Melting Machine Dealers in Ahmedabad

• Coating Width: 400-2000mm
• Coating Amount: 20-200g/M2
• Coating Speed: 50m/Min
• Roll Diameter: 1000mm
• Roll Diameter: 700mm
• Deviation Correction Device: 2set
• Length: 5000mm
• Height: 1400mm

Main Feature of HOT MELT ADHESIVE TAPE COATING MACHINE : The Host Speed And Glue Speed Can Be Adjusted Manually Or Automatically Track. Using Intelligent Pid Temperature Control System, The Error Is Within 1 Degree. All The Active Rollers And Passive Rollers Are Calibrated With High-Precision Balancing Equipment, Supplemented By Reasonable Installation Techniques. The Whole Machine Runs Smoothly With Low Noise, And The Composite Material Does Not Wrinkle. The Effect Is Good. High-Precision Alloy Die And High-Precision Metering Gear Pump To Ensure High-Quality Coating Effect. Replace The Fiber Spray System, Can Achieve Pe Film And Non-Woven Composite. The Special Filter Material Is Compounded, The Shoe Material And Clothing Material Are Compounded, The Medical Material Is Compounded, The Special Material Is Compounded, And The Fiber Spray Is Comparatively Uniform And Exquisite And Has Breathability. The Device Can Be Equipped With A Dedicated Pur Hot Melt Machine, Enabling The Device To Be Used For The Compounding Of High-Grade Materials.

• Power: 1500Watts
• Weight: 35 kg
• Material: S.S. Body.
• Electrical: 230V;50Hz;1phase.
• Capacity: 1kg ; 2kg; 3kg Gold 24crt.
• Temperature: 30ºC to 1180ºC.
• Dimensions: 14”X14”X20” (LXWXH in Inches) approx

1kg Gold Melting with resistance heating technique. Digital PID Temperature Controller.

• Power: 380V,3 Phase,50Hz/2KW
• Bottle Sizes: 200ml-1.5Lit

Durable and compact design, the machine frame is covered by stainless steel sheet, anti-vibration and noise absorbing construction. Rotary motor driven machine design, Control cabinet integrated in the machine housing, Hot melt dispensing spray guns , Non-contact labeling system, Cutter is easy adjustment and replacement, cutting at any speed with precision, Vacuum drum is synchronized with platform rotation, driven by servo motor (Allen Bradley brand), Label web tracking for correcting its height and guarantee the consistent position, Auto splicing system for continuous operation.

For product’s individuation and competitiveness,the container needs various shape and labels. The automatic hot melt glue labeling machine fits various labeling product. The container is fed to carousel , The container is held top and bottom in the carousel during the label application process. The labeling is controlled by a continuous/automatic correcting system. The labeling is cut onto a drum provided with rotating blade and static blade which is simple and reliable to supply a correct cutting. The hot melt is spread on one edge of the labeling and the overlap on vacuum drum. The labeling process is complete in the labeling station in a short time。 Features: Siemens PLC controls Nordson hot melt glue system It is available to label various shape containers, especially square container The container and labeling changeovers are simple,easy to change and install

Auto hot melt glue labeling machine Linear Type The container is fed to carousel , The container is held top and bottom in the carousel during the label application process. The labeling is controlled by a continuousautomatic correcting system. The labeling is cut onto a drum provided with rotating blade and static blade which is simple and reliable to supply a correct cutting. The hot melt is spread on one edge of the labeling and the overlap on vacuum drum. The labeling process is complete in the labeling station in a short time.

• Brand Name: Dtpl
• Model Name/Number: Choco Dipper for Ice Cream
• Capacity: 3 Liter
• Melting Material: Chocolate
• Machine Type: For Making Chocobar (Softy)
• Machine Body Material: Stainless Steel
• Heaters: Yes
• Phase: 1 Phase

• Power: 5 KW to 100 KW
• Country of Origin: Made in India
• Power Type: Electric
• Usage/Application: Industrial
• Max Temperature: 1250 Degree C
• Automation Grade: Manual
• I Deal In: New and Second Hand
• Features: Flawless performance, Low maintenance cost, Rugged design.

