Lubi Cast Iron Pumps Dealers in Ahmedabad

• Weight: 100-150kg, etc
• Voltage: 220V, 440V, etc
• Condition: New
• Power: 6-9kw, 9-12kw, etc
• Warranty: 1year
• Application: Agriculture

• Type: End Suction Pumps
• Material: Iron.Metal.Copper, Stainless Steel
• Weight: 100kg, 200kg, 300kg, 500kg
• Color: Black, Grey, Light Green, Sky Blue
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Application: Industrial Use
• Automatic Grade: Manual
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric, Hydraulic, Pneumatic
• Feature: Durable, Easy To Fit, Premium Quality
• Warranty: 1Year, 2years

“k.i” self priming monoblock pump is very precisely engineered pump which has very long life and high performance. Its unique design makes it best water pump in its class. ”k.i” has a success story in past 50 years in tea farms, grape farms, bungalows, commercial buildings, as a pressure washer in automobile industries, small houses. Shallow-wells, streams, springs, lakes or cisterns, schools, colonies, factories, contractors working on building constructions, special water tankers, special water plants. Etc  

• Warranty: 1 year
• Country of Origin: india
• Brand: Chetak

self primining monoblock pumps are mostly used for pumping water.

• Brand Name: Lubi
• Material: Cast Iron
• Finishing: Chrome Finish, Powder Coated, Polished, Unpolished
• Driven Type: Electric

-> Flow Range: 0.5 – 28 m3/h ->Head Range: up to 77 mtrs ->Rating (KWP): 0.37 – 7.50 kW ->Power Supply: 1 Phase /3 Phase

• Brand Name: Radial Pumps,Radial Pumps
• Material: C. I, C.S, SS-304 / 304L, SS316 / 316L, Bronze, Alloy-20, CD4MCU Hast alloy B & C, etc. Duplex stain
• Driven Type: Electric
• Pressure: High Pressure
• Usage: Industrial
• Type Of End Use: Industrial
• Certification: ISO 9001:2008 Certified, CE Certified
• Packaging Type: Wooden Box
• Type: Horizontal Centrifugal Pumps
• Warranty: 1 Year
• Country of Origin: India
• Head: Up to 150 mtr
• Pressure: Up to 15 Kg/cm2
• Model: RCP Series
• Capacity: Up to 2200 M3/hr
• Discharge Size: 25 mm to 300 mm
• Temperature: Up to 350°C
• Speed: Up to 3500 rpm

• Brand: shark
• Max Flow Rate: 200lpm
• Maximum Head (in m): 60mtr
• Model: ssp 1.0 to ssp 2.0
• Type of End Use: Residential, Commercial
• Features: Energy efficient Performance, Dry run protection, Zero maintenance and low noise level
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other

• Weight: 100-150kg
• Color: Grey
• Voltage: 220V
• Power: 1-3kw, 3-6kw
• Driven Type: Electric
• Warranty: 5years
• Application: Agriculture, Deep Well Pumping, Household
• Automatic Grade: Semi Automatic

