Marine Equipment Dealers in Dariapur, Ahmedabad

• Material: Aluminium Alloy
• Features: Corrosion resistant,Excellent navigating property,Durable,Pocket-friendly
• Lighting Color: Cool Day Light
• Lux level: At 1 Meter 32 Lux
• Long life LED: 1,00,000 Hours (12Hr/Day = 22 Yrs )
• Input Voltage: 180 - 280V AC or 40 - 58V DC
• Frequency: 50 - 60 Hz
• Power consumption: 7 W
• Led Number: 720
• Operating temperature: -100 to 600 Degree C
• Glass Material: Polycarbonate

• IP Rating: IP- 65
• Features: Conserves energy , Offers high-degree illumination , Efficient and durable , High performing ability , Budget-friendly price.
• Usage: Car
• Material: Aluminium Alloy
• Lighting Color: Cool Day Light
• Glass Material: Polycarbonate
• Lux level: At 1 Meter 32 Lux
• Long life LED: 1,00,000 Hours (12Hr/Day = 22 Yrs )
• Input Voltage: 180 - 280V AC or 40 - 58V DC
• Frequency: 50/60 Hz
• Power consumption: 5.8 W
• Led Number: 60 Nos are used in 12 circuit parallel
• Operating temperature: -100 to 600 Degree C
• Weight: 1680 gms

Flanged Type Gun Metal / S.S. 304 Globe Valve  

Feature 1.Bigger area exists on the top of the rubber fender and the inferface has smaller pressure 2.Used in over 10,000 tons class dock with the properties of high energy absorption and low reaction force; Steel mounting plates at the fender bottom and open legs make it easy to install fenders at any berthing facility. 3.The straddle between the two knightheadscan be adjusted and the compressive deflection is up to 52.5% 4.That the surface of anti-collision borard if made up of HDPE Plate or Nylon Plate accounts for small attrition quotiety. 5.Can be installed verticallu or horizontally, No need supporting chain

Designed for high-pressure and high-temperature applications for a wide range of fluids excepts slurries and viscous fluids.

• Manufacturing Standard: BS 1873
• Testing & Inspection Std: API 598
• End Connection: Flanged ends as per ANSI B 16.5 & 26” and above ANSI B 16.47 Series A & B
• Butt Weld Ends: As per ANSI B 16.25
• Shell wall Thickness: ANSI B 16.34

Special Features   With Gear Operation if the Torque Exceeds 350N With limit Switch Arrangements for open & Close Position With Electrical Actuator With Stelliting With IBR Certification With Nace MR 0175 With Position Indicators With Locking Arrangement     Design & Testing Standard

MANUFACTURING STANDARDS : BS-1873 FACE TO FACE AS PER ANSI B 16.10 ENDS : FLANGED END AS PER ANSI B 16.5 R.F & BUTTWELD AS PER ASME B 16.25 TESTED AS PER BS 6755 AVAILABLE WITH HAND WHEEL & GEAR OPERATED SIZES AVAILABLE FROM 15mm TO 600mm

• Pressure Rating: 300 class

Pressure Reducing Valve s economically priced. Special features range from a streamlined body that minimizes turbulence and pressure drop to erosion-resistant, hardened stainless steel trim.To avoid replacing the valve body with another of a different size when a future increase in the flow is expected in relation to that at the start of operation.

• Size: Dn 50 - Dn 400
• Material: Cast Iron
• Connection Type: Flanges
• Media Type: Water
• Working Temperature: -20
• Surface Finishing: Color Coated
• Application: Industrial

The Globe Valve offered by us are meticulously designed and provided with threaded replaceable seat having full flow area ensures smooth flow and reduces pressure drop across the valve to minimum. Weld deposited seat, high temperature packing material are provided for superheated steam and high temperature oil &fluids, to ensure trouble free service and longer life. A properly machined and lapped backseat facilitates replacement of gland packing when valve is in full stream. The Globe Valves are available with On-Off disc, control disc and parabolic disc designs. Though normal production restricts up to 400 NB, tailor-made globe valves in larger sizes, higher-pressure ratings, and special material of construction are also entertained.

