Magnetic Separators Dealers in Ahmedabad

• Specialities: Rust Proof, Long Life, High Performance, Easy To Operate
• Type: Overband Magnetic Separator
• Country of Origin: India
• Condition: New

We have a newly added magnetic separation system for high-moisture non-magnetic sand material which is used to reduce the free iron content from the sand automatically. This magnetic separation system is a combination of an overband magnetic separator and a magnetic drum pulley. It also has a vibratory feeder that distributes and feeds the material to the overband magnetic separator. Salient Features: ·       Low Maintenance·       High-Strength Magnet·       Precious Separation·       Advanced Design  

• Voltage: 110V, 220V, 380V, 440V
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Power: 1-3kw, 3-6kw
• Driven Type: Electric, Hydraulic, Pneumatic
• Weight: 100-200kg, 200-300kg, 300-400kg, 400-500kg, 500-600kg, 600-700kg, 700-800kg, 800-900kg
• Color: Black, Blue, Brown, Grey, Light Green, Light White

Salient Features Used in either ceramic or powerful rare earth magnet. Separator body covering. Low maintenance Roughest construction High efficiency of separation Long belt life How Does it Work?Magnetic Separation Process: The Suspended Permanent Magnet is placed over the conveying belts carrying the material. This Suspended Magnet system arrests Ferromagnetic materials from distance of 300mm/12 inches from feed material which is transported through the production process.NOTE The attraction distance trial is taken at a point below the geometrical center point of the suspended magnet assembly. The above results are obtained when free path is available for tramp iron particle. The above chart is given for the reference. One may get a deviation of 1 to 2 inches in attraction distance depending on actual conditions. Construction Two U-section pieces are fixed on the Magnet by fastening ears and are supporting bearings of Drums. Drums are equipped with shafts mounted on removable hubs. All bearings equipped with stakes for tightening the belt. The belt is driven by a Reduction Gear Coupled to Electric Motor / Geared Motor by V-belts. Magnet UnitThe Magnet is made of High-Intensity Strontium Ferrite / Rare Earth Magnets and is guaranteed for the Magnetic Power throughout the life of the installation. A Non – Magnetic Stainless steel Plate is provided to cover the poles of Magnet. There is no need for any electrical supply or maintenance.

With the help of our technically proficient employees, we have been able to manufacture and supply best quality Industrial Hopper Magnet. It is made using high coercive permanent magnets that are sealed in non-magnetic tubes at our state-of-the-art manufacturing premises. In the production process of these industrial tools, we use best quality magnets and other raw material such as stainless steel that is procured only from reputed vendors of this industry. Our rich domain expertise and team of dedicated professionals assist us in meeting bulk as well as urgent requirements of Industrial Hopper Magnet. Feature: Corrosion resistance High coercive force Chemical resistance

• Capacity: 50, 100, 150, & 200 Liters/Min
• Condition: New
• Separated substance: Liquid coolant
• Application domain: For grinding processes
• Surface material: Metal
• Performance: Optimum

We have brilliant logistics network owing to which safe and timely deliveries are guaranteed with us. Following the strict packaging guidelines, we make sure that the range of products we offer are packed sternly to evade loss/damage. By this, we ensure that the products are in safe condition during handling, warehousing and transportation.

• Application: Industrial
• Weight: 100-200kg
• Voltage: 220V
• Driven Type: Mechanical
• Warranty: 1year

The dry magnetic separator is commonly used iron ore and manganese ore beneficiation equipment. It is the mainstream strong magnet separator, which is specialized in processing dry magnetic minerals. The wet type dmagnetic separator use liquid diluents to improve separation efficiency. The dry magnetic separator requires that the material must be dry, and can move freely between the particles. Or it will affect the separation result, and even cannot separate materials. The magnetic system of dry magnetic separator adopts high quality ferrite or using the composite material by rare earth and magnetic steel.   According to the requirements of users, we can offer downstream, semi-countercurrent and countercurrent and other types of magnetic separators. The advantages of this magnetic separator are: simple structure, large capacity, easy to operate and easy to maintain

