LT Cast Steel Valves Dealers in Memco, Ahmedabad

• Material: Brass
• Usage: Water Fitting

Salient Feature Meets manufacturing standard design as per BS 5155/ API 609 / IS 13095 AWWA C-504 /ANSI B 16.34 and inspection testing standard as per API 598/ BS 6755 / MSS - SP -61. SPLIT body compact design for open/close cycle with very low torque. 2PC SPLIT body with replaceable PTFE seat type valves can be supplied on specified request. Multipurpose water design. REPLACEBAL/ Molded rubber seat in various material. 100% tight shut off in both flow directions. A fully universal body design ensures suitable for mounting between all popular standards (VIZ: - ANSI, BS, DIN, IS, JIS, etc.) Lower torque requirement because of bearing support to the shaft. The notch disc & band lever ensures locking of the valves in 8 intermediate positions in addition to close and open position. Option Log type body design available on request. Flanged end design butterfly available on request. Valves can be opened by manual gear unit or pneumatic /electrically actuator. PTFE lining / coating. Valves can be supply with PTFE lining /coating in corrosive application. Ring joint facings available in higher classes Body & disc supply in difference M.O.C such as CI -IS 210 GR. FG- 200, SG IRON GGG 40, ASTM A 216 GR. WCB, ASTM A 351 GR CF8 / ASTM A 351 GR CF8M Seat supply in difference M.O.C. such as 1) nitrile 2)epdm 3) hypalon 4) silicon 5) viton 6)neoprene 7) Stellited seating hard facing are provided on requestOffset disc design available in 350 NB above size butterfly valves. High performance metal to metal contact valves for high temperature application for hot gases. Alternatively device of the disc to shaft connection can be provided at our option. The valve can be supplied with matching pneumatic or electrically operated actuator for remote / automated control and operation. The design and technical data furnished here are subject to change due to continuous product development.   C/F:- Neck flange according to ISO -5211 hand lever can be locked through pad lock. Excellent flow control in quarter turn operation. Body & stem to tally protected from service fluid. Centrally mounted disc, shafts and bearings, therefore valves give higher cv valves. Face to face water short dimensions conform to BS 5155 / API 609 / IS 13095 / AWWA C 504. Uniflow direction installation. Pressure rating PN 10 / PN 16 Testing body : 1.5 * PN Seat : 1.1 * PN Temp range: - 20'c to 180 'c (depending on MOC)   Application COMPRESSED AIR PLANTS. CHEMICAL INDUSTRY. SUGAR INDUSTRY. DRILLING RIGS. GASES AND VAPOURS PLANTS. PAPER INDUSTRY. PHARMACEUTICAL PLANTS. MILK & FOOD INDUSTRY. AGGRESSIVE CHEMICALS. REFRIGERATION & AIR CONDITIONING PLANTS. HIGH VACCUM APPLICATION. COOLING WATER CIRCULATION. CONSTRUCTION INDUSTRY. WATER TREATMENT PLANT. PESULPHURISATION PLANTS.

We manufacture High performance Ball Valve as per international design and standard to get 100% Client Satisfaction and repeat order with total interchangeability, superior quality, workmanship & service. These Ball Valves come in Single Piece (12 to 4) Two Piece (1 to 8) as well as in Three Piece Design (12 to 12) to suit various critical, non-critical applications and pressure rating up to 1500 class in both full bore & regular (reduce) bore design.

• Valve Size: 50 Mm To 600 Mm
• Brand Name: Durga
• Material: Stainless Steel
• Country of Origin: India
• Usage: Industrial
• Diameter (mm): 50mm, 50-600
• Type: Industrial Valves
• Condition: New
• Finishing: Coated
• Warranty: 1 Year
• Temperature: -20 Degree C to 90 Degree C

With a complete system of total quality control to ensure that the products only conform to established standards of quality and reliability, we proudly introduce ourselves as the leading manufacturer and exporter of different kinds of Butterfly Valves. Butterfly Valves are quick-opening valve that consist of a metal circular disc or vane with its pivot axes at right angles to the direction of flow in the pipe, which when rotated on a shaft, seals against seats in the valve body. We lead in the manufacturing of different types of Butterfly Valves. With our very reasonable pricing, we are occupying the standard market place, fulfilling the demand of the industry. Applications : Water, Steam, Oil & Chemicals etc.Types : Wafer & Flange TypeSize : 1� TO 16�

• Material: Metal
• Usage: Water Fitting
• Color: Sky Blue
• Number Of Way: 2way
• Brand Name: Audco
• Packaging Size: 10 Pieces
• Finishing: Polished
• Warranty: 1 Year
• End Connection: Butt Weld
• Size/Dimension: 15 to 600 mm
• Usage/Application: Water
• End Connection Type: Flanged
• Installation temperature: -29

• Material: Casting
• Size: 25mm To 450mm
• Type: Wafer
• Technics: Gear Operated
• Power: Manual
• Feature: Casting Approved
• Port Size: 0.1mm-5cm
• Temperature: -20 Degree C to 80 Degree C

We are functioning from Ahmedabad(India); It is Supplier & Manufacturer of Wafer Butterfly Valve. We are capable of serving the clients in a short time span. Both of our online and offline payment processing methods are secure for transaction offering you a reliable assistance. We thus accept all kinds of cash payments as well as bank transfers. Our wafer butterfly valves are sturdy stainless steel constructions designed for high-strength, superior corrosion resistance and long service life.

We have numerous dealers and distributors associated with us to make our products available to buyers with ease and make timely delivery. We are a noteworthy name, engaged in offering qualitative lot of products that are the perfect outcome of premium material and modern work methods. Also, the material is sourced from the trusted places after complete quality checking.   Features : Accurate dimension Easy to install Robust construction

• Valve Size: 1inch, 1/2inch, 1.1/2inch, 1.1/4inch, 2inch, 3/4inch
• Material: Brass, Stainless Steel, Metal, Gun Metal, Cast Steel, Cast Iron, Carbon Steel, Carbon Steeel,WCB, SS 304
• Number Of Way: 2way
• Connection Type: Flanged
• Disc Material: Stainless Steel
• Brand Name: Zebco
• Usage: Water Fitting
• Color: Blue
• Certification: ISO 9001:2008 Certified
• Actuator Type: Gearbox
• Packaging Type: Wooden Box, Carton
• Country of Origin: India
• Warranty: 12 months

• Weight: 5Kg
• Packaging Type: Carton, Bag
• Valve Size: 1" to 12"
• Brand Name: MAP
• Material: Cast Iron
• Color: Blue
• Diameter (mm): 50mm
• Overall Length: 1" to 12"
• Condition: New
• used in pipe lines: flow control at desire pressures, etc

• Size Range: 1/2" to 24"

We offer a wide range of Butterfly Valves across the world. We use sophisticated technologies and machineries for the process of manufacturing our products. The considerable features of this product is, they are lower in cost to other valve designs as well as being lighter in weight, meaning less support is required .These Valves are used in isolating and regulating flow in the pipe lines. These Valves are available in the market at an affordable price.  

• Construction :: casted body, central disc, slim seal, wafer / lugs type, integrally moulded elastomer
• MOC:: CAST IRON / WCB / CF8 / CF8M / CF3 / CF3M
• Size Ranges :: 40 NB TO 600 NB
• Design And Mfg Std :: BS 5155 / API 609
• Inspection And Testing Std :: BS EN 12266 (BS 6755 – PART I) / API 598 / ISO 5208
• Face To Face :: BS 5155
• End Connections :: Wafer, full lugs, flange end
• Pressure Rating :: PN 10 / 16

Sharvil engineers offers slim seal wafer type, lugs type and flange end butterfly valves with integrally moulded elastomers like Nitrlile, EPDM, Silicon – rubber moulded. Centric disc having large range of materials varieties like CAST IRON, CAST STEEL, SS 304 / SS 304 L, SS 316 / SS 316 L etc. Pressure rating complies with PN 10 / P 16 and each valve has been passed through hydrostatic test pressure examination. Due to some special features like lower weight, low torque operation, short face to face, butterfly valves are highly demanded and advisable for mainly bigger size over conventional valves.

wafer butterfly valve Valve comply with BS 5155, API 609, MSS SP 67 and ISO 5752 valves designed to fit without gaskets between flanges drilled to ANSI 125, DIN. ND 10,16, BS 10 tables D E and F of BS4505 PN 1016 tables 6,7 and 8 of IS: 6418 and tables 11,15 of IS:6392.

We offer all types of knife edge gate valve in india at very affordable rates.