We offer a wide assortment of stainless steel centrifugal pumps, which are extensively used in various engineering, fluid based and other industries for transporting of milk, juice, water, chemicals etc. Fabricated using high grade stainless steel, these pumps are acknowledged for high durability and flexibility. Innovatively designed, these pumps ensure trouble free performance and energy efficiency.   Applications Milk, cream, butter milk condensed milk Fruit 3uice, beer, wine, sugar syrup Vitamin solutions, sugar & confectionery. RO water, dm water, pure water. Water for injection (wfi) Vegetable oil, mineral oil, lub oil etc. Pharmaceutical formulations, syrup etc. Alkaline solution / alcoholic drinks. Acids, fine chemicals Bottling plants, soft drinks & distillery Food processing / liquid food stuffs Colour dyes and pigments / paints Descaling applications, paper & cement industries Water treatment plants Detergent, soaps, paste & shampoo Textile sizing, dyeing & finishing systems Natural cellulose fiber / synthetic fiber system Hot & cold water pumping.   Features As all pumps are made from rolled stainless steel, mechanical properties are far superior then cast material. Pore free, non-pitting and non-adhering smoother surface, so less friction tosses, and less crevice corrosion. Super finish surface also ensure no ingress or emission of germs or impurities during pumping or idling which is basic requirement of steriie / hygienic application Pump can handle liquids having viscosities up to 1500 centipoise Pumps are highly energy efficient and requires less npsh to function without cavitation The pumps can work under a vacuum of 720 mm of hg, suitable for vacuum evaporators. pumps are available with dosed/semi open impellers. The best elastomers are used in the pumps to provide optimum resistance for high temperatures and chemicals. Minimum working / rotating parts Safe and quite operation levels. Gentte product handling with lower maintenance and downline cost. Dynamically combinations of seal faces as per customer's requirement (single seal / double seal, seal external cooling ) Suitable for standard motor or flange type or foot cam flange type motor or engine Mono bloc or bare pumps or with trolley Also with flame proof motors Various types of connection like - tri'clove joints sms, flanges or threaded nipple/coupling Pumps with adjustable legs, available on request

• Max Flow Rate: 30-50 cube per hour
• Head: max 200mtr
• Brand Name: Malhar
• Type Of End Use: Industrial
• Power Source: Electric, Diesel 
• Model: CHP

  End Suction Pump 60 Hz   LES are single-stage End-suction pump according to ISO 2858. Our range also includes several models of pumps which have been developed with duty condition which are not covered in ISO 2858. The volute casing of End suction pump is designed to be robust in construction to take the undue stresses offered by the pipe work. They have an axial suction port and radial discharge port. Standard flanges are PN 16 as per DIN standard EN 1092-2 and PN 25 as per DIN standard EN 1092-2. ANSI 125 and ANSI 250 as per ASME B16.1 are available on request   APPLICATION   Water Supply. Pressure boosting for high rise buildings, hotels industry etc. Industrial washing & cleaning systems. Fire Protection systems. Cooling & Air Conditioning systems. Boiler feed and condensate transfer system. Irrigation systems for fields including sprinkler & drip irrigation systems FEATURES   The pumps are non self priming horizontal end suction pumps with axial suction port and radial discharge ports. Standard flanges for suction and discharge ports will be PN 16 as per DIN standard EN 1092-2, PN 25 as per DIN standard EN 1092-2, ANSI 125 and ANSI 250 as per ASME B16.1 are available on request. Performance and dimensions comply to ISO 2858. These pumps are close coupled pumps with TEFC squirrel cage induction motors with main dimensions complying to IEC standards. These pumps are available with mechanical shaft seal only. These pumps have the discharge range from 3 to 660 m鲁/hr and head range from 4 to 158 meters. Motor ratings are from 0.37 to 132 kW. The pump impellers are dynamically balanced to grade 6.3 of ISO 1940. These pumps are available with our standard range of motors complying with EFF2 motors. They can also be supplied with EFF1 motors on request.

mud- self priming centrifugal pump is adequate and automatic in nature. Mud- self priming centrifugal pump is easy to maintain and can be easily repaired at a very low rate. Our mud- self priming centrifugal pump is available at reasonable prices. Mud- self priming centrifugal pump can be installed without any hassle, besides; their spare parts are easily available and replaceable. Our mud- self priming centrifugal pump can also work efficiently during voltage fluctuations. advantages easy to installless maintenanceeasily repairable uses pumping out polluted waterhandling water and light chemicalsprocessing dairy products specifications

• Material: Cast Iron
• Voltage: 220-240V
• Brand Name: Lubi
• Head Range: Up to 156 m/15.6 kg/cm 2
• Flow Range: Up to 11000 LPM / 660 m 3 /h
• Temperature Range: -10 to 100 Degree C