• Country of Origin: India
• Size: 8 to 13 inch
• Type: Hopper Magnet
• Material: stainless steel
• Diameter: 8 to 13 inch
• Shape: Round Shape
• Thickness: 0-10mm
• Certification: ISO 9001:2008 Certified
• Application: Industrial Use
• Grade: s.s 202
• Color: Metallic
• Feature: Prefect Finished
• Surface Finishing: Polished
• Brand Name: hopper magnets
• Composite: magnet
• Product: hopper magnet

• Country of Origin: Made in India
• Brand Name: Delite
• Magnet Grade: N35, N38, N40
• Material: Stainless Steel
• Shape: Round
• Packaging Type: Box
• Surface Treatment: Polished

• Brand Name: 8 INCH HOPPER MAGNET
• Material: Earth Metals
• Surface Finishing: Polished
• Shape: Round Shape
• Color: Silver
• Application: Industrial Use
• Size: 140/70/20, NO
• Certification: NO
• Feature: Durable, High Coercivity
• Diameter: 150-200mm
• Thickness: 10-20mm
• Country of Origin: India

Provide an efficient magnetic filtering to any hopper against iron contamination such as nuts, nails and pins etc. Available in round square / rectangle shapes. We offer meticulously designed square shaped hopper magnet that are exclusively used by the plastic industry. These hopper magnets protect the molding machinery and other processing equipment from damaging ferrous metal.  

• Weight: 100-1000kg
• Color: Light Green
• Voltage: 110V
• Automatic Grade: Automatic
• Warranty: 1year
• Type: Magnetic Drum Separator
• Application: Cement Particles, Chemicals, Mineral, Removing Plastics
• Power: 1-3kw

Magnetic Drum Separator is provided by us with a modernized infrastructure to assure fewer complications in processing and producing. We are manufacturers and exporters from Ahmedabad, Gujarat offering this particular product for removing iron particles from various materials. Basic materials are utilized with ultra-modern technique by the proficient trained professionals. Magnetic drum separator is highly reliable with easy operation and low maintenance cost.   Features : User-friendly operation Low maintenance Long working life Sample Availability : Yes Brand : Mix Well Supplier Product Code : HE / 015

Amongst the oldest comparison measuring tools these are designed for taking comparative measurements & transferring the dimensions to a Micrometer, Vernier Calliper, precision ruleDividers are used for marking out circles on steel or transferring measurements from master templatesManufactured from high grade steel. Calipers & dividers have a spring joint for precision settings. Adjustments are made by opening & closing of legs via an adjusting nutDivider points are hardened 50-55 HRC for increased wear resistance

• Type: Material Separator
• Brand Name: Laxmi Group
• Condition: Good
• Place of Origin: Ahmedabad,Gujrat
• Feature: Innovative design, peerless performance and promising life.
• Min. Order Quantity: As per client requiremen

We bring to afore the Material Separators, which are highly praised for their innovative design, peerless performance and promising life. Also, our dexterous team puts painstaking efforts to construct the Material Separators that are user-friendly and require low upkeep. Besides that, these Material Separators are procurable from us at the feasible rates. We are the renowned Material Separator Manufacturer, Supplier and Exporter in India and overseas. More About Material Separator: Material Separator is used where a combination of material transport and separation of fine dust from basis material is required. The material separator can be built into pneumatic transport systems, where pressure-less out-feeding of the basis material for press, container or silo is required. The material separator is made of strong steel plate. The separator consists of a rotary valve and a coarse filter in perforated plate built into the wall of the valve housing. The rotor is mounted with special rubber packing's securing an air-tight valve for pressure-less out-feeding. The transport air passes through the coarse filter, which can be connected to an air filter.

