Mahendra Ashram Road, Ahmedabad, Gujarat

AMTECH offers Investment Casting SS 304(CF 8) and SS 316(Cf8M) strainers for all industrial and domestic filter applications. Body of strainer is one pc design casting, strainer element is SS 304 or SS 316 with suitable mesh strainer element. End connections as per customer requirements like Bsp-F, Npt-F end.   Specification  

AMTECH offers Stainless steel -Y type Strainer -150# and 300# in SS 304/SS 316/SS 304L/SS 316L/Hastalloy/Dulex /Gun Metal/Brass/Any special graded Casting- Y type strainers for all industrial and water lines filter applications. Body of strainer is one pc design casting ,strainer element is SS 304 or SS 316 or any suitable material and mesh size. We also provide double strainer element for fine filtrations. We have other filters like conical strainer and basket strainers etc. We can fabricate any special filter as per Drawing.We have Y strainer Sizes range from 1/2" to 12" in flanged end connections.   Specification  

AMTECH-WEIR-A TYPE DIAPGRAGM VALVE SCREW END has Body material is CI,CS,SS 304,SS 316,SS304L ,SS316L , threaded valves are Unlined. The sizes of Valves are 1/2" to 4" , all valves are pressure rating PN 10, PN 16 etc.   Specification

AMTECH unlined Diaphragm (also called membrane) valve is recommended for application solvents,chemicals, corrosive fluids etc. This valves provide tight shut off , primarily designed for on-off services. The Body material is CI,CS,SS 304,SS 316,SS304L ,SS316L and valves are unlined are manufacture by us.The sizes of Valves are 1/2" to 10".   Specification    

AMTECH inside Rubber lined Diaphragm (also called membrane ) valve is recommended for application involving slurries, fluids with suspended solids, corrosive fluids etc. This valves provide tight shut off , primarily designed for on-off services. The Body material is CI, ,Sg iron ,CS Lined and Unlined both types are manufacture by us. The Lined Diaphragm Valves are lined with Natural Rubber,Ebonite Rubber,Neoprene, Hypalon and customized rubber etc. we can do the Lining of other materials as per customer requirements. There are two types of diaphragm valves: first one type seals over a "weir" (saddle) and the other (also called a "straight-way" valve) seals over a seat.The saddle-type valve has its two ports in line with each other on the opposite sides of the valve, whereas the seat-type has the in/out ports located at a 90 degree angle from one another. The saddle type is the most common in process applications and the seat-type is more commonly used as a tank bottom valve.   Specification

AMTECH™ Wafer type non return valves are suitable to mount between two flanges of 150#,300#,Table-D,E or as per customer requests.Theses valves are easy install it.Also cost is very economy compare to other valves. The disc will open in the pipe dia. The back pressure of oil, gas, water, or steam can be withstand with soft seats like Neprene,Ptfe ,Silicon or Viton rings.Any materials valves can be manufactures for all applications.The body material is CI,CS,SS 304,SS 316,Bronze,SS 304L,SS316L,Aluminium etc.   Specification    

Amtech wafer design lug type Gear operated- butterfly valve with lever operated and soft seated seat in nbr /nitrile/silicon/viton/ptfe or any other type as per customer requirements.  We manufacture valves from genuine guaranteed raw material with material test certificate, hydraulic test certificates , Mill TC 3.1.b available with all supply. Also , we can provide valves with third party inspection agencies.   Specification

AMTECH offers Butterfly valves suitable for simple as well as highly complex ones. Our Butterfly valves are rubber lined, PTFE lined, metal to metal sealing and high performance duty. AMTECH Butterfly valves are suitable as either open/closed or rare application in regulating valves. They are available in a wide variety of sizes, materials and models. Butterfly valves can be operated with various controls actions like electric / pneu,atic actuator options. Our Butterfly valves are widely used in water, process industries and marine for chemical and corrosive duties. We offers a range of valves with specially designed for pharmaceuticals, foods & beverages, starch industries, metal and minerals industries. We manufacture valves from genuine guaranteed raw material with material test certificate, hydraulic test certificates , Mill TC 3.1.b available with all supply. Also , we can provide valves with third party inspection agencies.   Specification