We are offering pressure reducing valve. Technical specification fluid media all gases and liquids compatible with materials of construction max. Rated inlet pressure 5000 psig outlet pressure range; 50-1500 psig design proof pressure 7000 psig design burst pressure 8000 psig materials body, s.s. 304s.s. 316 all adjustable trims s.s. & 17-4 ph

WE ARE LARJEST SUPPLIERS OF INDUSTRIAL ALL TYPE OF ANCHOR FASTENERS.Offering you a complete choice of products which include Anchor Fasteners.    

• Type: Vacuum Pumps
• Application: Industrial
• Overall Weight: 10-20kg, 20-300kg, 30-40kg, 40-50kg
• Is It Variable Speed: New, Used
• Operating Type: Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Warranty: 1year, 2years
• Driven Type: Electric

Design NU-TECH cast steel globe valves are designed and manufactured to provide maximum service life and dependability. All gate valves are full ported and meet the design requirements of American Petroleum Institute standard API600 & 6D BS EN 13709 and generally, Conform to American Society of Mechanical Engineers standard ASME B1634. Valves are available in a complete range of body/bonnet materials and trims.   Available Modifications For NU-Tech Cast Globe Valves Trim Changes End Connection Modifications Packing and Gasket Change Operator Mounting Handwheel Extensions Pressure Equalizing By-Pass Customer Specified Coatings Weld End Bore Changes Oxygen & Chlorine Clearing & Packaging   Operation Large hand wheels for easy operation. also available with gearing motor actuators, pneumatic or hydraulic actuators for more difficult services.   Live Load Packing In services requiring frequent cycling or with high pressure/temperature variations, live loading extends the service life between maintenance periods by requiring less statements. Belleville springs are employed to provide constant packing gland stress.   Yoke Sleeve Furnished in aluminum bronze to reduce operating torque. Most size furnished with ball bearing yoke sleeves.   Lantern Ring & Double Packing Set Lantern ring leak-off frtting connection & double packing stack is optionally available for critical services.   Seat Rings Separate heavy duty, full ported rings for easy maintenance. Screwed or welded connection into body.   Range Of Materials Standard body/bonnet materials include nine grades of carbon, low alloy & stainless steels. For special applications they can be supplied in other grades of alloy& stainless steeL Threre's a full range of trim materials to match any service optional packing & gasket materials are available for a full range of service conditions.   OS & Y Outside screw and yoke. Cast steel gate valve yoke integral with bonnet for 1O& smalL   BB Bolted bonnet Welding bonnet and pressure seal bonnet in services requiring frequent cycling or with high pressure/tempareture variations.   End Connections A choice of flanged, RTJ flanged or butt welding end for piping flexibility.   Body To Bonnet Joint A flat face gasket joint is used in the 150lb to 600Lb valves. Ring joint is used in the body to bennet connection in 900lb & higher rated valves.   DISC All Plug disc is stem guided on all size. Disc has a differential angle front the seat to provide a line contact for maximum sealing. The bottom of V-port disc is feuded by the body seat ring for maximum disc stability in throttling applications. the soft teflon ring is excellent for lower temperature service where tight shut off required.

Aided with innovative technology, we are extensively engaged in offering Metal Globe Valve. The offered valve is manufactured by our adept professionals with innovation at our hi-tech manufacturing unit in adherence to the predefined industry standards. Moreover, the provided valve is widely demanded for perfect finish, standard quality and high strength features. Furthermore, we offer this valve to our esteemed clients at industry leading prices. Features: Accurate dimensions Durable Rust-proof Globe Valve: (DIN STD - ND-40 TYPE)Globe Valve is most suitable for high temperature and high pressure applications for a wide range of fluids.Globe Valve is provided with one Graphite ring to restrict gland leakage, supported with numerous Graphited Spiral wound gasket packing, specially for high temperature application.

