nozzles ensure perfect wash of bottles. interchangeable wash sequences. water re-cycling arrangement is possible as per customer's need. machine is totally rigid and sturdy for continuous trouble free operation for long working hours. higher capacity centrifugal pump to wash bigger container. variable speed drives.

Linear Bottle Washing Machine, packaging machineries

CPLBW Automatic Linear Bottle Washing Machine is used for washing of bottles. Bottles will be pushed from in feed tray and then move on wire woven conveyor belt, which align the Bottle in correct position, to enter in to the carrier pocket with help of oscillating guide rails. Oscillating arm deliver the Bottle inside pocket in mouth down position over spraying nozzles. Multi jet sprayers fixed at the top cause the total external and internal surface to be washed. To avoid any possible cross contamination between two different waters. Each washing station is provided with an independent circuit. Carrier pocket is moving with indexing motion. When the baskets have completed their motion the needles are lifted. They penetrate the bottle, spraying jets of water or compressed air then return down. The baskets movement then advances by one station. Each station of bottle passes through the washing cycles selected. The duly washed bottle then delivered to the out feed tray with neck opening upward and then automatically re ordered to a drying or packing line with back pressure. Special Pocket system ensures easy and trouble free washing of bottles from outer and inner side. Indexing motion makes easier for Multi jet Nozzles / syringes to move inside bottle, when it is in stationery motion. Washing cycles can be adjusted as per customer requirement. User friendly machine, even semi skilled operator can operate the machine very easily. Low RPM but High out put. Imported pumps are provided in the machine, which gives a good pressure to wash bottles properly. Imported Gear Motor for Main drive and conveyor. A.C. Frequency drive for Main drive and conveyor. Pumps with tank (60 liters each) 3 nos. In feed conveyor belt system.

Linear Bottle Washing Machine, air jet cleaning machine, Packing Conveyor