Load Cell Dealers in Ahmedabad

CAPACITY UP TO 120 KGF         APPLICATIONS   Check Weighers. Bagging Machines. Bench, Counting & Postal Scales.          

Model 960510 is a Strain Gage based low profile bending beam Load Cell and is ideal for Bench, Counting, Floor, Postal and Retail Scales. It is designed for low eccentric load sensitivity. It is Constructed from Anodized Alluminum Alloy. capacity are 1.5, 2, 2.5, 3, 5,10, 15, 20, 30, 40, 50, 75, 100 & 120 - kgf

Ball and Cup Load cells surpass Its Competitors in Terms Of Resistance against Side Forces. It Is a Fact That the Major Reason behind Load cell Manufacturing Is the Horizontal Side Forces Created by the Vehicles during Brakes and Sudden Start-Ups. That Is why, Scales with Column Type Load cells require Construction Absorbing Side Forces. However, Such Construction As Rocker Supports, Tensions Rods, Buffers, Etc Need Maintenance And Have An Adverse Impact on Weighing Accuracy. applications, the double ended shear beam offers a number of advantages over other designs. Units like the one shown opposite have built-in jacking bolts which can be used to support the weighing structure during installation thus allowing the live load cells to be fitted just prior to commissioning, avoiding damage. The load cell is designed to rock on its mounting base to accommodate misalignment in mounting surfaces whilst still being retained. The mounting arrangement also permits limited movement to allow for thermal expansion and contraction as well as lift off protection. Double-Ended Shear Beam Type CUP & BALL TYPE concept in load cell design provides the following advantages over the conventional compression type load cells. 

• Country of Origin: Made in India
• Ambient temperature: -25 to 70 Deg C
• Range: 85-1500 mm
• Switching frequency: 9 Hz
• Operating voltage: 9-30 VDC
• Brand: Baumer
• IP rating: IP67
• Pressure rating: Maximum 6 bar
• Material sensing surface: PTFE

• Material: Alloy Steel, Stainless Steel
• Certification: ISO Certified
• Application: Industrial Use
• Power Source: Elecrtric
• Output: 1mv, 2mv
• Rated Load: 100kg, 150kg
• Temperature: 20-25deg C
• Automation Grade: Automatic

Key Features : Pre-Calibrated technology (Collaboration with European technology) No Need to Make Calibration (Just Plug & Weighing) Strong Digital Signal provide accurate weighing Profitability to Highest Weighing Accuracy Nickel Plated Tool Alloys Steel True Hermetically Sealing Inbuilt Lightning Protection - Electronic Gas Discharge Tubes Inbuilt Temp. Protection & Surge Protection No Corner Error No Analogue to Digital Converter Predictive diagnostics simplify troubleshooting Two Years Warranty in Eagle Make Load Cells Technical Parameters : Rated Load (E-Max) - 20, 30, 34.5, 40, 50, 60 t Rated Output (mV/V) - 2.00 ± 0.01 Non-linearity - ±0.02% F.S Hysteresis - ±0.02% F.S Repeatability - ± 0.01% to ± 0.02% F.S Creep (30 minutes) - ± 0.02% F.S Zero Balance - ± 1.00% F.S Temperature Effect on Zero - ±0.02% F.S Temperature Effect on Output - ±0.02% F.S Protection Class (IP) - IP68 Communication BPS - 9600/19200 Communication Mode - RS 485 Insulation Resistance (O) - 3000M Excitation Voltage - 7 to 15V DC Compensated Temperature Range - (-10oC to +50oC) Operation Temperature Range - (-20oC to +60oC) Safe Overload - 150% F.S Ultimate Safe Overload - 200% OF R.C Cable - F4 x 16m

• Type: Load Cell
• Material: Stainless Steel
• Certification: ISO Certified
• Application: Industrial Use
• Color: Black
• Power Source: Elecrtric
• Country of Origin: India
• Output: 1mv,2mv,3mv