• Material: Metal
• Certification: ISI Certified
• Application: Gas Fitting, Water Fitting
• Color: Grey
• End Connection: Flanged, Screwed
• Size: 100-150mm
• Pressure: High, Low, Medium
• Temperature Of Media: Low Temperature

The company has come up as one of the reliable Manufacturers, Exporters and Suppliers of Gate Valves in Ahmedabad. The Gate Valves, offered by the company, are known for their quality as well as extensive utility in the industrial sector. The company offers the very best Gate Valves at the market leading prices. Highlights Of Gate Valves Highly durable Excellent performance Reliable and efficient Made using quality materials Technical Data Manufacturing Std : API 602 Testing & Insp. Std : API 598 Face to Face : As per ANSI B16.10 Butt Weld ends : As per ANSI B16.25 Socketweld & Screwed to ANSI B16.11 & ANSI B 1.20.1

• Size Range: 15MM TO 300MM
• End Connection: ASA CLASS 150, TABLE-D/E, DIN 2533
• BODY: CAST IRON, CAST STEEL, S.S. 304/316, ALUMINIUM , P.P.,PVC.
• MFG.STD: BS 5156
• INSP.Test STD: BS 5146
• Face To Face: DIN 3202
• Body Pressure: PN 10
• Spark Test of Rubber Lined: 10KV
• Temperature Range: FORM 10*C(‐14*F)UP TO + 170”c(+350*F) DEPENDING ON MATERIALS.
• Operated: MANUAL, Spring Diaphragm Actuator Operated.

• Pressure Rating: Pressure rating
• Manufacturing Standard: Manufacturing Standard
• API 600 / API 6D / BS 1414: API 600 / API 6D / BS 1414
• End to end dimensions: End to end dimensions
• ANSI B 16.10 / DIN 3230: ANSI B 16.10 / DIN 3230
• Inspection & Test Std.: Inspection & Test Std.
• API 598 / BS 6755: API 598 / BS 6755
• Ends: Ends
• Flanged to ANSI B 16.5 BS 10 BUTTWELD to ANSI B 16.25: Flanged to ANSI B 16.5 BS 10 BUTTWELD to ANSI B 16.25
• Range: Range
• SIZE 2: SIZE 2
• ANSI 150# - 2500# DIN PN6 - PN 250: ANSI 150# - 2500# DIN PN6 - PN 250

• Intergrated body structure, better accuracy, higher ultimate vacuum• Forced oil cycling system, more reliable, longer lifetime• Big sight glass for monitoring oil level    

M fenders are widely used on the bow or stern of boats or on the corners of docks or pontoons. The M shape of this fender provides flexibility and it can therefore easily follow the contour of a bow or stern. This type of fender has a wide and flexible contact surface. The grooves on the top provide extra grip and three flexible legs to ensure good contact and sturdy attachment. M fenders can be mounted on a small radius and they are relatively lighter than W fenders. The three mounting holes in M fenders facilitate easy and accurate installation.

drywall screw, Fencing Wire, shutter locks, hex head self drilling screw

• Brand Name: PROLINE VALVES MAKE
• Material: ALL TYPES OF MATERIAL
• Structure: Hand wheel type
• Media: WATER, AIR, OIL, STEAM, VACUUM, VARIOUS CHEMICAL, SLURRY, CHILLER WATER AND MANY MORE
• Country of Origin: AHMEDABAD
• Power: ALL TYPES OF POWER AVAILABLE WITH ELECTRICAL ACTUATOR OPERATION
• Pressure: PN 05, PN 10, PN 16, 150 #, 300# 600#
• Port Size: 15 MM TO 500 MM
• Temperature Of Media: UPTO 450 DEGREE
• heavy design: quick delivery
• LESS PRICES: long functional life

Gate Valves, ms pipe fitting, Fasteners, Studs, Nuts, Bolts

Nut Fastener, Bolts, Washers, Screws

Life Rafts, Navigation Equipment, Telecommunication Equipment

Diaphragm Valve, Plug Valves, Ball Valve, Non Return Valve, Butterfly Valve

Gear Pumps, Industrial Pump, Chemical Process Pump, Boiler Feed Pumps

Diaphragm Valve, Stainless Steel Check Valves, Knife Gate Valve

Gate Valves, Globe Valves, nrv valves, Butterfly Valves

Fittings, Stainless Steel Pipes, Stainless Steel Channels, Carbon Plates