• Brand Name: EVEREST MAGNETICS
• Shape: Round
• Color: SIlver
• Application: Plastic Indusrty, agro Industry , Pharma industry , engineering , machines much more
• Type: Magnetic Equipment
• Country of Origin: India
• Material Property: High grade Magnet
• Condition: New
• Automation Grade: Fully Automatic
• Warranty: 5 Years

• Specialities: Safeguards machines such as Belt conveyor, Polygonal Siever, Sand Coolers to remove ferrous particles and purify the end product.This Over band Magnetic Separators is used for automatic removal of ferrous contamination.Permanent magnet ensures the perfect

• easily clean up sharp edged drill chips screw and other metal parts • items are safety ejected by pulling the back side knob • ideal for hard to each space • used in all fabrication shop and machine shop • no requirement of hand contact with scrap to handle, so safe in use sr.no cat no. Size (mm) 1. Ul - 81301 ø1 x 6 inch

• Filter Media: SS304, SS 316L, Hastelloy
• Gauss Power: 5500,6500,9000, 10000 &up to 13000 Gauss
• Outer Diameter: 25 , 32 , 40 , 50 mm OD
• Length: 10” , 20” , 30” , 40” & Customized

Magnetic filters are installed along the passage of fluid. The flowing liquid is passed through magnetic field of high intensity filter magnets where fine ferrous particles get arrested in a magnetic trap.   These arrested fine iron particles can be removed manually after removing the top lid of the filter. Drain plug is provided at the bottom of Filter unit for periodical cleaning of the filter system.   The Magnet rods are enclosed in stainless steel housing making it suitable for use in Chemical, Paper & Ceramic Industry. TheMagnetic Filter is easily removable from the stainless-steel enclosure by loosening a few quick releasefasteners.   Features & Benefits High-intensity magnets remove virtually all particles and clean fluid continues uninterrupted. Rust particles are removed from the magnet and can be recycled with minimal fluid loss. Magnetic design means that the filter will not block, so there is no blinding or pressure build up. Cleaner, Longer Lasting Fluids& Minimum Fluid Loss. Reduced Expenditure on Consumable Filters. Reduced Waste Disposal with Continuous 24/7 operation. Fluid protection&rapid return on Investment.   Application Compressed Air, Gases. Water filter, Process fluids, Chemical, Fuel, Oil, Solvents etc. Automotive Manufacturing Industries Magnetic Separation in food, Chemical, Pharmaceuticals, Sugar industries,Paper,Textile.

• Brand Name: M B
• Shape: SQUARE
• Material: SS
• Color: SILVER
• Size: 8\" , 10\" X 12\" X 14\" X 16\"
• Country of Origin: Made in India
• Item Code: 84198900

• Feature: Precision engineered,High-end process,Long service life
• Material: Stainless Steel
• Brand Name: Excel Magnetics
• Application: Industrial
• Magnet Grade: N42
• Surface Finish: Chrome Coated
• Minimum Order Quantity: 1 Piece

Magnetic Drum Separator available from 200 Kg. per Hour to 20 Ton per Hour capacity.

The permanent Magnetic Drum consists of stationery permanent Magnetic assembly having uniform and everlasting Magnetic field across the entire width of the drum, which is effective over approximately half the drum circumferences as shown in fig Drum shell made of non magnetic stainless steel revolves around the magnetic filed. As the material fed evenly from the chute falls over the drum ,powerful magnetic, field attract & holds ferrous particles to the revolving shell. As the revolving shell carries the iron particles through the stationery magnetic field, the non magnetic material falls freely from the shell while ferrous particles are firmly held until carried beyond divider and out of magnetic field The strength of the permanent magnetic drum is guaranteed to be greater than corresponding electromagnetic Drum .The permanent magnets used are everlasting magnets and its strength does not diminish during normal use and can be used through out the life of the installation. Size Range: The Permanent Drum Separators are available in standard drum diameters of 300 mm. 400 mm, 450 mm, 500 mm, 600 mm, 800 mm Drum width range from 300 mm to 1500 mm. Other sizes can be made as special to your requirement. the larger the diameter and width of the drum the greater is the volume of material which can be handled Magnetic Materials : Magnetic separators are offered with two different type of magnets: Ferrite Magnet : The magnetic separator with ceramic magnet are useful for the application where free and larger iron particles are to be separated. The average magnetic intensity on the magnetic drum surface will be 1500-2000 Gauss. Rare Earth Magnet : The magnetic separator with high intensity Rare Earth Nd-Fe-B (Neodymium- Iron- Boron) magnets are useful for removing magnetic contamination with low magnetic properties and fine iron particles are to be separated. The average magnetic intensity on the drum surface will be 3500 - 5500 Gauss. 