Suitable for Contaminated liquids, as well liquids containing air or gas, for sumps, gullies and many other applications where a suction lift is required Features Excellent self-priming ability No non-return valve required in the inlet Single unbalancedbalanced seals to EN 12756 (DIN 24960) Mechanical seal with dry-running protection through oil bath quench Ideal for handling contaminated liquids Easy maintenance – Back-Pull-Out principle Flanges 32 and 40 threaded connection Flange connection 50 and higher to ISO 7005 PN 16 Flange connection to ISO 7005 PN 20 (ANSI B16.5 150 lbs) optional Greased for life roller bearings Magnetic drive optional Atex certification

• Head: up to 45 meters
• Capacity: up to 150 m3/hr
• Size: 25mm to 150mm
• M.O.C.: All C.I., C.I./S.S. ,SS-316 / 304, Bronze etc.

special features excellent quick automatic action without foot valve up to 7 meters. automatic air release during priming. back pull out design, so easy maintenance without disturbing pipelines. dynamically balanced rotating parts ensure less vibrations. better efficiency because of good hydraulic design. minimum parts, fast repairing at low cost, also pump is available at economical rate. available in bare, coupled, mono-block, belt driven & engine driven version. also offered pump with trolley / trailer to move it from one place to another. mono-block pumps can be able to with stand with wide voltage fluctuations. less expensive & easily available spares. pumps can be fitted with mechanical seal as per customer's requirements. very simple construction, only two moving parts. easy inspection of impeller. large diameter solids handled . Up to 60 mm. high resistance. To abrasive liquids the wear plate is easily replaced and impeller are also available with ceramic coating easy to install:- only the suction hose is immersed in the liquid, the pump can be set up high and dry in the most convenient position for inspection and maintenance. easily replaceable wearing parts one or more times to get the original performance. application : go to top public utilities : for pumping muddy water, sewage, polluted liquids, solid and in swimming pool. dewatering basements, trenches, construction sites. onboard shift, as bildge, for desk wash & engine cooling tiles & marble factories, effluent plants. mobile machinery : cooling water for marine engines and shovels. any application where priming is to be avoided. industry : transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension; clean or dirty low viscosity petroleum product or solvents; milk of lime, caustic soda; washing, cooling, circulation; smoke scrubbing; emergency duty. civil engineering : flood drainage; sewage pumping; fire fighting; recovery of dangerous liquids. naval duty : loading and unloading; bilge pumping; washing, fire fighting, stripping, sanitary duty and circulation. waste treatment : pumping polluted, hot or corrosive waster water containing sand, mud or solids in suspension; dosing neutralising liquids; pumping out settled sludge. construction industry : dewatering excavation, canals or ponds; ground water dewatering with well point system or drains; water supply from wells or canals; hosing down concrete castings.

The Self Priming Monoblock Pump, we offer, is suitable for wide voltage operation ranging from 160 to 240v V. Our Self Priming Monoblock Pump features brass forged impeller and high quality mechanical seal double shielded ball bearings. There is no need of additional lubrication tefc capacitor start and run type motor. Our Self Priming Monoblock Pump comes with high quality enameled copper wire fitted with T.O.P (thermal overload protector) for safety of motor self-priming up to 30ft of suction lift.  Our Self Priming Monoblock Pump finds applications in residential bungalows, apartments, gardening and small plants solar heater systems, lawn sprinklers, small farms car washing, booster applications etc. Features : Suitable for wide voltage operation - 160 to 240 V Brass Forged Impeller High quality mechanical seal Double Shielded Ball Bearings – No need of Additional lubrication TEFC Capacitor start and run type Motor and no need of centrifugal switch High Quality Enameled Copper Wire Fitted with T.O.P (Thermal Overload Protector) for safety of Motor Self priming upto 30ft of Suction Lift Pump Light weight for easy handling Compact design Applications : Residential Bungalows, Apartments Gardening and Small Plants Solar Heater Systems, Lawn Sprinklers, Small farms Car washing, Booster applications Small Fountains  