A leading manufacturer of Induction equipments. Induction Melting, Induction Heating, Induction Welding, Continuous Galvanizing and Vacuum Assisted Heating and Melting Applications. With a strong presence in the Asian sub-continent, Inductotherm provides customers with industry expertise, process engineering, design and development with 247 service and support.

Lamination Of Textile To Textile, Textile To Foam, Textile To Membrane, Textile To Films, Nonwoven To Nonwoven, Textile To Nonwoven The machine is suitable with ADHESIVES POLYMERS SUCH AS PE (LDPE, HDPE), PP, Polyester, Polyamide, EVA, Polyurethanes, Reactive PUR

Minute-wise System Electrical Parameter (Like Input Voltage, Power, Capacitor Voltage, Coil Frequency & etc) - For 2 months period.Minute-wise Report for Water Temperature (Like Panel DM Water, Cooling Water In & Out, Coil Water Inlet, each path of Coil Water Outlet) - For 2 months period. Automatic Sintering cycle can be programmed as per users requirement.

• Voltage: 220V
• Frequency: 50-60 HZ
• Material: Cast Iron
• Automatic Grade: Automatic
• Max Temperature (degree Celsius): 0-500
• Material Loading Capacity: 500-1500 kg
• Finish: Polished
• Minimum Order Quantity: 1 Piece

The Melt Flow Index Test measures the rate of extrusion of a Thermoplastic material through orifice of Specific Length and Diameter under prescribed conditions of temperature and pressure. The "Saumya" MFI Tester are built to measure Melt Flow Rate with greater accuracy as prescribed in different national and international standards.       STANDARDS:   ASTM D 1238 METHOD A & B, ISO 1133, IS 2508/2530,BS and other equivalent standards.     Melt Flow Index Tester Model: MFI-AE (Manual Model) Melt Flow Index Tester Model: MFI-AC (Semi Auto Model) Melt Flow Index Tester Model: MFI-AFA & AFB (Fully Automatic Model) APPLICATION :   Melt Flow Indexer is used to measure the flow rate of different polymers. The reported Melt Index values helps to distinguish between the different Grades of Polymers. This is due to the fact that plastic materials are seldom manufactured without incorporating additives, which affect the processing characteristics of material like stability and flowability.   USP:   The "Saumya" provides MFI tester with customized controller keeping in mind the process of test. Single Instrument with Temp. cont. and Timer. Precise temp. with accuracy of +/- 0.1 °C. Microprocessor based digital timer with facility to select number of test, cuter time, buzzer indication on completion of test and advance buzzer indication for manual cutting procedure. Fully Automatic MFI is having facility to conduct to test independently by pre-setting the temp. of test, time & applying the required Load and it will directly give the result of MFI for individual test & average of all test.    

where is a process used to harden, joining or soften metals or other conductive materials. In modern manufacturing processes, induction heating offers an attractive combination of speed, consistency and control and energy efficiency. The basic principles of induction heating furnace have been applied to the production from the 20s During the Second World War, technology developed rapidly to meet urgent requirements in wartime: to create reliable and fast processes to harden metal parts motor.

• Label Width: 50mm Min, 105mm Max
• Label Length: 200mm Min, 300mm Max

Automatic BOPP Labeling Machine offered comprise hot melt labeling machines that can be made available by us in different operating model options to choose from. Featuring automatic operations, these can handle bottles of different size capacities as well as in varied production speeds. The use of superior grade stainless steel in construction also makes these machines deliver optimum performance support. These machines find suitability in meeting the labeling demands of products like bottles, jars, vial, tin and other packaging in round finish form. Further, the presence of micro processor control based label dispensing system as well as advanced sensing system for label and products also assure of optimum support in involved processes.

• Brand Name: HK Malvi
• Material Loading Capacity: 0-500 kg
• Automation Grade: Semi-Automatic
• Melting Material: GOLD
• Max Temperature (degree Celsius): 1000-1500 degree Celsius
• Colour: Grey, White

silver melting machine, Zinc Plating Machine

BOPP Hot Melt Glue Labeling Machine, pet shrink sleeves

Fully Automatic Hot Melt Glue Labeling Machine, Water Treatment Plants

melting furnace machine, ss wire, Hose Pipe Clamp, strip clamp