Double Drum Type Permanant Magnetic Separator :Specification : With reduction gear, l HP 3 Phase Electric Motor to drive the drum at a speed of 15 RPM, Vibrating Tray fixed in between Hopper and Drum extra high power permanant  magnetic plate at bottom side & Machine complete with close body. Special modifications can be made as per requirement of the customer.

Safely and automatically remove tramp iron from heavy product flows. O.B.M.S. are used for resource recovery, reclaiming steel for resale and separating ferrous contaminants from other recyclabel material such as aluminium, glass, plastic, tires, crushed concrete and wood. Many facilities use O.B.M.S. to protect machinery, such as crushers at quarries, cement plants, and mines. At power plants, they keep tramp metal out of coal pulverizers, Pulp & Paper mills use them on wood chips. In Foundries, they remove chills, spruces and gaggers from sand.     Features : Permanent Magnet- No power required Easy installation and maintained Four rigid lift lugs for easy suspension Installation across the conveyor belt or over the discharge head pulley Most effective for removal of tramp iron from Materials carried over conveyors. Robust industrial design Manufactured to Customer specification No Electrical Maintenance On Magnet Dust and rain protection

Moduling Machines against iron contamination such as Nuts, Nails, Iron Bits etc. and ensure the trouble free and smooth operation of the machine. Four standard sizes both in Round and square are available and can be selected on the basis of the size and shape of Hoppers. High power Magnetic Rods are provided which prevents any iron material to enter in to the Machine. Special size Hopper Magnets are also supplied. Most useful for Plastic, rice Mill, Flour Mills, Cattle feed & Guar Gum industries. Available in S.S. 304316 construction also for Dyes & Chemical Industries.

Our newly design pneumatically operated magnetic trapfilter is most advanced magnetic trapfilter to achieve optimum performance, reliability and longevity. Particles are separated from a highly corrosive chemical using strong magnetic gradient. It means the higher the magnetic gradient the stronger the attracting magnetic force act on the particles.

We are offering hopper magnet. Fabricated in stainless steel, the hopper magnet protects plastic extruders and molding machine against iron contamination such as nails, nuts, iron bits, so on and so forth. The hopper magnets are available in various shapes, circular, square or rectangular to match the size and shape of the hopper precession.

Our organization is counted among the most trustworthy names involved in providing a wide range of Lifting Magnet. These magnets are made using sophisticated machines and technologies, ensuring that we maintain the set industrial norms. Lifting Magnets with cover is the most handy, efficient and economical device to separate iron contamination from foundry scarp sand & plastic granules. Made from high connectivity permanent magnets most useful for foundry plastic industries & scarp dealers. Type J566-LM/WC is the most Handy, efficient and Economical device to separate iron Contamination from Foundry scrap sand & Plastic granules. Made from High Coercively permanent magnets. Most useful for foundry, Plastic Industry & Scrap dealers. Size of the magnetic plate is 140mm (W) X 170 mm (L) X 25 mm height. Non magnetic stainless steel bumping plate facilitates to remove iron from the magnet which is collected from scrap or any other material. Features : Easy to operate Durability Smooth functioning High efficiency Superior functionality Robust construction

Hump Magnet is an in-line magnet for extracting ferrous metals from pneumatic conveyor systems. Each Hump Magnet contains two powerful magnetic plates positioned at right angles at each other. Hump Magnet attracts any ferrous particles that may pass through the material flow system, thus ensuring the material is free from any metal or ferrous contamination. Installation of these Hump Magnets has resulted in ensuring the purity of the material. Hump Magnets are widely preferred in cotton mill blow room section line.