• Brand Name: Honeywell
• Material: Cast iron
• Size: DN50-DN900
• Nominal pressure: PN16
• Shell Test pressure: 24 bar
• Seal Test pressure: 17.6 bar
• Specialities: Smooth finish, Simple mounting, Unmatched quality

SEALMEACH Wafer Type, Slim-Seal, Center Disc Butterfly Valves are reliable, maintenance free shutoff with permanently gas-tight seal with an integrally moulded or replaceable elastomer body liner. SEALMECH butterfly valves are available with double gland sealing with P.T.F.E. Bearing Bush. These butterfly valves excess other conventional valves such as gate valve and globe valves in all aspects, especially in terms of light weight, less number of component, no flange gaskets required and economical operation and maintenance costs. SEALMEACH body seat design offer a very lower torque, tight shut off with zero leakage, and long life service. The slim-seal design valves are widely available with different combination of body, seat (liner) & disc materials to satisfy the need of most industrial application.   Center Disc, Slim-Seal Design Moulded/Replaceable Seat option Double Gland Sealing Arrangement Short Face To Face, Wafer Design Body Smooth, Easy, Maintenance Free Version Less Weight, Easy To Install   SEALMEACH High performances Butterfly Valves are also available with P.T.F.E. (PFA/FEP) lining and Nylon Coating on Disc. SEALMEACH covers Pneumatic Rotary, Quarter Turn Actuator / Pneumatic Cylinder operated valves along with accessories like Gear Box, Solenoid, Limit Switch, Valve Positioner, I/P Converter, Air Filter Regulator etc.

• white: white

Laxmi valve manufacturer is provide best quility product and service of manufacturering disc check, ball valve,spring loaded valve,fountain nozzle in ahmedabad,gujarat, india.

• Brand Name: JEKON
• Valve Size: 1.5" TO 14"
• Material: Stainless Steel, Aluminium, CAST IRON
• Pressure: Medium Pressure
• Port Size: 1.5" TO 14"
• Operator: PNEUMATIC
• Media: Air, Water, Fuel
• Temperature of Media: Normal Temperature
• Power: AIR
• Design Type: WAFER TYPE, SPERICAL DISC
• Model Number: JAABV
• Rotation (Degree): 90 DEGREE
• Operation Type: By Actuator
• Condition: New

• Brand Name: METALLIC
• Material: Stainless Steel
• Media: Water

We are the leading manufacturers, exporters and supplier of this products.

We offer ball valves as per international standards as well as per clients' specifications and requirements. These ball valves are used generally for quick shut off. Features One piece body Size:50 mm to 400mmPressure Class: BS 6755 Part-1Desing: BS5 155 ,Api609,Mss sp 67&iso5752Suitable to: BS 10 Table D,E,F,PN10/16    

Butterfly Valves, pfa lined valve, Fittings, pneumatic solenoid valves

Wafer Butterfly Valve, Globe Valve, industrial safety valves

Butterfly Valves are larger throttling valves for which we are considered a prestigious manufacturer for our highly reputed clients. They are low pressure valves with a simple 90 disc stem operation. They are also used as shut off valves as per the requirements although offering pressure drop through the valve opening.

Butterfly Valves, Industrial Valves, Ball Valves, Flush Bottom Valves

• Design Standard:  API 600 / BS 1414 / ASME B 16.34
• Face to Face:  ASME B 16.10
• Flanged Ends:  ASME B 16.5 R/F
• Buttweld Ends:  ASME B 16.5
• Testing:  API 598

when using larger throttling valve, using flanged piping connections, butterfly valve should be considered.generally butterfly valves are low pressure valve with a simple 90 disc stem operation. In some cases, they are used as shut off valves although offering pressure drop through the valve opening. the usefulness of the butterfly valves has increased with the development of elastomer liners with a wafer body which provide a tight shut-off. Such liners normally utilize back-up rings in the body to effectively support the liner. This provides sealing of the liner against the disc as well as the adjacent flanges. cast steel gate valve uotside screw & yoke type, boiled bonnet rising stem “nitrile” rubber is the most common liner material. Other plastomaric materials are available for higher temperatures & corrosion resistance.other advantages are intial low costs & ease of installation.lug wafer type valves and flanged end valbes are also available.       available on request• tefion lined valves• metal to metal seated• damper valve• flanged ends valves• gear operated• pneumatically operated• motor operated vale

Mnt make industrial valves & ejector c.i. Butterfly valve - wafer type, pn-10, c.i. - body, ss304- disc, ss410-stem

Butterfly Valves, Globe Valve, Knife Edge Gate Valve, Non Slam Check Valve

Butterfly Valves, Globe Valve, Knife Gate Valves, Swing Check Valves