AMTECH Two Way Control Valve is a rigid and comparatively compact type , which is designed to work very accurately various media like control water, oils, steam, and other industrial fluids. Two way valve package is accurately perfect and suited to address the space limitations of the the OEM industry.Two Way control valve is durable , very reliable, and easy to select. The internal valve trims are mfg and designed in SS 410/SS 304/SS 316 to ensure long service life to avoid maintenance cost. We have two way control valve may be used for both converting and diverting applications. Amtech Three Way always meet the both DIN and ASME standards. We have also positioner controller for valve actuation. Accessories : Electro Pneumatic Valve Positioner Modulating Controller: 4-20mA PID Controller (Available on Request)   Specification

AMTECH offers two piece Design ball valve in Full Port/Reduce port design with Flanged end connections, ball valves has split body design which meets all the requirements of ASME B16.34 for Class 150 /class 300 ball valves. The Blow-Out Proof Stem floating Ball Design precision engineered valves have machined solid stainless steel ball and hollow ball with relief hole in the stem slot prevents build-up of cavity pressure while the valve is in the open position. We manufacture valves from genuine guaranteed raw material with material test certificate , hydraulic test certificates , Mill TC 3.1.b available with all supply. Also , we can provide valves with third party inspection agencies.   Specification

AMTECH THREE Way Control Valve is a rigid and comparatively compact type , which is designed to work very accurately various media like control water, oils, steam, and other industrial fluids. Three way valve package is accurately perfect and suited to address the space limitations of the the OEM industry.Three Way control valve is durable , very reliable, and easy to select. The internal valve trims are mfg and designed in SS 304/SS 316 to ensure long service life to avoid maintenance cost. We have three way control valve may be used for both converting and diverting applications. Amtech Three Way always meet the both EN and ASME standards. The valve is operated with pneumatic diaphragm operated ,as well as we have design for electric operated. Also ,We can provide position controller. 3 way Diaphragm operated Pneumatic Control Valve for Mixing/Diverting Duty. Accessories : Electro Pneumatic Valve Positioner Modulating Controller: 4-20mA PID Controller (Available on Request)   Specification

AMTECH Three piece design Ball valves can be operated by the actuator, on off type, with limit switch / with solenoid valves as per customer requirements. Valves are available made from bar stocks sand casted , investment casting in various materials, likes SS 304,SS 304L ,SS 316 ,SS 316L , IC CF8,IC CF8M,IC CF3, ICCF3M .AMTECH SINGLE PC design are regular exporting valves to Europe, America ,Asia and Gulf Countries .Sizes -1/4" to 6"(6 NB TO 150 NB). We manufacture valves from genuine guaranteed raw material with material test certificate , hydraulic test certificates , Mill TC 3.1.b available with all supply. Also , we can provide valves with third party inspection agencies.   Specification

AMTECH Three piece design Ball valves are the very easy mounting and easy maintenance online off line with change of seat and seal in every conceivable application. They are available made from bar stocks sand casted , investment casting in various materials, likes SS 304,SS 304L ,SS 316 ,SS 316L , IC CF8,IC CF8M,IC CF3, ICCF3M .AMTECH SINGLE PC design are regular exporting valves to Europe, America ,Asia and Gulf Countries .Sizes -1/4" to 6"(6 NB TO 150 NB). We manufacture valves from genuine guaranteed raw material with material test certificate , hydraulic test certificates , Mill TC 3.1.b available with all supply. Also , we can provide valves with third party inspection agencies.   Specification

AMTECH TWO piece design Ball valves can be operated by the actuator, on off type, with limit switch / with solenoid valves as per customer requirements. Valves are available made from bar stocks sand casted , investment casting in various materials, likes SS 304,SS 304L ,SS 316 ,SS 316L , IC CF8,IC CF8M,IC CF3, ICCF3M .AMTECH SINGLE PC design are regular exporting valves to Europe, America ,Asia and Gulf Countries .Sizes -1/4" to 6"(6 NB TO 150 NB). We manufacture valves from genuine guaranteed raw material with material test certificate , hydraulic test certificates , Mill TC 3.1.b available with all supply. Also , we can provide valves with third party inspection agencies.   Specification