Suraj is the major manufacturer of Load Cell (SS 310) that is light weight, compact and highly economical. This load cell is apt for harsh applications such as tool steel construction. Specifications Standard Capacities75, 100, 150, 200, 250, 300 - kgfExcitation Voltage10 VDC- Maximum 15 VDCNominal Output2.0 m V VNon - Linearity< ±0.025% FSO Hysteresis< ±0.02% FSONon-Repeatability< ±0.01% FSOCreep (30 minutes)< ±0.03% FSOZero Balance±1.0% FSOInput Resistance390 ± 15 OhmsOutput Resistance350 ± 3 OhmsInsulation Resistance (50 VDC)> 1000 Mega OhmsCable Length (4 Core Screened)2 mtr. MinimumSafe Overload of Rated Capacity150%Ultimate Overload of Rated Capacity250%Allowable Side Load--Side Load Discrimination--Temp. Compensated Range0-60 CTemperature Effect on Output< 0.0015% FSO 0 CTemperature Effect on Zero< 0.0020% FSO 0 CPlatter Size-Eccentric Load Effect< 0.02% of FSO at 13 rated load placed within the specified sized platterDeflection< 0.5 mmat FSOTightening Torque5 m.kg.Finish & ConstructionNickel Plated Tool Steel

Global Impex Corporation is a professionally managed organization that has considerable expertise in dealing with different types of beam load cells. We are a renowned Load Cell Manufacturer from India. We are specialized in the manufacturing of compression load cell which is completely free from any leakage. We provide beam load cells and compression load cell which strictly work on the principle of conversion of mechanical weighbridge into an electro-mechanical weigh bridge. Our provide beam load cells and compression load cell are completely corrosion resistant. We provide beam load cells and compression load cell etc., at the most acceptable price.

• Theory: Resistance Sensor
• Output: Digital Sensor
• Capacity: 500g
• Weight: 22.5 Kg

Reckoned for our extensive array of products, we efficiently serve our customers from Ahmedabad(India). As our payment methods are practical and convenient, we are highly recommended by the clients. We provide option to pay in cash as well as through bank transfer.

Available as single or double ended shear beam (the latter being more common in weigh­bridges), this type of load cell can offer slightly lower profile and less sensitivity to side-loads, but often with poorer sealing (potted) and corrosion resistance (alloy steel). These load cells are more advantageous in silo vessel weighing where rigid connections and head-room constraints are an issue as compared to a vehicle weigh­bridge where sealing and protection are very important.

With the objective of bringing forth only quality products in the market, we procure Hengstler Encoder from the trusted sources of the market. We are one of the reputed Suppliers of Hengstler Encoder. It is well tested and therefore, buying Hengstler Encoder from us will be the safest option for the buyers. One can place retail as well as bulk orders for the encoder with us.

• Brand Name: VALIANT
• Material: Alloy steel
• Application: Weighbridge, Industrial
• Output: 2mv/v
• Model Number: VI/D/30mt
• Place of Origin: Ahmedabad

Cup Ball Type Load Cell (Analogue & Digital ) Applications: Truck weighbridge Tank and hopper weighing Tensile testing Features: 5 Mt. to 40Mt Capacities. Complete environmental Protection -IP68 class. Standard output 2.0m VV available. Hardened tool steel construction. Good side force and shock resistance. Full mounting hardware are provided with the load cell

• Brand Name: Revere
• Material: SS

We are offering single column type load cell asc2 application : track weighbridge.

FEATURES 20 Kgs.. to 20000 Kgs.. Capacities available. High Alloy Tool Steel construction for resistance against shock and overload. Complete Environmental Protection -IP67 class. Standardized output (3.0 ± 0.25%) available on request. APPLICATIONS Applications Conversion of Mechanical Scale to Electronic. Tank, Hopper & Bag Weighing. Force Measurement Tension & or Compression Dynamometer. Hanging & Crane Scale Industrial Automation DESCRIPTION Ultra Precision Strain Gauge based 'S'-beam Load Cell is Versatile, compact and rugged. It is used for tension measurements, tensile testing, weighing, industrial automation and research applications. It is universal Load Cell Suitable for both-tension and compression modes. STANDARD CAPACITY 20, 30, 50, 75, 100, 150, 200, 250,300, 500, 750 - Kgs. 1,1.5,2, 2.5,3, 5, 7.5, 10, 15, 20-Ton.

Strain gauge type load cell – a tension transducer for web tension monitoring & controlling is available in various ratings 5 Kg to 1000 Kg. For ratings beyond 150 Kg, Up to 1000 Kg, these are manufactured in compression& tension type constructions, cater to most of the popular sizes load cells & applications. All Load Cells are excellent in linearity and repeatability with a nominal output of 1mV/V or 2V/V depending on applications.