LUBI Self Priming Monoblock Pump THUNDER-II is Self Priming, Horizontal, Single Stage Monoblock Pump. Its motor winding is vacuum impregnated along with synthetic varnish that offers impressive resistance. With the help of aluminum extruded motor body, there is impressive corrosion resistant and heat dissipation. The pump is fitted with TOP (Thermal Overload Protector) and premium mechanical seal offers longevity. Lightweight and compact size offers easy installation. Forged Brass Impeller is used to give trouble free service. Motor winding are vacuum impregnated with synthetic varnish for better moisture resistance. Superior Mechanical Seal for longer life and effective sealing against water leakage. Aluminium Extruded Motor Body for better heat dissipation and Corrosion resistant. Double Shielded pre-lubricated anti-friction ball bearings are fitted at both ends to withstand radial and axial loads.

• Head: Up to 150 m
• Pressure: Up to 15 kg / cm2
• Capacity: Up to 2200 m3/hr
• Discharge Size: 25 mm to 300 mm
• Temperature: 350 Deg C
• Speed: Up to 3500 rpm
• Minimum Order Quantity: 1 Piece

• Motor Phase: Single Phase
• Power Source: Electric
• Frequency: 50 Hz

• Power: 1 HP TO 4 HP
• Color: Blue
• Material: Plastic
• Pressure: 1.6 KG
• Country of Origin: Made in India
• Brand: algo
• Model Name/Number: simpo
• Flow Rate: 250 LPM
• Usage/Application: Pool Heating
• Power Source: Electric
• Voltage: 230V TO 380V
• Phase: 1 PHASE & 3 PHASE
• Connection Size: 70X70
• Flow Range: 250 LPM
• Head Size: 70MM
• Speed: 2900 RPM
• Solid Size: 70MM
• Motor Power: 1 HP TO 4 HP

• Application: Industrial
• Weight: 10-20kg
• Voltage: 220V
• Pressure: Medium Pressure
• Warranty: 1year
• Certifications: CE Certified

Features : Long working life Easy to install Robust design

• Flow Rate: Upto 30 m3/hr
• Max Head: Upto 20 Meter
• Max Working Temperature: Upto 50 Degree C
• Max Working Pressure: 0.3 MPA (3 Kg/cm2)

Key Features  Auto-draining for centrifugal pump Tailored impeller for impeccable flow and agitation Quick demount (QD) feature to enable quick changeover

self priming centrifugal pumps provide customized solutions with speed, quality and cost effective product range.

• Model Name/Number: SH/SCM Series
• Usage/Application: Industrial
• Pump Type: Pressure Booster
• Brand: Shakti Pump
• Motor Horsepower: 0.5hp - 5hp
• Product Type: Booster Pump
• Discharge Pressure: 1 - 233Lpm
• Flow: 14m3/hr
• Power Source: Electric

• Head: 3 to 76 meters
• Capacity: up to 1890 LPM
• Size: 12 mm to 100 mm

Horizontal Centrifugal Close / Semi- Open/ Open type Impeller Design Minimum working / rotating parts Safe and quite operation levels. Suitable for standard motor or flange type or foot cam flange type motor Monobloc or bare pumps Also with flame proof motors Economic, Efficient & Easy in Maintenance MOC : SS-304/SS-316/SS-316 L Seal: Mechanical Seal Application:-   Ideal for handling of Water, DM/DI Water, Mineral Water, Hot Water, Pharmaceuticals Liquid Drugs & Syrups, Milk, Butter Milk, Soft Drink, Beverages, Solvents, Acids, Alkalis, Light Petroleum products etc. Acid and Light Chemicals Colour Dyes and Pigments Booster Application Water Treatment Plants, RO Plants

• Material: Mild Steel
• Motor Phase: Single Phase
• Brand: Vishava
• Power Source: Electric
• Frequency: 50 Hz
• Voltage: 220 V
• Motor Horsepower: 0.5 HP

• Country of Origin: Made in India
• Usage/Application: Industrial
• Material: Cast Iron
• Power Source: Electric
• Motor Phase: Single Phase
• Frequency: 50 Hz

• Pressure: High Pressure
• Power Source: Electric
• Motor: 0.5 HP
• Phase: Single