Membrane Filters Dealers in Ahmedabad

Porex® Tubular Membrane Filter (TMF) modules contain the unique, patent-pending, structural membrane tubes. The superior strength of the membrane/substrate composite allows higher operating and backwash pressures for higher flux and reduced system footprint. The structural composite membrane features PVDF membrane bonded to PVDF substrate or anchored to PE substrate.   Features : Higher pressure resistance Increased flux Reduced system size Improved back pulse efficiency FDA and NSF Approved   Typical Applications : Heavy metal removal in metal finishing fluids Pre-reverse osmosis filters for water treatment High solids removal in electroplating solution baths High solids removal from completion fluids Food and beverage processing Cutting fluids recycling in silica grinding and slicing Heavy metal removal from incinerator scrubber water Cooling tower blow-down recycling and/or side stream filtration Brine recycling in water treatment systems Wastewater processing from the chemical, micro-electronics and pulp and paper Industries.

The PTFE membrane filter bag is manufactured using high grade raw material. The PTFE membrane is laminated to the proper, suitable media to enhance the capacity of the filter media. The support media of the filter bags provides the physical support for the operation, and the filtration would takes place by the surface of the PTFE membrane. The PTFE membrane filter bag with enhanced surface filtration properties, are capable to filter the much finer dust. The complete dust cake is found on the surface of the PTFE membrane. It is easier to remove the dust cake from the filter bag.

• Diameter :: 2.7"
• End Conn. :: DOE , Code - 7 Type
• Micron Size :: 0.2, 0.45

This filter are used for solvents as well as compressed gas and vent filters.As required by FDA , the filter cartridge is a precision filter product that combines the benefit of both a pre filter and final filter in one device to provide reliable and consistent performance.

Syringe & Membrane Filters Our filters are available in a variety of different materials and diameter sizes to meet your applications and test equipment.

• Features: Sturdy structure, Efficient functionality, Low maintenance
• Applications: Mineral Water Plants, Poultry Farms, Dairy Plants, Food Processing Units
• Purified Water Capacity: 100 gallon/Day
• Salt Resistant Rate: above 95%
• RO membrane: 75 GPD

Ceramic membrane is a porous fine ceramic filter which is sintered from Alumina, Titania or Zirconia under ultra high temperature. Ceramic membrane normally has an asymmetrical structure with porous support active membrane layer. The macro porous support ensures the mechanical resistance while the active layer functions separation ranging from Micro filtration, Ultra filtration and even Nano filtration (from 10nm down to 1KD). Ceramic Membrane always runs at a Cross Flow Filtration mode. The turbid fluid goes through membrane layer inside the single channel or a multi channel at a high velocity. Driven by Trans Membrane Pressure (TMP), the clean liquid with micro-molecule pass through the membrane layer vertically to permeation, the solid and big molecule is rejected in retenate. The feed fluid is thus clarified, concentrated and purified.

Membrane Filters, Weighing Balance, Syringe Filter, Standard Weights

Membrane Filter, borosil glass ware, environment laboratory product

MEMBRANES & FILTERS, RETENTION BASED SERVICES