AMTECH Tee/ "T" strainers designed to remove foreign particles from pipeline in process industry. Tee Type Strainers had a economy compare to basket / pot/bucket strainer to large nominal bore diameter has straining area . This strainer can be mounted into vertical or horizontal piping and can be configured for right-angled applications. Tee strainers are supplied with fine to coarse or vice-versa filtrations to ensure that the system is running at the required cleanliness level in full load operation. Tee strainers are features either bolted cover or quick opening covers for application suitability. Tee strainers are used where a compact accessible strainers is needed for protection of pumps, valves and similar equipment.   Specification  

AMTECH™ Non return valves suitable for oil, gas, water, refining, steam and chemical applications. Non return valves are available in casted, fabricated or forged body. A wide range of check valve models with a variety applications is available.We have swing type check valve and Lift up type check valve.Swing design is 150#,300#,600#.Lift up design is as per DIN standard.Sizes : 50 mm to 600 mm.   Specification  

AMTECH offers straight-through configuration handling viscous fluids, thick slurries, and fluids containing solids. KB/ straight through diaphragm valve has flow facilitates line clearing. The spindle has long movements and so diaphragm life will be small compare to weir A type , so it will increase the maintenance of diaphragm. It require flexible diaphragm hence diaphragm material choice is limited to elastomers and very important. These valves are lined or unlined.   Specification  

AMTECH OFFER SS THREE PIECE BALL VALVES can be operated with electric actuator – 230 V ac/ 24 V dc , single phase/ three phase electric current. The electric operated valves can be praposnate control as well as on off type.These valves are quickly and simply be fitted with electric drive. The wide range includes the right ball valve for just about every conceivable application. They are available in various materials, like CS, SS, Gun Metal, Aluminum etc. MATERIAL OF CONSTRUCTIONS : AISI 304 (CF 8), AISI-316(CF 8 M), AISI 316 L (A 351 CF 3 & CF3M ) ,LCB, WC 9,WC 6 ,Hast Alloy, Gun Metal, Brass, Aluminum, Aluminum Bronze.OPERATION: Manually Handle operated, Gear operated, Pneumatic Actuator operated, Motorised Actuator operated. We manufacture valves from genuine guaranteed raw material with material test certificate , hydraulic test certificates , Mill TC 3.1.b available with all supply. Also , we can provide valves with third party inspection agencies.   Specification

AMTECH SS THREE PIECE BALL VALVES can quickly and simply be fitted with a pneumatic, electric or hydraulic drive, even when they are operating. The wide range includes the right ball valve for just about every conceivable application. They are available in various materials, like CS, SS, Gun Metal, Aluminum etc. MATERIAL OF CONSTRUCTIONS : AISI 304 (CF 8), AISI-316(CF 8 M), AISI 316 L (A 351 CF 3 & CF3M ) ,LCB, WC 9,WC 6 ,Hast Alloy, Gun Metal, Brass, Aluminum, Aluminum Bronze.OPERATION: Manually Handle operated, Gear operated, Pneumatic Actuator operated, Motorised Actuator operated. We manufacture valves from genuine guaranteed raw material with material test certificate , hydraulic test certificates , Mill TC 3.1.b available with all supply. Also , we can provide valves with third party inspection agencies.   Specification

AMTECH OFFERS SS PLUG VALVE FLANGED END in Design Standard : BS 5158 , n design with Regular Pattern two way - Screwed & Flanged Ends and HIGHER CLASS IN -Forged body plug valve. AMTECH™ Plug valves are designed and manufacturers s per standard norms and variety of materials.CS body, SS 304, SS 316 ,SS 304 L , SS 316L -body valves have end connections as per customer requirements.   Specification  

AMTECH valves offer the sight glass in single window and Double Window design.The glasses are made from Borosilicate toughend glass.To view the flow online in line.   Specification

AMTECH Single piece design Ball valves are the right ball valve for just about every conceivable application. They are available made from bar stocks sand casted , investment casting in various materials, likes SS 304,SS 304L ,SS 316 ,SS 316L , IC CF8,IC CF8M,IC CF3, ICCF3M .AMTECH SINGLE PC design are regular exporting valves to Europe, America ,Asia and Gulf Countries .Sizes -1/4" to 4"(6 NB TO 100 NB). We manufacture valves from genuine guaranteed raw material with material test certificate , hydraulic test certificates , Mill TC 3.1.b available with all supply. Also , we can provide valves with third party inspection agencies.   Specification