• Brand: Autonics
• Model Name/Number: E50S8-500-3-T-1
• Lot No.: UB19CR
• Shaft outer diameter: 8mm
• Max. response frequency: 300kHz
• Max. allowable revolution: 5000RPM
• Starting torque: 0.0784Nm
• Resolution: 1000P/R
• Output phase: A, B, Z
• Control output: Totem pole
• Voltage: 5-24VDC +-5%

• Application: Industrial
• Color: Black

• Operating Voltage.: 5 Volt Dc.
• Pulse/Revolution.: 100 PPR
• Cable Length(mm): 500mm
• TS series: OIS 28
• Shaft Type.: Solid Shaft
• Encoder Type.: Incremental
• Output Form: Open Collector
• Signal Output.: A, B, Z
• Outer Diameter(mm): 28mm
• Shaft/Bore Diameter(mm): 5mm
• Operating Environment: IP 50

Since establishment, our organization has associated with leading traders and dealers. Thus, we serve patrons in Ahmedabad(India) without any problem. For the convenience of the clients, we issue an invoice to them including the details of the sale transaction as well as indicating the quantities, products as well as agreed price. Thus, we maintain transparency in our dealings and payment procedures.   Features : Provides excellent color contrast sensitivity, detecting 16 levels of gray scale.       Optimizes contrast by automatically choosing a red, green or blue sensing LED.       Maximizes performance in low-contrast or high-gloss applications, and when registration marks are inconspicuous       Offers configurable light- or dark-operate outputs and optional 30 milliseconds ON/OFF-delay.       Performs 10,000 actuations per second (10 kHz switching frequency).

load cells from last 25 years India. Premium quality of Load Cells to meet client’s requirement for different machinery all over the world. For ratings beyond 150 Kg, Up to 1000 Kg, these are manufactured in compression& tension-type constructions, cater to most of the popular sizes load cells & applications. All Load Cells are excellent in linearity and repeatability with a nominal output of 1mVV or 2VV depending on applications. Load Cells meet international standards and high quality for longer durability

• Brand Name: Schlafhorst
• Country of Origin: Made In India
• Features: High sensing efficiency, Compact design, Reliable usage

Environmental seals,stainless steel shielded cable,surge protection,heavy-duty coatings and rugged construction help protect Eagle Weighbridges from adverse weather conditions and operating environments. FEATURES Ball and Cup Load cells surpass Its Competitors in Terms Of Resistance against Side Forces. It Is a Fact That the Major Reason behind Load cell Manufacturing Is the Horizontal Side Forces Created by the Vehicles during Brakes and Sudden Start-Ups. That Is why, Scales with Column Type Load cells require Construction Absorbing Side Forces. However, Such Construction As Rocker Supports, Tensions Rods, Buffers, Etc Need Maintenance And Have An Adverse Impact on Weighing Accuracy. applications, the double ended shear beam offers a number of advantages over other designs. Units like the one shown opposite have built-in jacking bolts which can be used to support the weighing structure during installation thus allowing the live load cells to be fitted just prior to commissioning, avoiding damage. The load cell is designed to rock on its mounting base to accommodate misalignment in mounting surfaces whilst still being retained. The mounting arrangement also permits limited movement to allow for thermal expansion and contraction as well as lift off protection.   BENEFITS Greater adverse load capability. Lower sensitivity to adverse loads. Lower height. Lower creep and faster return to zero after load removal. Higher tolerance and environmental protection. Better sealing and environmental protection. Freedom from barometric effect. Greater flexibility of application. The above advantages make the double-ended shear beam load cells superior over the conventional compression load cells and are more popular now a days in developed countries for various fields applications. A brief explanation on the above advantages is given below and the literature provided speaks in detail about the design concept, performance and applications of double-ended shear beam load cells.

• variety of Range starts from: 10 ppr to 10,000 PPR
• Available in: Solid shaft,hollow shaft,Incremental,push-pull,Absoulte type
• Body Diameter starts from: 30 mm to 80 mm

Double ended shear beam load cell is designed to withstand rigorous shock loads prevailing in heavy duty weighments. It is fully sealed for water proofing for IP-68 degree of protection class and can be supplied with suitable weighing module for weigh bridge installations.